CNS 4434 - 1993 Round Nuts With Drilled Holes In One Face

Unit: mm

台湾CNS 4434 - 1993 CNS4434 4434CNS Round Nuts With Drilled Holes In One Face

Thread Size
d

(M2.3)

M2.5

(M2.6)

(M3.5)

M10

d_k
d₀
k
t	min
	max
per 1000 units≈kg

5.5	6	7	7	8	9	10	12	14	18	22
1	1	1.2	1.2	1.5	1.5	1.5	2	2.5	3	3.5
2	2	2.2	2.2	2.5	3	3.5	4.2	5	6.5	8
/	/	/	/	1.3	1.8	1.8	2.3	2.8	3.3	3.8
/	/	/	/	1.7	2.2	2.2	2.7	3.2	3.8	4.3
0.31	0.37	0.56	0.55	0.83	1.26	1.83	3.08	4.93	10.5	19.3

Send Inquiry

Similar Standards

1	[GB] GB 810 - 1988	Small Round Nuts
2	[GB] GB 812 - 1988	Round Nuts
3	[GB] GB /T 9160.2 (KM) - 2017	Rolling Bearing Accessories - Locknuts - KM Series
4	[GB] GB /T 9160.2 (KML) - 2017	Rolling Bearing Accessories - Locknuts - KML Series
5	[GB] GB /T 9160.2 (HM) - 2017	Rolling Bearing Accessories - Locknuts - HM Series
6	[GB] GB /T 9160.2 (HML) - 2017	Rolling Bearing Accessories - Locknuts - HML Series
7	[GB] GB /T 9160.2 (MS) - 2017	Rolling Bearing - Locking Clips - MS Series
8	[GB] GB /T 9160.2 (MSL) - 2017	Rolling Bearing - Locking Clips - MSL Series
9	[GB] GB /T 9160.2 (KM) - 2006	Rolling Bearing Accessories - Locknuts - KM Series
10	[GB] GB /T 9160.2 (KML) - 2006	Rolling Bearing Accessories - Locknuts - KML Series
11	[GB] GB /T 9160.2 (HM) - 2006	en:Rolling Bearing Accessories - Locknuts - HM Series
12	[GB] GB /T 9160.2 (HML) - 2006	Rolling Bearing Accessories - Locknuts - HML Series
13	[GB] GB /T 9160.2 (MS) - 2006	Rolling Bearing - Locking Clips - MS Series
14	[GB] GB /T 9160.2 (MSL) - 2006	Rolling Bearing - Locking Clips - MSL Series
15	[GB] GB 815 - 1988	Round Nuts With Drilled Holes In One Face
16	[GB] GB 816 - 1988	Round Nuts With Set Pin Holes In Side
17	[GB] GB 817 - 1988	Slotted Round Nuts
18	[GB] GB 9160.3 (KM) - 1988	Rolling Bearing Accessories - Locknuts - KM Series
19	[GB] GB 9160.3 (KML) - 1988	Rolling Bearing Accessories - Locknuts - KML Series
20	[GB] GB 9160.3 (HM) - 1988	Rolling Bearing Accessories - Locknuts - HM Series
21	[GB] GB 9160.3 (HML) - 1988	Rolling Bearing Accessories - Locknuts - HML Series
22	[DIN] DIN 981 (HM) - 2009	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
23	[DIN] DIN 981 (KM) - 2009	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
24	[DIN] DIN 981 (HM) - 1993	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
25	[DIN] DIN 981 (KM) - 1993	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
26	[DIN] DIN 981 (KM) - 1983	Rolling bearings - Locknuts
27	[DIN] DIN 546 - 2010	Slotted Round Nuts
28	[DIN] DIN 82013 - 2010	Cargo lifting gear - Accessories and fittings for lifting - Round nuts
29	[DIN] DIN 548 - 2007	Round nuts with set pin holes in side
30	[DIN] DIN 547 - 2006	Round Nuts With Drilled Holes In One Face
31	[DIN] DIN 70852 - 1989	Groove Nuts
32	[DIN] DIN 546 - 1986	Slotted round nuts
33	[DIN] DIN 547 - 1986	Round nuts with drilled holes in one face
34	[DIN] DIN 548 - 1986	Round nuts with set pin holes in side
35	[DIN] DIN 1804 - 1971	Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
36	[DIN] DIN 1816 - 1971	Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
37	[DIN] DIN 703 - 1955	Shaft collar axle flande mounting shaft collar
38	[ISO] ISO 2982-2 - 2013	Locknut With 4 Slots
39	[ISO] ISO 2982-2 - 2013	Locknuts With 8 Slots
40	[JIS] JIS B 1554 (AN,HN/ANL,HNL) - 2016	Locknuts with 4 slots
41	[JIS] JIS B 1554 (AN/ANL) - 2016	Locknuts with 8 slots
42	[NF] NF E 22-111 - 1969	Locknuts - Heavy Series
43	[NF] NF E 27-413 - 1959	Slotted Round Nuts
44	[CNS] CNS 4433 - 1993	Round Nuts With Set Pin Holes In Side
45	[CNS] CNS 4465 - 1978	Round Nuts
46	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
47	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-000
48	[ANSI] ANSI /ABMA 8.2 - 1999	Removal Nut Dimensions Inch Design Series RN and ARN