About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Grooved Pin, Full Length Parallel Grooved with Pilot

DIN EN ISO 8739 - 1998

Display drawing:

德标DIN EN ISO 8739 - 1998 DIN EN ISO8739 Grooved Pin, Full Length Parallel Grooved with Pilot
Download CAD Model*
Download CAD Model

 *Models with different eras.

Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max=nominal size
min
d2 min=nominal size
max
c max
min
a ≈
Minimum Double Shear,kN
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
2 2 2.5 2.5 3 3 4 4 5 5 5 7 7
1 1 1.5 1.5 2 2 3 3 4 4 4 6 6
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,Material:
a) Steel (St), hardness HV125 to 245
b) Austenitic stainless, A1 in accordance with ISO 3506-1, hardness HV210 to 280

Alternative history

DIN 1470 DIN EN ISO 8739 - 1998
Send Inquiry

Similar Standards

1 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
2 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type F
3 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
4 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
5 Grooved Pins-Full-Length Parallel Grooved, with Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Chamfer
6 Grooved Pins, Full Length Parallel Grooved with Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved with Chamfer
7 Grooved Pins - Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins - Half-Length Centre Grooved
8 Grooved Pins-Full-Length Parallel Grooved, with Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Pilot
9 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
10 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
11 Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) 		Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]
12 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
13 Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]
14 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
15 Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) 		Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]
16 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2011 		Grooved Pins, Half Length Grooved with Gorge
17 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
18 Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]
19 Full-Length Parallel Grooved, with Chamfer [EN]
EN 28740 - 1992 		Full-Length Parallel Grooved, with Chamfer
20 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
21 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
22 Grooved Pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved Pins - 1/3 Length Centre Grooved
23 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type F
24 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved with Gorge
25 Grooved Pins. Full-Length Parallel Grooved, with Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved, with Chamfer
26 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
27 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
28 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved with Gorge
29 Grooved Pins - Half-length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-length Centre Grooved
30 Grooved Pins - Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins - Full-length Parallel Grooved, With Pilot
31 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved Pin, Full Length Parallel Grooved with Pilot
32 Grooved Pins. Full Length Paralled Grooved, with Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, with Chamfer
33 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
34 Grooved Pin, Full Length Parallel Grooved with Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved with Chamfer
35 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved with Pilot
36 Grooved Pins-one-third-length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-one-third-length Centre Grooved
37 Grooved Pins-full-length Parallel Grooved, with Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-full-length Parallel Grooved, with Chamferw
38 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
39 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.3 - 2004 		Grooved Pins-One-Third-Length Centre Grooved
40 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
41 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
42 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
43 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F