ANSI /ABMA 8.2 - 1999 Locknut Dimensions Inch Design Series N-000

Unit:

美标ANSI /ABMA8.2 - 1999 ANSI8.2 8.2ANSI Locknut Dimensions Inch Design Series N-000

Nominal Diameter
d

4.325

4.716

5.106

5.497

5.888

6.284

6.659

7.066

7.472

7.847

8.628

9.442

Code
k₁
M₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
U	min (inch)
L₁	min (inch)
Y	min (inch)
T₁
s₁	min (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	min (mm)
H	max (mm)
U	min (mm)
L₁	min (mm)
Y	min (mm)
s₁	min (mm)

N-022	N-024	N-026	N-028	N-030	N-032	N-034	N-036	N-038	N-040	N-044	N-048
12	12	12	12	12	8	8	8	8	8	8	6
/	/	/	/	/	/	/	/	/	/	/	/
5.318	5.693	6.130	6.505	7.130	7.505	7.880	8.255	8.693	9.443	10.255	11.443
4.901	5.313	5.703	6.109	6.688	7.094	7.484	7.875	8.266	8.750	9.531	10.625
0.791	0.823	0.885	0.948	0.979	1.041	1.073	1.104	1.135	1.198	1.260	1.354
0.485	0.485	0.485	0.485	0.610	0.610	0.610	0.610	0.610	0.735	0.860	0.860
0.198	0.198	0.198	0.198	0.229	0.229	0.229	0.229	0.229	0.323	0.385	0.385
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	10.423
/	/	/	/	/	/	/	/	/	/	/	5/16-18
/	/	/	/	/	/	/	/	/	/	/	0.625
135.08	144.60	155.70	165.23	181.10	190.63	200.15	209.68	220.80	239.85	260.48	290.65
124.49	134.95	144.86	155.17	169.88	180.19	190.09	200.03	209.96	222.25	242.09	269.88
20.09	20.90	22.48	24.08	24.87	26.44	27.25	28.04	28.83	30.43	32.00	34.39
12.32	12.32	12.32	12.32	15.49	15.49	15.49	15.49	15.49	18.67	21.84	21.84
5.03	5.03	5.03	5.03	5.82	5.82	5.82	5.82	5.82	8.20	9.78	9.78
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	/
/	/	/	/	/	/	/	/	/	/	/	264.74
/	/	/	/	/	/	/	/	/	/	/	15.88

Nominal Diameter
d

10.192

11.004

11.785

12.562

13.339

14.170

14.957

15.745

16.532

17.319

18.107

18.894

Code
k₁
M₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
U	min (inch)
L₁	min (inch)
Y	min (inch)
T₁
s₁	min (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	min (mm)
H	max (mm)
U	min (mm)
L₁	min (mm)
Y	min (mm)
s₁	min (mm)

N-052	N-056	N-060	N-064	N-068	N-072	N-076	N-080	N-084	N-088	N-092	N-096
6	6	6	6	/	/	/	/	/	/	/	/
/	/	/	/	5	5	5	5	5	5	5	5
12.193	13.005	14.193	15.005	15.755	16.505	17.755	18.505	19.318	20.505	21.255	22.068
11.406	12.219	13.219	14.031	14.813	15.500	16.625	17.438	18.188	19.250	20.688	20.750
1.416	1.510	1.573	1.666	1.791	1.791	1.916	2.073	2.073	2.385	2.385	2.385
0.860	0.980	0.980	0.980	0.980	1.230	1.230	1.230	1.355	1.355	1.355	1.480
0.385	0.385	0.510	0.510	0.510	0.510	0.604	0.604	0.604	0.604	0.604	0.604
/	/	/	/	13.355	14.186	14.973	15.761	16.548	17.335	18.123	18.910
/	/	/	/	0.375	0.375	0.375	0.375	0.375	0.375	0.375	0.375
11.298	12.110	13.110	13.860	14.735	15.485	16.485	17.235	18.110	19.110	19.985	20.673
5/16-18	5/16-18	3/8-16	3/8-16	3/8-16	3/8-16	1/2-13	1/2-13	1/2-13	5/8-11	5/8-11	5/8-11
0.625	0.625	0.750	0.750	0.750	0.750	0.875	0.875	0.875	1.250	1.250	1.250
309.70	330.33	360.50	381.13	400.18	419.23	450.98	470.03	490.68	520.83	539.88	560.53
289.71	310.36	335.76	356.39	376.25	393.70	422.28	442.93	461.98	488.95	525.48	527.05
35.97	38.35	39.95	42.32	45.49	45.49	48.67	52.65	52.65	60.58	60.58	60.58
21.84	24.89	24.89	24.89	24.89	31.24	31.24	31.24	34.42	34.42	34.42	37.59
9.78	9.78	12.95	12.95	12.95	12.95	15.34	15.34	15.34	15.34	15.34	15.34
/	/	/	/	339.22	360.32	380.31	400.33	420.32	440.31	460.32	480.31
/	/	/	/	9.53	9.53	9.53	9.53	9.53	9.53	9.53	9.53
286.97	307.59	332.99	352.04	374.27	393.32	418.72	437.77	459.99	485.39	507.62	525.09
15.88	15.88	19.05	19.05	19.05	19.05	22.23	22.23	22.23	31.75	31.75	31.75

