简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Rolling Bearing Accessories - Locknuts - KML Series

GB /T 9160.2 (KML) - 2006

Display drawing:

国标GB /T9160.2 (KML) - 2006 GB9160.2 9160 Rolling Bearing Accessories - Locknuts - KML Series
Nominal Diameter
d
M120 M130 M140 M150 M160 M170 M180 M190 M200
Code
P Pitch
d1
d2
B
b
h
Applicable Model of lock washer
KML 24 KML 26 KML 28 KML 30 KML 32 KML 34 KML 36 KML 38 KML 40
2 2 2 2 3 3 3 3 3
135 145 155 170 180 190 200 210 222
145 155 165 180 190 200 210 220 240
20 21 22 24 25 26 27 28 29
12 12 14 14 16 16 18 18 18
5 5 5 5 5 5 5 5 8
MBL 24 MBL 26 MBL 28 MBL 30 MBL 32 MBL 34 MBL 36 MBL 38 MBL 40

Alternative history

GB /T 9160.2KML - 2006 GB /T 9160.2KML - 2017
Send Inquiry

Similar Standards

1 Removal Nut Dimensions Inch Design Series RN and ARN [ANSI]
ANSI /ABMA 8.2 - 1999 		Removal Nut Dimensions Inch Design Series RN and ARN
2 Cargo lifting gear - Accessories and fittings for lifting - Round nuts [DIN]
DIN 82013 - 2010 		Cargo lifting gear - Accessories and fittings for lifting - Round nuts
3 Rolling bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling bearings - Locknuts
4 Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
5 Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
6 Round nuts with drilled holes in one face [DIN]
DIN 547 - 1986 		Round nuts with drilled holes in one face
7 Rolling bearings - Accessories - Locknuts With 8 Slots [ISO]
ISO 2982-2 (8Slot) - 2013 		Rolling bearings - Accessories - Locknuts With 8 Slots
8 Slotted round nuts [DIN]
DIN 546 - 1986 		Slotted round nuts
9 Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread [DIN]
DIN 1816 - 1971 		Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
10 Round nuts with set pin holes in side [DIN]
DIN 548 - 1986 		Round nuts with set pin holes in side
11 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
12 Round Nuts With Drilled Holes In One Face [DIN]
DIN 547 - 2006 		Round Nuts With Drilled Holes In One Face
13 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
14 Shaft collar axle flande mounting shaft collar [DIN]
DIN 703 - 1955 		Shaft collar axle flande mounting shaft collar
15 Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
16 Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
17 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
18 Rolling bearings - Accessories - Locknut with 4 Slots [ISO]
ISO 2982-2 (4 Slot) - 2013 		Rolling bearings - Accessories - Locknut with 4 Slots
19 Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
20 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
21 Round nuts with set pin holes in side [DIN]
DIN 548 - 2007 		Round nuts with set pin holes in side
22 Small Round Nuts [GB]
GB 810 - 1988 		Small Round Nuts
23 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2006 		Rolling Bearing - Locking Clips - MSL Series
24 Round Nuts With Drilled Holes In One Face [GB]
GB 815 - 1988 		Round Nuts With Drilled Holes In One Face
25 Round Nuts With Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts With Set Pin Holes In Side
26 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
27 Spectacle Frames - Recessed Round Nuts [JIS]
JIS B 1119 (3SR) - 1986 		Spectacle Frames - Recessed Round Nuts
28 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
29 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
30 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
31 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
32 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
33 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
34 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
35 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
36 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
37 Locknuts with 4 slots [JIS]
JIS B 1554 (AN,HN/ANL,HNL) - 2016 		Locknuts with 4 slots
38 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
39 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
40 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2017 		Rolling Bearing - Locking Clips - MSL Series
41 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2006 		Rolling Bearing - Locking Clips - MS Series
42 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
43 Locknuts with 8 slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 slots
44 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
45 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2017 		Rolling Bearing - Locking Clips - MS Series
46 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
47 Slotted round nuts, product grade A [GOST]
GOST 11871 - 1988 		Slotted round nuts, product grade A
48 Round Nuts With Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts With Set Pin Holes In Side
49 Round Nuts With Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts With Drilled Holes In One Face
50 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts