About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

(Non-preferred) dimensions in parentheses.

Unit:mm

Round Nuts with Set Pin Holes in Side

DIN 548 - 1986

Display drawing:

德标DIN 548 - 1986 DIN548 548DIN Round Nuts with Set Pin Holes in Side
Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs
Default density g/cm3
×

Choose materials based on density.(g/cm3)

  • Carbon Steel 7.85
  • Stainless Steel 8.1
  • Stainless Steel 7.95
  • Stainless Steel 7.7
  • Titanium Alloy 4.5
  • Aluminum Alloy 2.8
  • Copper 8.89


Select here or enter material density on the calculation page.
Thread Size
d
M2 M2.5 M3 (M3.5) M4 M5 M6 M8 M10
P Pitch
d1 min=nominal size
max
dk max=nominal size
min
m max=nominal size
min
t min
max
per 1000 units ≈ kg
0.4 0.45 0.5 0.6 0.7 0.8 1 1.25 1.5
1 1.2 1.5 1.5 1.5 2 2.5 3 3.5
1.14 1.34 1.64 1.64 1.64 2.14 2.64 3.14 3.68
5.5 7 8 9 10 12 14 18 22
5.2 6.64 7.64 8.64 9.64 11.57 13.57 17.57 21.48
2 2.2 2.5 3 3.5 4.2 5 6.5 8
1.75 1.95 2.25 2.75 3.2 3.9 4.7 6.14 7.64
1 1.3 1.3 1.8 1.8 2.3 2.8 3.3 3.8
1.4 1.7 1.7 2.2 2.2 2.7 3.2 3.8 4.3
0.31 0.55 0.79 1.21 1.78 2.96 4.7 9.95 18.7

Alternative history

DIN 548 - 1986 DIN 548 - 2007 DIN 548 - 2024
Send Inquiry

Similar Standards

1 Rolling Bearings - Accessories - Locknuts with 8 Slots [ISO]
ISO 2982-2 (8Slot) - 2013 		Rolling Bearings - Accessories - Locknuts with 8 Slots
2 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2024 		Round Nuts with Set Pin Holes in Side
3 Shaft Collar Axle Flande Mounting Shaft Collar [DIN]
DIN 703 - 1955 		Shaft Collar Axle Flande Mounting Shaft Collar
4 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
5 Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread [DIN]
DIN 1816 - 1971 		Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
6 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2007 		Round Nuts with Set Pin Holes in Side
7 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
8 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
9 Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406
10 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
11 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
12 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2006 		Round Nuts with Drilled Holes in One Face
13 Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts [DIN]
DIN 82013 - 2010 		Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts
14 Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406
15 Rolling Bearings - Accessories - Locknut with 4 Slots [ISO]
ISO 2982-2 (4 Slot) - 2013 		Rolling Bearings - Accessories - Locknut with 4 Slots
16 Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread
17 Slotted Round Nuts [DIN]
DIN 546 - 2024 		Slotted Round Nuts
18 Removal Nut Dimensions Inch Design Series RN and ARN [ANSI]
ANSI /ABMA 8.2 - 1999 		Removal Nut Dimensions Inch Design Series RN and ARN
19 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
20 Slotted Round Nuts [DIN]
DIN 546 - 1986 		Slotted Round Nuts
21 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2024 		Round Nuts with Drilled Holes in One Face
22 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 1986 		Round Nuts with Drilled Holes in One Face
23 Rolling Bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling Bearings - Locknuts
24 Round Nuts with Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts with Set Pin Holes In Side
25 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2017 		Rolling Bearing - Locking Clips - MSL Series
26 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
27 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
28 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
29 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
30 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
31 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
32 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2006 		Rolling Bearing - Locking Clips - MSL Series
33 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
34 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
35 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
36 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
37 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
38 Spectacle Frames - Recessed Round Nuts [JIS]
JIS B 1119 (3SR) - 1986 		Spectacle Frames - Recessed Round Nuts
39 Locknuts with 4 Slots [JIS]
JIS B 1554 (AN,HN/ANL,HNL) - 2016 		Locknuts with 4 Slots
40 Round Nuts with Drilled Holes in One Face [GB]
GB 815 - 1988 		Round Nuts with Drilled Holes in One Face
41 Locknuts with 8 Slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 Slots
42 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
43 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
44 Small Round Nuts [GB]
GB 810 - 1988 		Small Round Nuts
45 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2017 		Rolling Bearing - Locking Clips - MS Series
46 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
47 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2006 		Rolling Bearing - Locking Clips - MS Series
48 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
49 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2006 		Rolling Bearing Accessories - Locknuts - KML Series
50 Round Nuts Slotted on Face [GOST]
GOST 10657 - 1980 		Round Nuts Slotted on Face
51 Slotted Round Nuts, Product Grade A [GOST]
GOST 11871 - 1988 		Slotted Round Nuts, Product Grade A
52 Round Nuts with Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts with Set Pin Holes In Side
53 Round Nuts with Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts with Drilled Holes In One Face
54 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts