| 简体 | 繁體 |

Click Specification

Unit:inch

Flat Spring Nuts, Type T Twin Boss

SAE J 891 (Figure 16) - 2016

Display drawing:

美标SAE J891 (Figure 16) - 2016 SAE891 891 Flat Spring Nuts, Type T Twin Boss

Size

3.5
#6

3.5
#6

3.5
#6

3.5
#6

3.5
#6

4.2
#8

4.2
#8

4.2
#8

4.2
#8

M		(mm)
		(inch)
A		(mm)	tol. ±0.5
		(inch)	偏差 ±0.02
O		(mm)
		(inch)
P		(mm)
		(inch)
Q		(mm)	min
			max
		(inch)	min
			max
F		(mm)	min
			max
		(inch)	min
			max

12.7	15.88	19.05	22.22	25.4	12.7	15.88	19.05	22.22
0.500	0.625	0.750	0.875	1.000	0.500	0.625	0.750	0.875
28.4	31.8	35.1	38.1	41.1	28.4	31.8	35.1	38.1
1.12	1.25	1.38	1.5	1.62	1.12	1.25	1.38	1.5
7.9	7.9	7.9	7.9	7.9	7.9	7.9	7.9	7.9
0.312	0.312	0.312	0.312	0.312	0.312	0.312	0.312	0.312
9.52	9.52	9.52	9.52	9.52	9.52	9.52	9.52	9.52
0.375	0.375	0.375	0.375	0.375	0.375	0.375	0.375	0.375
0.12	0.12	0.12	0.12	0.12	0.12	0.12	0.12	0.12
1.14	1.14	1.14	1.65	1.65	1.14	1.14	1.14	1.65
0.005	0.005	0.005	0.005	0.005	0.005	0.005	0.005	0.005
0.045	0.045	0.045	0.065	0.065	0.045	0.045	0.045	0.065
0.48	0.48	0.48	0.48	0.48	0.61	0.61	0.61	0.61
0.66	0.66	0.66	0.66	0.66	0.74	0.74	0.74	0.74
0.019	0.019	0.019	0.019	0.019	0.024	0.024	0.024	0.024
0.026	0.026	0.026	0.026	0.026	0.029	0.029	0.029	0.029

Size

4.2
#8

4.8
#10

4.8
#10

4.8
#10

4.8
#10

4.8
#10

6.3
#14 or 1/4

6.3
#14 or 1/4

6.3
#14 or 1/4

M		(mm)
		(inch)
A		(mm)	tol. ±0.5
		(inch)	偏差 ±0.02
O		(mm)
		(inch)
P		(mm)
		(inch)
Q		(mm)	min
			max
		(inch)	min
			max
F		(mm)	min
			max
		(inch)	min
			max

25.4	12.7	15.88	19.05	22.22	25.4	19.05	22.22	25.4
1.000	0.500	0.625	0.750	0.875	1.000	0.750	0.875	1.000
41.1	28.4	31.8	35.1	38.1	41.1	38.1	41.1	44.4
1.62	1.12	1.25	1.38	1.5	1.62	1.5	1.62	1.75
7.9	7.9	7.9	7.9	7.9	7.9	9.52	9.52	9.52
0.312	0.312	0.312	0.312	0.312	0.312	0.375	0.375	0.375
9.52	12.7	12.7	12.7	12.7	12.7	14.27	14.27	14.27
0.375	0.500	0.500	0.500	0.500	0.500	0.562	0.562	0.562
0.12	0.12	0.12	0.12	0.12	0.12	0.12	0.12	0.12
1.65	1.14	1.14	1.14	1.65	1.65	1.65	1.65	1.65
0.005	0.005	0.005	0.005	0.005	0.005	0.005	0.005	0.005
0.065	0.045	0.045	0.045	0.065	0.065	0.065	0.065	0.065
0.61	0.71	0.71	0.71	0.71	0.71	0.71	0.71	0.71
0.74	0.84	0.84	0.84	0.84	0.84	0.99	0.99	0.99
0.024	0.028	0.028	0.028	0.028	0.028	0.028	0.028	0.028
0.029	0.033	0.033	0.033	0.033	0.033	0.039	0.039	0.039

Similar Standards

1		[YJT] YJT 3015	Cage Nuts [Previously YJT 1056] View Suppliers
2		[DIN] DIN 34818 - 2002	Sheet Spring Nuts with Tapping Screw Thread
3		[DIN] DIN 34818 - 1999	Sheet Spring Nuts with Tapping Screw Thread
4		[JIS] JIS B 1216 (R) - 2006	Push-On Spring Square Nuts
5		[SAE] SAE J 891 (Figure 13) - 2016	Flat Spring Nuts, Type P Single Boss
6		[YJT] YJT 3034	Clip-on Nuts
7		[YJT] YJT 3031	Cage Nuts - Standard
8		[YJT] YJT 3027	Half Round Nut (HRN) [Previously YJT 200819 (HRN)]
9		[SAE] SAE J 892 (F8) - 1996	Push-on Spring Nuts (Inch Series) - Blind, Panel Retained
10		[SAE] SAE J 892 (F7) - 1996	Push-on Spring Nuts (Inch series) - Blind, Stud Retained Style
11		[SAE] SAE J 892 (F1) - 1996	Push-on Spring Nuts (Inch Series) - Rectangular Arched
12		[SAE] SAE J 891 (Figure 15) - 2016	Flat Spring Nuts, Type T Single Boss
13		[SAE] SAE J 891 (Figure 14) - 2016	Flat Spring Nuts, Type P Twin Boss
14		[SAE] SAE J 891 (Figure 11) - 2016	Type T, U Shape Regular Design Spring Nuts
15		[SAE] SAE J 891 (Figure 10) - 2016	Type T, J Shape Regular Design Spring Nuts
16		[SAE] SAE J 891 (Figure 9) - 2016	Type P, U Shape Regular Design Spring Nuts
17		[SAE] SAE J 891 (Figure 8) - 2016	Type P, J Shape Regular Design Spring Nuts
18		[SAE] SAE J 891 (Figure 7) - 2016	U Shape Wide-range Design Spring Nuts with or Without Retaining Extrusion
19		[YJT] YJT 3020	Nuts with Springs(41/41SN) [Previously YJT 3259]