Click Specification

Locknut Dimensions Inch Design Series N-000

ANSI /ABMA 8.2 - 1999

Display drawing:

Nominal Diameter
d

4.325

4.716

5.106

5.497

5.888

6.284

6.659

7.066

7.472

7.847

8.628

9.442

Code
k₁
M₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
U	min (inch)
L₁	min (inch)
Y	min (inch)
T₁
s₁	min (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	min (mm)
H	max (mm)
U	min (mm)
L₁	min (mm)
Y	min (mm)
s₁	min (mm)

N-022	N-024	N-026	N-028	N-030	N-032	N-034	N-036	N-038	N-040	N-044	N-048
12	12	12	12	12	8	8	8	8	8	8	6
/	/	/	/	/	/	/	/	/	/	/	/
5.318	5.693	6.130	6.505	7.130	7.505	7.880	8.255	8.693	9.443	10.255	11.443
4.901	5.313	5.703	6.109	6.688	7.094	7.484	7.875	8.266	8.750	9.531	10.625
0.791	0.823	0.885	0.948	0.979	1.041	1.073	1.104	1.135	1.198	1.260	1.354
0.485	0.485	0.485	0.485	0.610	0.610	0.610	0.610	0.610	0.735	0.860	0.860
0.198	0.198	0.198	0.198	0.229	0.229	0.229	0.229	0.229	0.323	0.385	0.385
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	10.423
/	/	/	/	/	/	/	/	/	/	/	5/16-18
/	/	/	/	/	/	/	/	/	/	/	0.625
135.08	144.60	155.70	165.23	181.10	190.63	200.15	209.68	220.80	239.85	260.48	290.65
124.49	134.95	144.86	155.17	169.88	180.19	190.09	200.03	209.96	222.25	242.09	269.88
20.09	20.90	22.48	24.08	24.87	26.44	27.25	28.04	28.83	30.43	32.00	34.39
12.32	12.32	12.32	12.32	15.49	15.49	15.49	15.49	15.49	18.67	21.84	21.84
5.03	5.03	5.03	5.03	5.82	5.82	5.82	5.82	5.82	8.20	9.78	9.78
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	264.74
/	/	/	/	/	/	/	/	/	/	/	15.88

Nominal Diameter
d

10.192

11.004

11.785

12.562

13.339

14.170

14.957

15.745

16.532

17.319

18.107

18.894

Code
k₁
M₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
U	min (inch)
L₁	min (inch)
Y	min (inch)
T₁
s₁	min (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	min (mm)
H	max (mm)
U	min (mm)
L₁	min (mm)
Y	min (mm)
s₁	min (mm)

N-052	N-056	N-060	N-064	N-068	N-072	N-076	N-080	N-084	N-088	N-092	N-096
6	6	6	6	/	/	/	/	/	/	/	/
/	/	/	/	5	5	5	5	5	5	5	5
12.193	13.005	14.193	15.005	15.755	16.505	17.755	18.505	19.318	20.505	21.255	22.068
11.406	12.219	13.219	14.031	14.813	15.500	16.625	17.438	18.188	19.250	20.688	20.750
1.416	1.510	1.573	1.666	1.791	1.791	1.916	2.073	2.073	2.385	2.385	2.385
0.860	0.980	0.980	0.980	0.980	1.230	1.230	1.230	1.355	1.355	1.355	1.480
0.385	0.385	0.510	0.510	0.510	0.510	0.604	0.604	0.604	0.604	0.604	0.604
/	/	/	/	13.355	14.186	14.973	15.761	16.548	17.335	18.123	18.910
/	/	/	/	0.375	0.375	0.375	0.375	0.375	0.375	0.375	0.375
11.298	12.110	13.110	13.860	14.735	15.485	16.485	17.235	18.110	19.110	19.985	20.673
5/16-18	5/16-18	3/8-16	3/8-16	3/8-16	3/8-16	1/2-13	1/2-13	1/2-13	5/8-11	5/8-11	5/8-11
0.625	0.625	0.750	0.750	0.750	0.750	0.875	0.875	0.875	1.250	1.250	1.250
309.70	330.33	360.50	381.13	400.18	419.23	450.98	470.03	490.68	520.83	539.88	560.53
289.71	310.36	335.76	356.39	376.25	393.70	422.28	442.93	461.98	488.95	525.48	527.05
35.97	38.35	39.95	42.32	45.49	45.49	48.67	52.65	52.65	60.58	60.58	60.58
21.84	24.89	24.89	24.89	24.89	31.24	31.24	31.24	34.42	34.42	34.42	37.59
9.78	9.78	12.95	12.95	12.95	12.95	15.34	15.34	15.34	15.34	15.34	15.34
/	/	/	/	339.22	360.32	380.31	400.33	420.32	440.31	460.32	480.31
/	/	/	/	9.53	9.53	9.53	9.53	9.53	9.53	9.53	9.53
286.97	307.59	332.99	352.04	374.27	393.32	418.72	437.77	459.99	485.39	507.62	525.09
15.88	15.88	19.05	19.05	19.05	19.05	22.23	22.23	22.23	31.75	31.75	31.75

