About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
DIN 1469 - 2011 Grooved Pins, Half Length Grooved with Gorge

Grooved Pins, Half Length Grooved with Gorge

DIN 1469 - 2011

Display drawing:

德标DIN 1469 - 2011 DIN1469 1469DIN Grooved Pins, Half Length Grooved with Gorge

Scan QR Code

Show on Mobile terminal.
Share with friends!

Alternative history

DIN 1469 - 1978 DIN 1469 - 2011 DIN 1469 - 2012
Send Inquiry

Similar Standards

1 Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) 		Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]
2 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
3 Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN) [ISO]
ISO 8742 (RN) - 2026 		Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN)
4 Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends [ISO]
ISO 13672 (RN) - 2025 		Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends
5 Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN) [ISO]
ISO 8743 (RN) - 2026 		Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN)
6 Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) 		Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]
7 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type F
8 Grooved Pins - Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins - Half-Length Centre Grooved
9 Full-Length Parallel Grooved, with Chamfer [EN]
EN 28740 - 1992 		Full-Length Parallel Grooved, with Chamfer
10 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
11 Grooved Pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved Pins - 1/3 Length Centre Grooved
12 Pin with Both Chamfered Points (CH) [ISO]
ISO 8740 (CH) - 2025 		Pin with Both Chamfered Points (CH)
13 Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends [ISO]
ISO 13672 (CH) - 2025 		Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends
14 Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH) [ISO]
ISO 8743 (CH) - 2026 		Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH)
15 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
16 Grooved Pin, Full Length Parallel Grooved with Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved with Pilot
17 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
18 Grooved Pins, Full Length Parallel Grooved with Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved with Chamfer
19 Pin Pilot Point and with Chamfered Ends [ISO]
ISO 8739 (CH) - 2025 		Pin Pilot Point and with Chamfered Ends
20 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
21 Grooved Pins-Full-Length Parallel Grooved, with Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Chamfer
22 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
23 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
24 Grooved Pins-Full-Length Parallel Grooved, with Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Pilot
25 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
26 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
27 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
28 Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]
29 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
30 Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]
31 Grooved Pins. Full-Length Parallel Grooved, with Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved, with Chamfer
32 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type F
33  Pin with chamfered point and rounded ends (RN) [ISO]
ISO 8740 (RN) - 2025 		 Pin with chamfered point and rounded ends (RN)
34 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
35 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved with Gorge
36 Pin with Pilotpoint and Rounded Ends [ISO]
ISO 8739 (RN) - 2025 		Pin with Pilotpoint and Rounded Ends
37 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved with Gorge
38 Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH) [ISO]
ISO 8742 (CH) - 2026 		Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH)
39 Grooved Pins - Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins - Full-length Parallel Grooved, With Pilot
40 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
41 Grooved Pins-full-length Parallel Grooved, with Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-full-length Parallel Grooved, with Chamferw
42 Grooved Pins. Full Length Paralled Grooved, with Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, with Chamfer
43 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
44 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.3 - 2004 		Grooved Pins-One-Third-Length Centre Grooved
45 Grooved Pins - Half-length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-length Centre Grooved
46 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved with Pilot
47 Grooved Pins-one-third-length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-one-third-length Centre Grooved
48 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
49 Grooved Pin, Full Length Parallel Grooved with Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved with Chamfer
50 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved Pin, Full Length Parallel Grooved with Pilot
51 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
52 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
53 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F