About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:inch

Removal Nut Dimensions Inch Design Series RN and ARN

ANSI /ABMA 8.2 - 1999

Display drawing:

美标ANSI /ABMA8.2 - 1999 ANSI8.2 8.2ANSI Removal Nut Dimensions Inch Design Series RN and ARN
Nominal Diameter
d
2.204 2.407 2.626 4.778 5.185 5.622 6.097 6.503 6.925 7.331 7.753 8.191 11.973 12.942 13.723
Code
k1
C max (inch)
E max (inch)
D max (inch)
G min (inch)
H max (inch)
D1 max (inch)
C max (mm)
E max (mm)
D max (mm)
G max (mm)
H max (mm)
D1 min (mm)
RN 10 RN 11 RN 12 ANR 22 ANR 24 ANR 26 RN 28 RN 30 RN 32 RN 34 RN 36 RN 38 RN 56 RN 60 RN 64
18 18 18 12 12 12 8 8 8 8 8 8 6 6 6
3.062 3.281 3.500 6.312 3.938 7.312 7.938 8.312 8.938 9.312 9.875 10.688 15.188 16.812 17.812
2.562 2.812 3.062 5.375 5.625 6.062 6.563 7.062 7.562 8.062 8.563 9.125 13.562 14.531 14.250
0.594 0.594 0.656 0.781 0.844 0.906 0.969 1.031 1.031 1.094 1.094 1.156 1.468 1.666 1.674
0.240 0.240 0.240 0.610 0.610 0.610 0.610 0.735 0.735 0.860 0.860 0.860 1.230 1.230 1.230
0.135 0.135 0.135 0.260 0.291 0.291 0.291 0.323 0.323 0.385 0.385 0.385 0.510 0.510 0.510
0.078 0.078 0.078 0.141 0.141 0.141 0.141 0.141 0.141 0.141 0.141 0.141 0.203 0.203 0.203
77.77 83.34 88.90 160.32 176.23 185.72 201.63 211.12 227.03 236.52 250.83 271.48 385.78 427.02 452.42
65.07 71.42 77.77 136.53 142.88 153.97 166.70 179.37 192.07 204.77 217.50 231.78 344.47 369.09 361.95
15.09 15.09 16.66 19.84 21.44 23.01 24.61 26.19 26.19 27.79 27.79 29.36 37.29 42.32 42.32
6.10 6.10 6.10 15.49 15.49 15.49 15.49 18.67 18.67 21.84 21.84 21.84 31.24 31.24 31.24
3.43 3.43 3.43 6.60 7.39 7.39 7.39 8.20 8.20 9.78 9.78 9.78 12.95 12.95 12.95
1.98 1.98 1.98 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 5.16 5.16 5.16
Send Inquiry

Similar Standards

1 Slotted Round Nuts [DIN]
DIN 546 - 2024 		Slotted Round Nuts
2 Rolling Bearings - Accessories - Locknuts with 8 Slots [ISO]
ISO 2982-2 (8Slot) - 2013 		Rolling Bearings - Accessories - Locknuts with 8 Slots
3 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2007 		Round Nuts with Set Pin Holes in Side
4 Shaft Collar Axle Flande Mounting Shaft Collar [DIN]
DIN 703 - 1955 		Shaft Collar Axle Flande Mounting Shaft Collar
5 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
6 Slotted Round Nuts [DIN]
DIN 546 - 1986 		Slotted Round Nuts
7 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
8 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 1986 		Round Nuts with Set Pin Holes in Side
9 Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406
10 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 1986 		Round Nuts with Drilled Holes in One Face
11 Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread [DIN]
DIN 1816 - 1971 		Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
12 Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
13 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2024 		Round Nuts with Drilled Holes in One Face
14 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
15 Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406
16 Round Nuts with Drilled Holes in One Face [DIN]
DIN 547 - 2006 		Round Nuts with Drilled Holes in One Face
17 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
18 Rolling Bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling Bearings - Locknuts
19 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
20 Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts [DIN]
DIN 82013 - 2010 		Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts
21 Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread
22 Round Nuts with Set Pin Holes in Side [DIN]
DIN 548 - 2024 		Round Nuts with Set Pin Holes in Side
23 Rolling Bearings - Accessories - Locknut with 4 Slots [ISO]
ISO 2982-2 (4 Slot) - 2013 		Rolling Bearings - Accessories - Locknut with 4 Slots
24 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2006 		Rolling Bearing - Locking Clips - MSL Series
25 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
26 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
27 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2017 		Rolling Bearing - Locking Clips - MSL Series
28 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
29 Round Nuts with Drilled Holes in One Face [GB]
GB 815 - 1988 		Round Nuts with Drilled Holes in One Face
30 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
31 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
32 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2006 		Rolling Bearing - Locking Clips - MS Series
33 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2006 		Rolling Bearing Accessories - Locknuts - KML Series
34 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
35 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
36 Locknuts with 8 Slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 Slots
37 Locknuts with 4 Slots [JIS]
JIS B 1554 (AN,HN/ANL,HNL) - 2016 		Locknuts with 4 Slots
38 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
39 Small Round Nuts [GB]
GB 810 - 1988 		Small Round Nuts
40 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2017 		Rolling Bearing - Locking Clips - MS Series
41 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
42 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
43 Spectacle Frames - Recessed Round Nuts [JIS]
JIS B 1119 (3SR) - 1986 		Spectacle Frames - Recessed Round Nuts
44 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
45 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
46 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
47 Round Nuts with Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts with Set Pin Holes In Side
48 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
49 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
50 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts
51 Round Nuts with Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts with Drilled Holes In One Face
52 Round Nuts with Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts with Set Pin Holes In Side
53 Round Nuts Slotted on Face [GOST]
GOST 10657 - 1980 		Round Nuts Slotted on Face
54 Slotted Round Nuts, Product Grade A [GOST]
GOST 11871 - 1988 		Slotted Round Nuts, Product Grade A