Nominal Diameter
d

19.682

20.867

22.048

23.623

24.804

26.379

27.961

29.536

31.504

33.473

35.441

37.410

Code
k₁
M₁
C	max (inch)
E	max (inch)
D	max (inch)
G	min (inch)
H	max (inch)
U	min (inch)
L₁	min (inch)
Y	min (inch)
T₁
s₁	min (inch)
C	max (mm)
E	max (mm)
D	max (mm)
G	min (mm)
H	max (mm)
U	min (mm)
L₁	min (mm)
Y	min (mm)
s₁	min (mm)

N-500	N-530	N-560	N-600	N-630	N-670	N-710	N-750	N-800	N-850	N-900	N-950
/	/	/	/	/	/	/	/	/	/	/	/
5	4	4	4	4	4	3	3	3	3	3	3
22.818	24.818	25.568	27.568	28.755	30.693	32.693	34.255	36.255	38.568	40.568	43.005
21.688	23.250	24.000	26.000	27.125	29.125	30.688	32.313	34.250	36.375	36.375	40.500
2.703	2.703	2.953	2.953	2.953	3.140	3.578	3.578	3.578	3.578	3.953	3.953
1.480	1.605	1.605	1.605	1.855	1.855	1.980	2.230	2.230	2.480	2.480	2.480
0.604	0.823	0.823	0.823	0.823	0.823	1.010	1.010	1.010	1.010	1.010	1.010
19.698	20.887	22.068	23.643	24.824	26.399	27.988	29.563	31.531	33.500	35.468	37.437
0.375	0.500	0.500	0.500	0.500	0.500	0.688	0.688	0.688	0.688	0.688	0.688
21.610	23.360	24.110	25.923	27.235	28.985	30.610	32.235	34.610	36.485	38.610	40.610
5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	5/8-11	3/4-10	3/4-10	3/4-10
1.250	1.250	1.250	1.250	1.250	1.250	1.250	1.250	1.250	1.500	1.500	1.500
579.58	630.38	649.43	700.23	730.38	779.60	830.40	870.08	920.88	979.63	1030.43	1092.33
550.88	590.55	609.60	660.40	688.98	739.78	779.48	820.75	869.95	923.93	974.73	1028.70
68.66	68.66	75.01	75.01	75.01	79.76	90.88	90.88	90.88	90.88	100.41	100.41
37.59	40.77	40.77	40.77	47.12	47.12	50.29	56.64	56.64	62.99	62.99	62.99
15.34	20.90	20.90	20.90	20.90	20.90	25.65	25.65	25.65	25.65	25.65	25.65
500.33	530.53	560.53	600.53	630.53	670.53	710.90	750.90	800.89	850.90	900.89	950.90
9.53	12.70	12.70	12.70	12.70	12.70	17.48	17.48	17.48	17.48	17.48	17.48
548.89	593.34	612.39	658.44	691.77	736.22	777.49	818.77	879.09	926.72	980.69	1031.49
31.75	31.75	31.75	31.75	31.75	31.75	31.75	31.75	31.75	38.10	38.10	38.10