Nominal Diameter
d

19.682

20.867

22.048

23.623

24.804

26.379

27.961

29.536

31.504

33.473

35.441

37.410

Code
k₁
M₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
U	min (inch)
L₁	min (inch)
Y	min (inch)
T₁
s₁	min (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	min (mm)
H	max (mm)
U	min (mm)
L₁	min (mm)
Y	min (mm)
s₁	min (mm)

N-500	N-530	N-560	N-600	N-630	N-670	N-710	N-750	N-800	N-850	N-900	N-950
/	/	/	/	/	/	/	/	/	/	/	/
5	4	4	4	4	4	3	3	3	3	3	3
22.818	24.818	25.568	27.568	28.755	30.693	32.693	34.255	36.255	38.568	40.568	43.005
21.688	23.250	24.000	26.000	27.125	29.125	30.688	32.313	34.250	36.375	36.375	40.500
2.703	2.703	2.953	2.953	2.953	3.140	3.578	3.578	3.578	3.578	3.953	3.953
1.480	1.605	1.605	1.605	1.855	1.855	1.980	2.230	2.230	2.480	2.480	2.480
0.604	0.823	0.823	0.823	0.823	0.823	1.010	1.010	1.010	1.010	1.010	1.010
19.698	20.887	22.068	23.643	24.824	26.399	27.988	29.563	31.531	33.500	35.468	37.437
0.375	0.500	0.500	0.500	0.500	0.500	0.688	0.688	0.688	0.688	0.688	0.688
21.610	23.360	24.110	25.923	27.235	28.985	30.610	32.235	34.610	36.485	38.610	40.610
5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	3/4-10	3/4-10	3/4-10
1.250	1.250	1.250	1.250	1.250	1.250	1.250	1.250	1.250	1.500	1.500	1.500
579.58	630.38	649.43	700.23	730.38	779.60	830.40	870.08	920.88	979.63	1030.43	1092.33
550.88	590.55	609.60	660.40	688.98	739.78	779.48	820.75	869.95	923.93	974.73	1028.70
68.66	68.66	75.01	75.01	75.01	79.76	90.88	90.88	90.88	90.88	100.41	100.41
37.59	40.77	40.77	40.77	47.12	47.12	50.29	56.64	56.64	62.99	62.99	62.99
15.34	20.90	20.90	20.90	20.90	20.90	25.65	25.65	25.65	25.65	25.65	25.65
500.33	530.53	560.53	600.53	630.53	670.53	710.90	750.90	800.89	850.90	900.89	950.90
9.53	12.70	12.70	12.70	12.70	12.70	17.48	17.48	17.48	17.48	17.48	17.48
548.89	593.34	612.39	658.44	691.77	736.22	777.49	818.77	879.09	926.72	980.69	1031.49
31.75	31.75	31.75	31.75	31.75	31.75	31.75	31.75	31.75	38.10	38.10	38.10

