Categories Clear All

+ Bolts & Studs
+ Nuts
+ Screws
+ Washers & Retaining Rings
+ Pins
+ Rivets
+ Welds
+ Tools
+ Indexing elements
+ Anchors
+ Rings, Bushes, Fittings, Collars
+ Clamps,Rigging
+ Dies

Add Filter



Internal Driving


External Driving


Locking Type


Point


NYLOK & EPOXY

NYLOK & EPOXY

Narrow by:

Wire Thread Inserts & Special Tools x
Aerodynamic installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Aerodynamic installation tools for wire thread insert
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) EN 3542 - 1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
Aerospace Series-Inserts, Screw Thread, Helical Coil, Self-Lockong, In Corrosion Resisting Steel FE-PA3004 EN 2944 - 2018
Aerospace Series-Inserts, Screw Thread, Helical Coil, Self-Lockong, In Corrosion Resisting Steel FE-PA3004
Aerospace Series-Inserts, Screw Thread, Helical Coil, Self-Lockong, In Corrosion Resisting Steel FE-PA3004 EN 2944 - 1998
Aerospace Series-Inserts, Screw Thread, Helical Coil, Self-Lockong, In Corrosion Resisting Steel FE-PA3004
Aerospace Series-Inserts, Screw Thread, Helical Coil,Self-Locking, In Heat Resisting Nickel Base Alloy NI-PH2801 (Inconel X750) EN 3542 - 2018
Aerospace Series-Inserts, Screw Thread, Helical Coil,Self-Locking, In Heat Resisting Nickel Base Alloy NI-PH2801 (Inconel X750)
Dismantle tool for wire thread insert ANSI/ASME B 18.29.1 - 1993
Dismantle tool for wire thread insert
Dismantle tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Dismantle tools for wire thread insert
Dismantle tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Dismantle tools for wire thread insert
General Type Wire Thread Inserts - Coarse Thread GB /T 24425.1 - 2009
General Type Wire Thread Inserts - Coarse Thread
General Type Wire Thread Inserts - Fine Thread GB /T 24425.1 - 2009
General Type Wire Thread Inserts - Fine Thread
General Type Wire Thread Inserts For Blind Hole GB /T 24425.2 - 2009
General Type Wire Thread Inserts For Blind Hole
Installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Installation tools for wire thread insert
Installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Installation tools for wire thread insert
Installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Installation tools for wire thread insert
Installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Installation tools for wire thread insert
Installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Installation tools for wire thread insert
Motor-driven installation tools for wire thread insert ANSI/ASME B 18.29.1 - 1993
Motor-driven installation tools for wire thread insert
Prevailing Torque Type Wire Thread Inserts - Coarse Thread GB /T 24425.3 - 2009
Prevailing Torque Type Wire Thread Inserts - Coarse Thread
Prevailing Torque Type Wire Thread Inserts - Fine Thread GB /T 24425.3 - 2009
Prevailing Torque Type Wire Thread Inserts - Fine Thread
Prevailing Torque Type Wire Thread Inserts For Blind Hole GB /T 24425.4 - 2009
Prevailing Torque Type Wire Thread Inserts For Blind Hole
Screwed Inserts (Screw Plugs) DIN 7965 - 1965
Screwed Inserts (Screw Plugs)
Special tap for wire thread insert with UNC thread ANSI/ASME B 18.29.1 - 1993
Special tap for wire thread insert with UNC thread
Special tap for wire thread insert with UNF thread ANSI/ASME B 18.29.1 - 1993
Special tap for wire thread insert with UNF thread
Thin-walled threaded insert, self-tapping, with cutting bores, SBD 347 YJT 5021
Thin-walled threaded insert, self-tapping, with cutting bores, SBD 347
