About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Round Nuts with Drilled Holes in One Face

GB 815 - 1988

Display drawing:

国标GB 815 - 1988 GB815 815GB Round Nuts with Drilled Holes in One Face
国标GB 815 - 1988 GB815 815GB Round Nuts with Drilled Holes in One Face
Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs
Default density g/cm3
×

Choose materials based on density.(g/cm3)

  • Carbon Steel 7.85
  • Stainless Steel 8.1
  • Stainless Steel 7.95
  • Stainless Steel 7.7
  • Titanium Alloy 4.5
  • Aluminum Alloy 2.8
  • Copper 8.89


Select here or enter material density on the calculation page.
Thread Size
D
M2 M2.5 M3 M4 M5 M6 M8 M10
P Pitch
dk max
min
m max
min
d1
t
B
k
c
d2
P2 Pitch
per 1000 units ≈ kg
0.4 0.45 0.5 0.7 0.8 1 1.25 1.5
5.5 7 8 10 12 14 18 22
5.32 6.78 7.78 9.78 11.73 13.73 17.73 21.67
2 2.2 2.5 3.5 4.2 5 6.5 8
1.75 1.95 2.25 3.2 3.9 4.7 6.14 7.64
1 1.2 1.5 1.5 2 2.5 3 3.5
2 2.2 1.5 2 2.5 3 3.5 4
4 5 5.5 7 8 10 13 15
1 1.1 1.3 1.8 2.1 2.5 3.3 4
0.2 0.2 0.3 0.4 0.4 0.5 0.5 0.8
M1.2 M1.4 M1.4 M2 M2 M2.5 M3 M3
0.25 0.3 0.3 0.4 0.4 0.45 0.5 0.5
0.24 0.44 0.67 1.51 2.57 4.16 9.03 16.7

Alternative history

GB /T 815 - 1988
Send Inquiry

Similar Standards

1 Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406
2 Rolling Bearings - Accessories - Locknuts with 8 Slots [ISO]
ISO 2982-2 (8Slot) - 2013 		Rolling Bearings - Accessories - Locknuts with 8 Slots
3 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
4 Removal Nut Dimensions Inch Design Series RN and ARN [ANSI]
ANSI /ABMA 8.2 - 1999 		Removal Nut Dimensions Inch Design Series RN and ARN
5 Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts [DIN]
DIN 82013 - 2010 		Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts
6 Slotted Round Nuts [DIN]
DIN 546 - 1986 		Slotted Round Nuts
7 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2024 		Round Nuts with Drilled Holes in One Face
8 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 1986 		Round Nuts with Drilled Holes in One Face
9 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
10 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
11 Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread
12 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2024 		Round Nuts with Set Pin Holes in Side
13 Slotted Round Nuts [DIN]
DIN 546 - 2024 		Slotted Round Nuts
14 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 1986 		Round Nuts with Set Pin Holes in Side
15 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
16 Rolling Bearings - Accessories - Locknut with 4 Slots [ISO]
ISO 2982-2 (4 Slot) - 2013 		Rolling Bearings - Accessories - Locknut with 4 Slots
17 Rolling Bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling Bearings - Locknuts
18 Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406
19 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
20 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
21 Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread [DIN]
DIN 1816 - 1971 		Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
22 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2006 		Round Nuts with Drilled Holes in One Face
23 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2007 		Round Nuts with Set Pin Holes in Side
24 Shaft Collar Axle Flande Mounting Shaft Collar [DIN]
DIN 703 - 1955 		Shaft Collar Axle Flande Mounting Shaft Collar
25 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
26 Locknuts with 8 Slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 Slots
27 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
28 Spectacle Frames - Recessed Round Nuts [JIS]
JIS B 1119 (3SR) - 1986 		Spectacle Frames - Recessed Round Nuts
29 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
30 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
31 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2006 		Rolling Bearing - Locking Clips - MS Series
32 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
33 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
34 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
35 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
36 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
37 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2017 		Rolling Bearing - Locking Clips - MS Series
38 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2017 		Rolling Bearing - Locking Clips - MSL Series
39 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
40 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
41 Small Round Nuts [GB]
GB 810 - 1988 		Small Round Nuts
42 Round Nuts with Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts with Set Pin Holes In Side
43 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
44 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
45 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
46 Locknuts with 4 Slots [JIS]
JIS B 1554 (AN,HN/ANL,HNL) - 2016 		Locknuts with 4 Slots
47 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
48 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2006 		Rolling Bearing Accessories - Locknuts - KML Series
49 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2006 		Rolling Bearing - Locking Clips - MSL Series
50 Slotted Round Nuts, Product Grade A [GOST]
GOST 11871 - 1988 		Slotted Round Nuts, Product Grade A
51 Round Nuts Slotted on Face [GOST]
GOST 10657 - 1980 		Round Nuts Slotted on Face
52 Round Nuts with Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts with Set Pin Holes In Side
53 Round Nuts with Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts with Drilled Holes In One Face
54 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts