About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Grooved Pins - Full-length Parallel Grooved, With Pilot

NF E 25-761 - 1997

Display drawing:

法国NF E25-761 - 1997 NF25-761 25-761NF Grooved Pins - Full-length Parallel Grooved, With Pilot
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max
min
d2 Nominal Size
min
max
c max
min
a ≈
Minimum Double Shear,kN
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.6 2.15 2.65 3.2 4.25 5.25 6.3 8.3 10.35 12.35 16.4 20.5 25.5
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
2 2 2.5 2.5 3 3 4 4 5 5 5 7 7
1 1 1.5 1.5 2 2 3 3 4 4 4 6 6
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
①,The grooving angle "α" applies only to grooved pins made from steel (α≈70°). The grooving angle may be modified depending on resilience of material.
Send Inquiry

Similar Standards

1 Grooved Pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved Pins - 1/3 Length Centre Grooved
2  Pin with chamfered point and rounded ends (RN) [ISO]
ISO 8740 (RN) - 2025 		 Pin with chamfered point and rounded ends (RN)
3 Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends [ISO]
ISO 13672 (CH) - 2025 		Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends
4 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
5 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
6 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
7 Pin with Pilotpoint and Rounded Ends [ISO]
ISO 8739 (RN) - 2025 		Pin with Pilotpoint and Rounded Ends
8 Full-Length Parallel Grooved, with Chamfer [EN]
EN 28740 - 1992 		Full-Length Parallel Grooved, with Chamfer
9 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved with Gorge
10 Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]
11 Grooved Pin, Full Length Parallel Grooved with Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved with Pilot
12 Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN) [ISO]
ISO 8743 (RN) - 2026 		Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN)
13 Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) 		Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]
14 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2011 		Grooved Pins, Half Length Grooved with Gorge
15 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
16 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
17 Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) 		Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]
18 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
19 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
20 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type F
21 Grooved Pins. Full-Length Parallel Grooved, with Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved, with Chamfer
22 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved with Gorge
23 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
24 Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends [ISO]
ISO 13672 (RN) - 2025 		Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends
25 Grooved Pins - Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins - Half-Length Centre Grooved
26 Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 		Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]
27 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
28 Pin Pilot Point and with Chamfered Ends [ISO]
ISO 8739 (CH) - 2025 		Pin Pilot Point and with Chamfered Ends
29 Grooved Pins-Full-Length Parallel Grooved, with Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Chamfer
30 Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN) [ISO]
ISO 8742 (RN) - 2026 		Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN)
31 Grooved Pins, Full Length Parallel Grooved with Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved with Chamfer
32 Grooved Pins-Full-Length Parallel Grooved, with Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, with Pilot
33 Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH) [ISO]
ISO 8743 (CH) - 2026 		Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH)
34 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
35 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
36 Pin with Both Chamfered Points (CH) [ISO]
ISO 8740 (CH) - 2025 		Pin with Both Chamfered Points (CH)
37 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
38 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type F
39 Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH) [ISO]
ISO 8742 (CH) - 2026 		Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH)
40 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
41 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
42 Grooved Pins-one-third-length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-one-third-length Centre Grooved
43 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.3 - 2004 		Grooved Pins-One-Third-Length Centre Grooved
44 Grooved Pins. Full Length Paralled Grooved, with Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, with Chamfer
45 Grooved Pin, Full Length Parallel Grooved with Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved with Chamfer
46 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved Pin, Full Length Parallel Grooved with Pilot
47 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
48 Grooved Pins - Half-length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-length Centre Grooved
49 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved with Pilot
50 Grooved Pins-full-length Parallel Grooved, with Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-full-length Parallel Grooved, with Chamferw
51 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
52 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
53 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F