Send Inquiry

Similar Standards

1	[GB] GB 810 - 1988	Small Round Nuts
2	[GB] GB 812 - 1988	Round Nuts
3	[GB] GB /T 9160.2 (KM) - 2017	Rolling Bearing Accessories - Locknuts - KM Series
4	[GB] GB /T 9160.2 (KML) - 2017	Rolling Bearing Accessories - Locknuts - KML Series
5	[GB] GB /T 9160.2 (HM) - 2017	Rolling Bearing Accessories - Locknuts - HM Series
6	[GB] GB /T 9160.2 (HML) - 2017	Rolling Bearing Accessories - Locknuts - HML Series
7	[GB] GB /T 9160.2 (MS) - 2017	Rolling Bearing - Locking Clips - MS Series
8	[GB] GB /T 9160.2 (MSL) - 2017	Rolling Bearing - Locking Clips - MSL Series
9	[GB] GB /T 9160.2 (KM) - 2006	Rolling Bearing Accessories - Locknuts - KM Series
10	[GB] GB /T 9160.2 (KML) - 2006	Rolling Bearing Accessories - Locknuts - KML Series
11	[GB] GB /T 9160.2 (HM) - 2006	en:Rolling Bearing Accessories - Locknuts - HM Series
12	[GB] GB /T 9160.2 (HML) - 2006	Rolling Bearing Accessories - Locknuts - HML Series
13	[GB] GB /T 9160.2 (MS) - 2006	Rolling Bearing - Locking Clips - MS Series
14	[GB] GB /T 9160.2 (MSL) - 2006	Rolling Bearing - Locking Clips - MSL Series
15	[GB] GB 815 - 1988	Round Nuts With Drilled Holes In One Face
16	[GB] GB 816 - 1988	Round Nuts With Set Pin Holes In Side
17	[GB] GB 817 - 1988	Slotted Round Nuts
18	[GB] GB 9160.3 (KM) - 1988	Rolling Bearing Accessories - Locknuts - KM Series
19	[GB] GB 9160.3 (KML) - 1988	Rolling Bearing Accessories - Locknuts - KML Series
20	[GB] GB 9160.3 (HM) - 1988	Rolling Bearing Accessories - Locknuts - HM Series
21	[GB] GB 9160.3 (HML) - 1988	Rolling Bearing Accessories - Locknuts - HML Series
22	[DIN] DIN 981 (HM) - 2009	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
23	[DIN] DIN 981 (KM) - 2009	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
24	[DIN] DIN 981 (HM) - 1993	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
25	[DIN] DIN 981 (KM) - 1993	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
26	[DIN] DIN 981 (KM) - 1983	Rolling bearings - Locknuts
27	[DIN] DIN 546 - 2010	Slotted Round Nuts
28	[DIN] DIN 82013 - 2010	Cargo lifting gear - Accessories and fittings for lifting - Round nuts
29	[DIN] DIN 548 - 2007	Round nuts with set pin holes in side
30	[DIN] DIN 547 - 2006	Round Nuts With Drilled Holes In One Face
31	[DIN] DIN 70852 - 1989	Groove Nuts
32	[DIN] DIN 546 - 1986	Slotted round nuts
33	[DIN] DIN 547 - 1986	Round nuts with drilled holes in one face
34	[DIN] DIN 548 - 1986	Round nuts with set pin holes in side
35	[DIN] DIN 1804 - 1971	Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
36	[DIN] DIN 1816 - 1971	Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
37	[DIN] DIN 703 - 1955	Shaft collar axle flande mounting shaft collar
38	[ISO] ISO 2982-2 - 2013	Locknut With 4 Slots
39	[ISO] ISO 2982-2 - 2013	Locknuts With 8 Slots
40	[JIS] JIS B 1554 (AN,HN/ANL,HNL) - 2016	Locknuts with 4 slots
41	[JIS] JIS B 1554 (AN/ANL) - 2016	Locknuts with 8 slots
42	[NF] NF E 22-111 - 1969	Locknuts - Heavy Series
43	[NF] NF E 27-413 - 1959	Slotted Round Nuts
44	[CNS] CNS 4433 - 1993	Round Nuts With Set Pin Holes In Side
45	[CNS] CNS 4434 - 1993	Round Nuts With Drilled Holes In One Face
46	[CNS] CNS 4465 - 1978	Round Nuts
47	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
48	[ANSI] ANSI /ABMA 8.2 - 1999	Removal Nut Dimensions Inch Design Series RN and ARN