Thin-walled threaded insert, self-tapping, with cutting bores, SBD 348 YJT 5022
Thin-walled threaded insert, self-tapping, with cutting bores, SBD 348
Threaded Insert, Self-Tapping / with Hexagonal Socket, SBI 307 YJT 5007
Threaded Insert, Self-Tapping / with Hexagonal Socket, SBI 307
Threaded insert, self-tapping / with hexagonal socket, SBI 308 YJT 5008
Threaded insert, self-tapping / with hexagonal socket, SBI 308
Threaded Insert, Self-Tapping / with Hexagonal Socket, SBKI 307H YJT 5013
Threaded Insert, Self-Tapping / with Hexagonal Socket, SBKI 307H
Threaded insert, self-tapping / with hexagonal socket, SBKI 308H YJT 5014
Threaded insert, self-tapping / with hexagonal socket, SBKI 308H
Threaded Insert, Self-Tapping / with Hexagonal Socket, SI 302 YJT 5003
Threaded Insert, Self-Tapping / with Hexagonal Socket, SI 302
Threaded Insert, Self-Tapping Imperial Thread, S302 YJT 5002
Threaded Insert, Self-Tapping Imperial Thread, S302
Threaded insert, self-tapping with chip reservoirs Acid and rust-resistant, SBS 337 YJT 5019
Threaded insert, self-tapping with chip reservoirs Acid and rust-resistant, SBS 337
Threaded insert, self-tapping with chip reservoirs Acid and rust-resistant, SBS 338 YJT 5020
Threaded insert, self-tapping with chip reservoirs Acid and rust-resistant, SBS 338
Threaded insert, self-tapping with chip reservoirs and closed floor, SBT 357 YJT 5025
Threaded insert, self-tapping with chip reservoirs and closed floor, SBT 357
Threaded insert, self-tapping with chip reservoirs and closed floor, SBT 358 YJT 5026
Threaded insert, self-tapping with chip reservoirs and closed floor, SBT 358
Threaded insert, self-tapping with chip reservoirs and hexagonal socket, SBSI 337 YJT 5017
Threaded insert, self-tapping with chip reservoirs and hexagonal socket, SBSI 337
Threaded insert, self-tapping with chip reservoirs and hexagonal socket, SBSI 338 YJT 5018
Threaded insert, self-tapping with chip reservoirs and hexagonal socket, SBSI 338
Threaded Insert, Self-Tapping with Chip Reservoirs, SBS 337 YJT 5015
Threaded Insert, Self-Tapping with Chip Reservoirs, SBS 337
Threaded insert, self-tapping with chip reservoirs, SBS 338 YJT 5016
Threaded insert, self-tapping with chip reservoirs, SBS 338
Threaded insert, self-tapping with pilot thread,  SBE 307 YJT 5009
Threaded insert, self-tapping with pilot thread, SBE 307
Threaded Insert, Self-Tapping with Pilot Thread,  SBE 308 YJT 5010
Threaded Insert, Self-Tapping with Pilot Thread, SBE 308
Threaded insert, self-tapping with safety groove, SBN 317 YJT 5023
Threaded insert, self-tapping with safety groove, SBN 317
Threaded insert, self-tapping with safety groove, SBN 318 YJT 5024
Threaded insert, self-tapping with safety groove, SBN 318
Threaded Insert, Self-Tapping, SB 307 YJT 5005
Threaded Insert, Self-Tapping, SB 307
Threaded insert, self-tapping, SB 308 YJT 5006
Threaded insert, self-tapping, SB 308
Threaded Insert, Self-Tapping, SBK 307H YJT 5011
Threaded Insert, Self-Tapping, SBK 307H
Threaded Insert, Self-Tapping, SBK 3081 YJT 5012
Threaded Insert, Self-Tapping, SBK 3081
Threaded insert, self-tapping, SK 302H YJT 5004
Threaded insert, self-tapping, SK 302H
Wire Thread Insert with UNC thread-Lock type ANSI/ASME B 18.29.1 - 1993
Wire Thread Insert with UNC thread-Lock type
Wire Thread Insert with UNF thread-Lock type ANSI/ASME B 18.29.1 - 1993
Wire Thread Insert with UNF thread-Lock type
Wire Thread Inserts For Iso Metric Screw Threads - Part 1: Dimensions, Technical Specifications DIN 8140 (-1) - 1999
Wire Thread Inserts For Iso Metric Screw Threads - Part 1: Dimensions, Technical Specifications