简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Grooved Pins. Full-Length Parallel Grooved,With Chamfer

DIN EN ISO 8740 - 1998

Display drawing:

德标DIN EN ISO 8740 - 1998 DIN EN ISO8740 Grooved Pins. Full-Length Parallel Grooved,With Chamfer
Download CAD Model*
Download CAD Model

 *Models with different eras.

Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max=nominal size
min
d1 max
min
c2 ≈
c
c1 ≈
Minimum Double Shear,kN
L
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
0.12 0.18 0.25 0.3 0.4 0.5 0.6 0.8 1 1.2 1.6 2 2.5
0.6 0.8 1 1.2 1.4 1.7 2.1 2.6 3 3.8 4.6 6 7.5
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
8~20 8~30 10~30 10~40 10~60 14~60 14~80 14~100 14~100 18~100 22~100 26~100 26~100
①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,Material
a) Steel (St), hardness 125 HV30 to 245 HV30
b) Austenitic stainless steel A1 according to ISO 3506-1 hardness 210 HV30 to 280 HV30
③,r ≈ d

Alternative history

DIN 1473 - 1978 DIN EN ISO 8740 - 1998
Send Inquiry

Similar Standards

1 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
2 Grooved Pins -- Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins -- Half-Length Centre Grooved
3 Grooved pins metric series with half-length grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Grooved pins metric series with half-length grooved
4 Metric grooved pins, full-length parallel grooved-metric series [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins, full-length parallel grooved-metric series
5 Metric grooved pins with one third length groove in the middle [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins with one third length groove in the middle
6 Metric grooved pins—half-length centre grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins—half-length centre grooved
7 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
8 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
9 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
10 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
11 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
12 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved pins - Type F
13 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
14 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
15 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F
16 Full-length Parallel Grooved, With Chamfer [EN]
EN 28740 - 1992 		Full-length Parallel Grooved, With Chamfer
17 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
18 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
19 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
20 Grooved Pins — Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins — Full-length Parallel Grooved, With Pilot
21 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
22 Grooved Pins. Full Length Paralled Grooved, With Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, With Chamfer
23 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
24 Grooved Pin, Full Length Parallel Grooved With Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved With Chamfer
25 Grooved pins-One-third-length centre grooved [GB]
GB /T 13829.3 - 2004 		Grooved pins-One-third-length centre grooved
26 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
27 Grooved pin, full length parallel grooved with pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved pin, full length parallel grooved with pilot
28 Grooved Pins-Full-Length Parallel Grooved, With Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-Full-Length Parallel Grooved, With Chamferw
29 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-One-Third-Length Centre Grooved
30 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-Length Centre Grooved
31 Grooved Pins-Full-Length Parallel Grooved, With Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, With Pilot
32 Grooved Pins-Full-Length Parallel Grooved, With Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, With Chamfer
33 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
34 Grooved Pin, Full Length Parallel Grooved With Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved With Pilot
35 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved With Gorge
36 Grooved pins, Half length grooved with gorge [DIN]
DIN 1469 - 2011 		Grooved pins, Half length grooved with gorge
37 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved With Gorge
38 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
39 Grooved Pins, Full Length Parallel Grooved With Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved With Chamfer
40 Grooved pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved pins - 1/3 Length Centre Grooved
41 Grooved Pin, Full Length Parallel Grooved With Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved With Pilot
42 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
43 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved pins - Type F