About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Grooved Pins, Half Length Grooved with Gorge

DIN 1469 - 2012

Display drawing:

德标DIN 1469 - 2012 DIN1469 1469DIN Grooved Pins, Half Length Grooved with Gorge
Download CAD Model
Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs
Default density g/cm3
×

Choose materials based on density.(g/cm3)

  • Carbon Steel 7.85
  • Stainless Steel 8.1
  • Stainless Steel 7.95
  • Stainless Steel 7.7
  • Titanium Alloy 4.5
  • Aluminum Alloy 2.8
  • Copper 8.89


Select here or enter material density on the calculation page.
Nominal Length L Tips:seclect Nominal Length L and get Weight .
Nominal Diameter
d
Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ14 Φ16 Φ20 Φ25
d min
min
a max
min
c ≈
g Type A max
min
m Type A min
max
g Type B max
min
m Type B max
min
g Type C
m Type C Nominal Size（±1/2 IT14）
max
min
r2 Type C
n
Minimum Double Shear,kN
2 2.5 3 4 5 6 8 10 12 14 16 20 25
1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 13.89 15.89 19.87 24.87
1.7 2 2 2.4 2.5 3 3 3.5 3.5 3.5 3.5 4 4
0.7 1 1 1.4 1.5 2 2 2.5 2.5 2.5 2.5 3 3
0.25 0.3 0.4 0.5 0.6 0.8 1 1.2 1.6 1.6 2 2.5 3
- - 2.8 3.8 4.8 5.7 7.6 9.6 11.5 13.4 15.2 19 23.9
- - 2.74 3.725 4.725 5.625 7.51 9.51 11.39 13.29 15.09 18.87 23.77
- - 0.5 0.5 0.7 0.8 0.9 1.1 1.1 1.1 1.1 1.3 1.3
- - 0.64 0.64 0.84 0.94 1.04 1.24 1.24 1.24 1.24 1.44 1.44
1.5 1.9 2.3 3.2 4 5 7 9 10 12 15 19 24
1.44 1.84 2.24 3.125 3.925 4.925 6.91 8.91 9.89 11.89 14.89 18.89 23.87
0.46 0.56 0.67 0.67 0.77 0.77 0.97 1.21 1.31 1.41 1.61 1.86 2.11
0.44 0.54 0.64 0.64 0.74 0.74 0.94 1.15 1.25 1.35 1.55 1.8 2.05
1 1.2 1.5 2.4 2.8 3.8 5 6.8 8.2 9.6 11 14 18
0.8 0.8 1 1.4 1.6 1.6 2 2.6 3 3 4 5 6
0.925 0.925 1.125 1.525 1.725 1.725 2.125 2.725 3.125 3.125 4.15 5.15 6.15
0.675 0.675 0.875 1.275 1.475 1.475 1.875 2.475 2.875 2.875 3.85 4.85 5.85
0.4 0.4 0.5 0.7 0.8 0.8 1 1.3 1.5 1.5 2 2.5 3
0.8 0.8 1 1.4 1.6 1.6 2 2.6 3 3 4 5 6
2.85 4.25 6.15 10.6 16.5 22.8 40.5 63.2 91 124 156.8 236.5 370.1
Weight of per 1000 steel products(≈kg)
- - - - - - - - - - - - -
①,type A , with slot for retaining rings as in DIN 471;
type B , with slot for retaining washers as in DIN 6799;
type C , with rouded slot.
②,Material: Free-cutting steel (St)

Alternative history

DIN 1469 - 1978 DIN 1469 - 2011 DIN 1469 - 2012
Send Inquiry

Similar Standards

1 Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) 		Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]
2 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
3 Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN) [ISO]
ISO 8742 (RN) - 2026 		Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN)
4 Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends [ISO]
ISO 13672 (RN) - 2025 		Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends
5 Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN) [ISO]
ISO 8743 (RN) - 2026 		Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN)
6 Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) 		Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]
7 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type F
8 Grooved Pins - Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins - Half-Length Centre Grooved
9 Full-Length Parallel Grooved, with Chamfer [EN]
EN 28740 - 1992 		Full-Length Parallel Grooved, with Chamfer
10 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
11 Grooved Pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved Pins - 1/3 Length Centre Grooved
12 Pin with Both Chamfered Points (CH) [ISO]
ISO 8740 (CH) - 2025 		Pin with Both Chamfered Points (CH)
13 Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends [ISO]
ISO 13672 (CH) - 2025 		Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends
14 Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH) [ISO]
ISO 8743 (CH) - 2026 		Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH)
15 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
16 Grooved Pin, Full Length Parallel Grooved with Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved with Pilot
17 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
18 Grooved Pins, Full Length Parallel Grooved with Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved with Chamfer
19 Pin Pilot Point and with Chamfered Ends [ISO]
ISO 8739 (CH) - 2025 		Pin Pilot Point and with Chamfered Ends
20 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
21 Grooved Pins-Full-Length Parallel Grooved, with Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Chamfer
22 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
23 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
24 Grooved Pins-Full-Length Parallel Grooved, with Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Pilot
25 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
26 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
27 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
28 Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]
29 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
30 Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]
31 Grooved Pins. Full-Length Parallel Grooved, with Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved, with Chamfer
32 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type F
33  Pin with chamfered point and rounded ends (RN) [ISO]
ISO 8740 (RN) - 2025 		 Pin with chamfered point and rounded ends (RN)
34 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2011 		Grooved Pins, Half Length Grooved with Gorge
35 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
36 Pin with Pilotpoint and Rounded Ends [ISO]
ISO 8739 (RN) - 2025 		Pin with Pilotpoint and Rounded Ends
37 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved with Gorge
38 Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH) [ISO]
ISO 8742 (CH) - 2026 		Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH)
39 Grooved Pins - Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins - Full-length Parallel Grooved, With Pilot
40 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
41 Grooved Pins-full-length Parallel Grooved, with Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-full-length Parallel Grooved, with Chamferw
42 Grooved Pins. Full Length Paralled Grooved, with Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, with Chamfer
43 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
44 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.3 - 2004 		Grooved Pins-One-Third-Length Centre Grooved
45 Grooved Pins - Half-length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-length Centre Grooved
46 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved with Pilot
47 Grooved Pins-one-third-length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-one-third-length Centre Grooved
48 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
49 Grooved Pin, Full Length Parallel Grooved with Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved with Chamfer
50 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved Pin, Full Length Parallel Grooved with Pilot
51 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
52 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
53 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F