Send Inquiry

Similar Standards

1	[DIN] DIN 70852 - 1989	Groove Nuts
2	[DIN] DIN 981 (KM) - 1993	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
3	[DIN] DIN 546 - 1986	Slotted round nuts
4	[DIN] DIN 981 (HM) - 2009	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
5	[DIN] DIN 548 - 2007	Round nuts with set pin holes in side
6	[DIN] DIN 703 - 1955	Shaft collar axle flande mounting shaft collar
7	[ISO] ISO 2982-2 (4 Slot) - 2013	Rolling bearings - Accessories - Locknut with 4 Slots
8	[DIN] DIN 546 - 2010	Slotted Round Nuts
9	[DIN] DIN 547 - 1986	Round nuts with drilled holes in one face
10	[DIN] DIN 1816 - 1971	Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
11	[DIN] DIN 548 - 1986	Round nuts with set pin holes in side
12	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
13	[ANSI] ANSI /ABMA 8.2 - 1999	Removal Nut Dimensions Inch Design Series RN and ARN
14	[DIN] DIN 981 (KM) - 1983	Rolling bearings - Locknuts
15	[ISO] ISO 2982-2 (8Slot) - 2013	Rolling bearings - Accessories - Locknuts With 8 Slots
16	[DIN] DIN 981 (KM) - 2009	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
17	[DIN] DIN 82013 - 2010	Cargo lifting gear - Accessories and fittings for lifting - Round nuts
18	[DIN] DIN 1804 - 1971	Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
19	[DIN] DIN 981 (HM) - 1993	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
20	[DIN] DIN 547 - 2006	Round Nuts With Drilled Holes In One Face
21	[GB] GB 9160.3 (HM) - 1988	Rolling Bearing Accessories - Locknuts - HM Series
22	[JIS] JIS B 1119 (3SR) - 1986	Spectacle Frames - Recessed Round Nuts
23	[GB] GB /T 9160.2 (MSL) - 2006	Rolling Bearing - Locking Clips - MSL Series
24	[GB] GB 817 - 1988	Slotted Round Nuts
25	[GB] GB 9160.3 (KM) - 1988	Rolling Bearing Accessories - Locknuts - KM Series
26	[NF] NF E 27-413 - 1959	Slotted Round Nuts
27	[GB] GB 810 - 1988	Small Round Nuts
28	[GB] GB /T 9160.2 (KM) - 2017	Rolling Bearing Accessories - Locknuts - KM Series
29	[GB] GB 816 - 1988	Round Nuts With Set Pin Holes In Side
30	[JIS] JIS B 1554 (AN/ANL) - 2016	Locknuts with 8 slots
31	[GB] GB /T 9160.2 (HM) - 2006	en:Rolling Bearing Accessories - Locknuts - HM Series
32	[GB] GB /T 9160.2 (KM) - 2006	Rolling Bearing Accessories - Locknuts - KM Series
33	[GB] GB 9160.3 (KML) - 1988	Rolling Bearing Accessories - Locknuts - KML Series
34	[GB] GB /T 9160.2 (HML) - 2017	Rolling Bearing Accessories - Locknuts - HML Series
35	[GB] GB 815 - 1988	Round Nuts With Drilled Holes In One Face
36	[GB] GB /T 9160.2 (MS) - 2017	Rolling Bearing - Locking Clips - MS Series
37	[GB] GB 9160.3 (HML) - 1988	Rolling Bearing Accessories - Locknuts - HML Series
38	[GB] GB /T 9160.2 (MSL) - 2017	Rolling Bearing - Locking Clips - MSL Series
39	[GB] GB /T 9160.2 (MS) - 2006	Rolling Bearing - Locking Clips - MS Series
40	[GB] GB 812 - 1988	Round Nuts
41	[GB] GB /T 9160.2 (HM) - 2017	Rolling Bearing Accessories - Locknuts - HM Series
42	[GB] GB /T 9160.2 (KML) - 2006	Rolling Bearing Accessories - Locknuts - KML Series
43	[GB] GB /T 9160.2 (HML) - 2006	Rolling Bearing Accessories - Locknuts - HML Series
44	[JIS] JIS B 1554 (AN,HN/ANL,HNL) - 2016	Locknuts with 4 slots
45	[GB] GB /T 9160.2 (KML) - 2017	Rolling Bearing Accessories - Locknuts - KML Series
46	[NF] NF E 22-111 - 1969	Locknuts - Heavy Series
47	[GOST] GOST 11871 - 1988	Slotted round nuts, product grade A
48	[CNS] CNS 4433 - 1993	Round Nuts With Set Pin Holes In Side
49	[CNS] CNS 4434 - 1993	Round Nuts With Drilled Holes In One Face
50	[CNS] CNS 4465 - 1978	Round Nuts