About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

(Non-preferred) dimensions in parentheses.

Unit:mm

Spectacle Frames - Recessed Round Nuts

JIS B 1119 (3SR) - 1986

Display drawing:

日标JIS B1119 (3SR) - 1986 JIS1119 1119JIS Spectacle Frames - Recessed Round Nuts
Thread Size
d
M1.4 M1.6 (M1.7)
P Pitch
dk max
min
m Nominal Size
max
min
m1 ≈
n max
min
t Nominal Size
max
min
0.3 0.35 0.35
2.8 2.8 2.8
2.66 2.66 2.66
1 1 1
1.1 1.1 1.1
0.9 0.9 0.9
0.2 0.2 0.2
0.48 0.48 0.48
0.4 0.4 0.4
0.55 0.55 0.55
0.6 0.6 0.6
0.5 0.5 0.5
Send Inquiry

Similar Standards

1 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
2 Removal Nut Dimensions Inch Design Series RN and ARN [ANSI]
ANSI /ABMA 8.2 - 1999 		Removal Nut Dimensions Inch Design Series RN and ARN
3 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
4 Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread
5 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 1986 		Round Nuts with Set Pin Holes in Side
6 Slotted Round Nuts [DIN]
DIN 546 - 1986 		Slotted Round Nuts
7 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
8 Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406
9 Rolling Bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling Bearings - Locknuts
10 Rolling Bearings - Accessories - Locknuts with 8 Slots [ISO]
ISO 2982-2 (8Slot) - 2013 		Rolling Bearings - Accessories - Locknuts with 8 Slots
11 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2007 		Round Nuts with Set Pin Holes in Side
12 Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts [DIN]
DIN 82013 - 2010 		Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts
13 Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread [DIN]
DIN 1816 - 1971 		Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
14 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2024 		Round Nuts with Drilled Holes in One Face
15 Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406
16 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2006 		Round Nuts with Drilled Holes in One Face
17 Slotted Round Nuts [DIN]
DIN 546 - 2024 		Slotted Round Nuts
18 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 1986 		Round Nuts with Drilled Holes in One Face
19 Rolling Bearings - Accessories - Locknut with 4 Slots [ISO]
ISO 2982-2 (4 Slot) - 2013 		Rolling Bearings - Accessories - Locknut with 4 Slots
20 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
21 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
22 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
23 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2024 		Round Nuts with Set Pin Holes in Side
24 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
25 Locknuts with 8 Slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 Slots
26 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
27 Round Nuts with Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts with Set Pin Holes In Side
28 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2006 		Rolling Bearing Accessories - Locknuts - KML Series
29 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
30 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
31 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
32 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
33 Small Round Nuts [GB]
GB 810 - 1988 		Small Round Nuts
34 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
35 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
36 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
37 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
38 Locknuts with 4 Slots [JIS]
JIS B 1554 (AN HN/ANL HNL) - 2016 		Locknuts with 4 Slots
39 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
40 Round Nuts with Drilled Holes in One Face [GB]
GB 815 - 1988 		Round Nuts with Drilled Holes in One Face
41 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
42 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
43 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
44 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
45 Round Nuts Slotted on Face [GOST]
GOST 10657 - 1980 		Round Nuts Slotted on Face
46 Slotted Round Nuts, Product Grade A [GOST]
GOST 11871 - 1988 		Slotted Round Nuts, Product Grade A
47 Round Nuts with Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts with Set Pin Holes In Side
48 Round Nuts with Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts with Drilled Holes In One Face
49 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts