Click Specification

Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN

ANSI /ABMA 8.2 - 1999

Display drawing:

Nominal Diameter
d

0.391

0.469

0.586

0.664

0.781

0.969

1.173

1.312

1.376

1.563

1.167

1.967

Code

C	max（inch）
E	max（inch）
D	max（inch）	N-00
D		TN-00
G	min（inch）
H	max（inch）
C	max（mm）
E	max（mm）
D	max（mm）	N-00
D		TN-00
G	min（mm）
H	max（mm）

N-00	N-01	N-02	N-03	N-04	N-05	N-06	/	N-07	N-08	N-09	N-10
/	/	/	/	/	/	/	TN-065	TN-07	TN-08	TN-09	TN-10
0.755	0.880	1.005	1.130	1.380	1.568	1.755	2.068	2.068	2.255	2.536	2.693
0.625	0.719	0.813	0.938	1.125	1.281	1.500	1.813	1.813	2.000	2.281	2.438
0.229	0.323	0.323	0.354	0.385	0.416	0.416	/	0.448	0.448	0.448	0.510
/	/	/	/	/	/	/	0.448	0.448	0.448	0.448	0.510
0.120	0.120	0.120	0.120	0.178	0.178	0.178	0.178	0.178	0.240	0.240	0.240
0.073	0.073	0.104	0.104	0.104	0.104	0.104	0.104	0.104	0.104	0.104	0.104
19.18	22.35	25.53	28.70	35.05	39.83	44.58	52.53	52.53	57.28	64.41	68.40
15.88	18.26	20.65	23.82	28.58	32.54	38.10	46.05	46.05	50.80	57.94	61.92
5.82	8.20	8.20	8.99	9.78	10.57	10.57	/	11.38	11.38	11.38	12.95
/	/	/	/	/	/	/	11.38	11.38	11.38	11.38	12.95
3.05	3.05	3.05	3.05	4.52	4.52	4.52	4.52	4.52	6.10	6.10	6.10
1.85	1.85	2.64	2.64	2.64	2.64	2.64	2.64	2.64	2.64	2.64	2.64

Nominal Diameter
d

2.157

2.360

2.548

2.751

2.933

3.137

3.340

3.527

3.730

3.918

4.122

4.325

Code

C	max（inch）
E	max（inch）
D	max（inch）	N-00
D		TN-00
G	min（inch）
H	max（inch）
C	max（mm）
E	max（mm）
D	max（mm）	N-00
D		TN-00
G	min（mm）
H	max（mm）

N-11	N-12	N-13	N-14	AN-15	AN-16	AN-17	AN-18	AN-19	AN-20	AN-21	AN-22
TN-11	TN-12	TN-13	TN-14	TAN-15	TAN-16	TAN-17	TAN-18	TAN-19	TAN-20	TAN-21	TAN-22
2.974	3.161	3.380	3.630	3.880	4.161	4.411	4.661	4.943	5.193	5.443	5.724
2.656	2.844	3.063	3.313	3.563	3.844	4.031	4.281	4.563	4.813	5.000	5.281
0.510	0.541	0.573	0.573	0.604	0.604	0.635	0.698	0.729	0.760	0.760	0.791
0.510	0.541	0.573	0.573	0.604	0.604	0.635	0.698	0.729	0.760	0.760	0.791
0.240	0.240	0.240	0.240	0.360	0.360	0.360	0.360	0.360	0.360	0.485	0.485
0.135	0.135	0.135	0.135	0.135	0.135	0.166	0.166	0.166	0.166	0.198	0.198
75.54	80.29	85.85	92.20	98.55	105.69	112.04	118.39	125.55	131.90	138.25	145.39
67.46	72.24	77.80	84.15	90.50	97.64	102.39	108.74	115.90	122.25	127.00	134.14
12.95	13.74	14.55	14.55	15.34	15.34	16.13	17.73	18.52	19.30	19.30	20.09
12.95	13.74	14.55	14.55	15.34	15.34	16.13	17.73	18.52	19.30	19.30	20.09
6.10	6.10	6.10	6.10	9.14	9.14	9.14	9.14	9.14	9.14	12.32	12.32
3.43	3.43	3.43	3.43	3.43	3.43	4.22	4.22	4.22	4.22	5.03	5.03

Nominal Diameter
d

4.716

5.106

5.497

5.888

6.284

6.659

7.066

7.412

7.847

8.628

Code

C	max（inch）
E	max（inch）
D	max（inch）	N-00
D		TN-00
G	min（inch）
H	max（inch）
C	max（mm）
E	max（mm）
D	max（mm）	N-00
D		TN-00
G	min（mm）
H	max（mm）

AN-24	AN-26	AN-28	AN-30	AN-32	AN-34	AN-36	AN-38	AN-40	N-44
TAN-24	TAN-26	TAN-128	TAN-130	TAN-132	TAN-134	TAN-136	TAN-138	TAN-140	/
6.130	6.755	7.099	7.693	8.068	8.661	9.068	9.474	9.849	11.005
5.688	6.188	6.531	7.063	7.438	8.031	8.375	8.781	9.156	9.843
0.823	0.885	0.948	0.979	1.041	1.073	1.104	1.135	1.198	1.260
0.823	0.885	1.198	1.260	1.291	1.354	1.416	1.416	1.510	/
0.485	0.610	0.610	0.610	0.610	0.610	0.735	0.735	0.735	0.980
0.198	0.260	0.260	0.291	0.291	0.291	0.323	0.323	0.323	0.510
155.70	171.58	180.31	195.40	204.93	219.99	230.33	240.64	250.16	279.53
144.48	157.18	165.89	179.40	188.92	203.99	212.72	223.04	232.56	250.01
20.90	22.48	24.08	24.87	26.44	27.25	28.04	28.83	30.43	32.00
20.90	22.48	30.43	32.00	32.79	34.39	35.97	35.97	38.35	/
12.32	15.49	15.49	15.49	15.49	15.49	18.67	18.67	18.67	24.89
5.03	6.60	6.60	7.39	7.39	7.39	8.20	8.20	8.20	12.95

Send Inquiry

Similar Standards

1	[DIN] DIN 703 - 1955	Shaft Collar Axle Flande Mounting Shaft Collar
2	[DIN] DIN 1816 - 1971	Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
3	[DIN] DIN 547 - 2024	Round Nuts with Drilled Holes in One Face
4	[DIN] DIN 981 (HM) - 2009	Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
5	[DIN] DIN 981 (KM) - 2009	Locknut of Type KM..., KML... or HM...T,for Use with Type MB... Lockwasher as in Din 5406
6	[DIN] DIN 1804 - 1971	Slotted Round Nuts for Hook Spanner, ISO Metric Fine Thread
7	[DIN] DIN 981 (KM) - 1993	Locknut of Type KM..., KML... or HM...T, for Use with Type MB... Lockwasher as in Din 5406
8	[ANSI] ANSI /ABMA 8.2 - 1999	Locknut Dimensions Inch Design Series N-000
9	[DIN] DIN 547 - 1986	Round Nuts with Drilled Holes in One Face
10	[DIN] DIN 981 (HM) - 1993	Locknut of Type HM .. . , for use with Type MS ... Locking Plate as in DIN 5406
11	[DIN] DIN 546 - 1986	Slotted Round Nuts
12	[DIN] DIN 70852 - 1989	Groove Nuts
13	[DIN] DIN 82013 - 2010	Cargo Lifting Gear - Accessories and Fittings for Lifting - Round Nuts
14	[ANSI] ANSI /ABMA 8.2 - 1999	Removal Nut Dimensions Inch Design Series RN and ARN
15	[ISO] ISO 2982-2 (4 Slot) - 2013	Rolling Bearings - Accessories - Locknut with 4 Slots
16	[DIN] DIN 546 - 2024	Slotted Round Nuts
17	[DIN] DIN 548 - 2007	Round Nuts with Set Pin Holes in Side
18	[ISO] ISO 2982-2 (8Slot) - 2013	Rolling Bearings - Accessories - Locknuts with 8 Slots
19	[DIN] DIN 548 - 2024	Round Nuts with Set Pin Holes in Side
20	[DIN] DIN 547 - 2006	Round Nuts with Drilled Holes in One Face
21	[DIN] DIN 981 (KM) - 1983	Rolling Bearings - Locknuts
22	[DIN] DIN 546 - 2010	Slotted Round Nuts
23	[DIN] DIN 548 - 1986	Round Nuts with Set Pin Holes in Side
24	[GB] GB /T 9160.2 (KM) - 2006	Rolling Bearing Accessories - Locknuts - KM Series
25	[GB] GB 815 - 1988	Round Nuts with Drilled Holes in One Face
26	[GB] GB /T 9160.2 (MSL) - 2006	Rolling Bearing - Locking Clips - MSL Series
27	[GB] GB 9160.3 (KML) - 1988	Rolling Bearing Accessories - Locknuts - KML Series
28	[GB] GB /T 9160.2 (KML) - 2006	Rolling Bearing Accessories - Locknuts - KML Series
29	[GB] GB 9160.3 (KM) - 1988	Rolling Bearing Accessories - Locknuts - KM Series
30	[GB] GB 9160.3 (HM) - 1988	Rolling Bearing Accessories - Locknuts - HM Series
31	[GB] GB 810 - 1988	Small Round Nuts
32	[JIS] JIS B 1554 (AN/ANL) - 2016	Locknuts with 8 Slots
33	[GB] GB /T 9160.2 (HM) - 2017	Rolling Bearing Accessories - Locknuts - HM Series
34	[GB] GB /T 9160.2 (HML) - 2017	Rolling Bearing Accessories - Locknuts - HML Series
35	[GB] GB /T 9160.2 (MS) - 2006	Rolling Bearing - Locking Clips - MS Series
36	[GB] GB 9160.3 (HML) - 1988	Rolling Bearing Accessories - Locknuts - HML Series
37	[GB] GB /T 9160.2 (MSL) - 2017	Rolling Bearing - Locking Clips - MSL Series
38	[GB] GB /T 9160.2 (KM) - 2017	Rolling Bearing Accessories - Locknuts - KM Series
39	[GB] GB 816 - 1988	Round Nuts with Set Pin Holes In Side
40	[GB] GB /T 9160.2 (HML) - 2006	Rolling Bearing Accessories - Locknuts - HML Series
41	[GB] GB /T 9160.2 (KML) - 2017	Rolling Bearing Accessories - Locknuts - KML Series
42	[GB] GB /T 9160.2 (MS) - 2017	Rolling Bearing - Locking Clips - MS Series
43	[GB] GB 817 - 1988	Slotted Round Nuts
44	[JIS] JIS B 1119 (3SR) - 1986	Spectacle Frames - Recessed Round Nuts
45	[NF] NF E 27-413 - 1959	Slotted Round Nuts
46	[GB] GB /T 9160.2 (HM) - 2006	en:Rolling Bearing Accessories - Locknuts - HM Series
47	[NF] NF E 22-111 - 1969	Locknuts - Heavy Series
48	[JIS] JIS B 1554 (AN,HN/ANL,HNL) - 2016	Locknuts with 4 Slots
49	[GB] GB 812 - 1988	Round Nuts
50	[GOST] GOST 10657 - 1980	Round Nuts Slotted on Face
51	[GOST] GOST 11871 - 1988	Slotted Round Nuts, Product Grade A
52	[CNS] CNS 4433 - 1993	Round Nuts with Set Pin Holes In Side
53	[CNS] CNS 4434 - 1993	Round Nuts with Drilled Holes In One Face
54	[CNS] CNS 4465 - 1978	Round Nuts