ANSI /ABMA 8.2 - 1999 Removal Nut Dimensions Inch Design Series RN and ARN

Unit:

美标ANSI /ABMA8.2 - 1999 ANSI8.2 8.2ANSI Removal Nut Dimensions Inch Design Series RN and ARN

Nominal Diameter
d

2.204

2.407

2.626

4.778

5.185

5.622

6.097

6.503

6.925

7.331

7.753

8.191

11.973

12.942

13.723

Code
k₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
D₁	max (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	max (mm)
H	max (mm)
D₁	min (mm)

RN 10	RN 11	RN 12	ANR 22	ANR 24	ANR 26	RN 28	RN 30	RN 32	RN 34	RN 36	RN 38	RN 56	RN 60	RN 64
18	18	18	12	12	12	8	8	8	8	8	8	6	6	6
3.062	3.281	3.500	6.312	3.938	7.312	7.938	8.312	8.938	9.312	9.875	10.688	15.188	16.812	17.812
2.562	2.812	3.062	5.375	5.625	6.062	6.563	7.062	7.562	8.062	8.563	9.125	13.562	14.531	14.250
0.594	0.594	0.656	0.781	0.844	0.906	0.969	1.031	1.031	1.094	1.094	1.156	1.468	1.666	1.674
0.240	0.240	0.240	0.610	0.610	0.610	0.610	0.735	0.735	0.860	0.860	0.860	1.230	1.230	1.230
0.135	0.135	0.135	0.260	0.291	0.291	0.291	0.323	0.323	0.385	0.385	0.385	0.510	0.510	0.510
0.078	0.078	0.078	0.141	0.141	0.141	0.141	0.141	0.141	0.141	0.141	0.141	0.203	0.203	0.203
77.77	83.34	88.90	160.32	176.23	185.72	201.63	211.12	227.03	236.52	250.83	271.48	385.78	427.02	452.42
65.07	71.42	77.77	136.53	142.88	153.97	166.70	179.37	192.07	204.77	217.50	231.78	344.47	369.09	361.95
15.09	15.09	16.66	19.84	21.44	23.01	24.61	26.19	26.19	27.79	27.79	29.36	37.29	42.32	42.32
6.10	6.10	6.10	15.49	15.49	15.49	15.49	18.67	18.67	21.84	21.84	21.84	31.24	31.24	31.24
3.43	3.43	3.43	6.60	7.39	7.39	7.39	8.20	8.20	9.78	9.78	9.78	12.95	12.95	12.95
1.98	1.98	1.98	3.58	3.58	3.58	3.58	3.58	3.58	3.58	3.58	3.58	5.16	5.16	5.16

Send Inquiry

Similar Standards

1	[GB] GB 810 - 1988	Small Round Nuts
2	[GB] GB 812 - 1988	Round Nuts
3	[GB] GB /T 9160.2 (KM) - 2017	Rolling Bearing Accessories - Locknuts - KM Series
4	[GB] GB /T 9160.2 (KML) - 2017	Rolling Bearing Accessories - Locknuts - KML Series
5	[GB] GB /T 9160.2 (HM) - 2017	Rolling Bearing Accessories - Locknuts - HM Series
6	[GB] GB /T 9160.2 (HML) - 2017	Rolling Bearing Accessories - Locknuts - HML Series
7	[GB] GB /T 9160.2 (MS) - 2017	Rolling Bearing - Locking Clips - MS Series
8	[GB] GB /T 9160.2 (MSL) - 2017	Rolling Bearing - Locking Clips - MSL Series
9	[GB] GB /T 9160.2 (KM) - 2006	Rolling Bearing Accessories - Locknuts - KM Series
10	[GB] GB /T 9160.2 (KML) - 2006	Rolling Bearing Accessories - Locknuts - KML Series
11	[GB] GB /T 9160.2 (HM) - 2006	en:Rolling Bearing Accessories - Locknuts - HM Series
12	[GB] GB /T 9160.2 (HML) - 2006	Rolling Bearing Accessories - Locknuts - HML Series
13	[GB] GB /T 9160.2 (MS) - 2006	Rolling Bearing - Locking Clips - MS Series
14	[GB] GB /T 9160.2 (MSL) - 2006	Rolling Bearing - Locking Clips - MSL Series
15	[GB] GB 815 - 1988	Round Nuts With Drilled Holes In One Face
16	[GB] GB 816 - 1988	Round Nuts With Set Pin Holes In Side
17	[GB] GB 817 - 1988	Slotted Round Nuts
18	[GB] GB 9160.3 (KM) - 1988	Rolling Bearing Accessories - Locknuts - KM Series
19	[GB] GB 9160.3 (KML) - 1988	Rolling Bearing Accessories - Locknuts - KML Series
20	[GB] GB 9160.3 (HM) - 1988	Rolling Bearing Accessories - Locknuts - HM Series
21	[GB] GB 9160.3 (HML) - 1988	Rolling Bearing Accessories - Locknuts - HML Series
22	[DIN] DIN 981 (HM) - 2009	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
23	[DIN] DIN 981 (KM) - 2009	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
24	[DIN] DIN 981 (HM) - 1993	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
25	[DIN] DIN 981 (KM) - 1993	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
26	[DIN] DIN 981 (KM) - 1983	Rolling bearings - Locknuts
27	[DIN] DIN 546 - 2010	Slotted Round Nuts
28	[DIN] DIN 82013 - 2010	Cargo lifting gear - Accessories and fittings for lifting - Round nuts
29	[DIN] DIN 548 - 2007	Round nuts with set pin holes in side
30	[DIN] DIN 547 - 2006	Round Nuts With Drilled Holes In One Face
31	[DIN] DIN 70852 - 1989	Groove Nuts
32	[DIN] DIN 546 - 1986	Slotted round nuts
33	[DIN] DIN 547 - 1986	Round nuts with drilled holes in one face
34	[DIN] DIN 548 - 1986	Round nuts with set pin holes in side
35	[DIN] DIN 1804 - 1971	Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
36	[DIN] DIN 1816 - 1971	Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
37	[DIN] DIN 703 - 1955	Shaft collar axle flande mounting shaft collar
38	[ISO] ISO 2982-2 - 2013	Locknut With 4 Slots
39	[ISO] ISO 2982-2 - 2013	Locknuts With 8 Slots
40	[JIS] JIS B 1554 (AN,HN/ANL,HNL) - 2016	Locknuts with 4 slots
41	[JIS] JIS B 1554 (AN/ANL) - 2016	Locknuts with 8 slots
42	[NF] NF E 22-111 - 1969	Locknuts - Heavy Series
43	[NF] NF E 27-413 - 1959	Slotted Round Nuts
44	[CNS] CNS 4433 - 1993	Round Nuts With Set Pin Holes In Side
45	[CNS] CNS 4434 - 1993	Round Nuts With Drilled Holes In One Face
46	[CNS] CNS 4465 - 1978	Round Nuts
47	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
48	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-000