Click Specification

M10

M12

Cage Nut with Earth Continuity

YJT 3032

Display drawing:

Thread Size

M10

M12

b
A
L
D
e
F
G
N	Hole size

1.5~2.0	1.5~2.0	1.5~2.0	1.5~2.0	1.5~2.0	1.5~2.0	2.3~3.9	2.3~3.9	2.3~3.9
12	12	12	13.2	13.2	13.2	20.4	20.4	20.4
8.5	8.5	8.5	9.5	9.5	9.5	16.5	16.5	16.5
7.2	7.2	7.2	8.2	8.2	8.2	12.6	12.6	12.6
0.45	0.45	0.45	0.45	0.45	0.45	0.6	0.6	0.6
12.2	12.2	12.2	13.5	13.5	13.5	20.4	20.4	20.4
6	6	6	6	6	6	10.5	10.5	10.5
8.3	8.3	8.3	9.5	9.5	9.5	14.0	14.0	14.0

Send Inquiry

Similar Standards

1	[YJT] YJT 3015	Cage Nuts View Suppliers
2	[DIN] DIN 34818 - 2002	Sheet Spring Nuts with Tapping Screw Thread
3	[DIN] DIN 34818 - 1999	Sheet Spring Nuts with Tapping Screw Thread
4	[GB] GB 930 - 1988	Selt-Locking Nuts, Twolug, Anchor
5	[JIS] JIS B 1216 (R) - 2006	Push-On Spring Square Nuts
6	[YJT] YJT 3034	Clip-on Nuts
7	[YJT] YJT 3033	Cage Nut, Front Assembling
8	[YJT] YJT 3031	Cage Nuts - Standard
9	[YJT] YJT 3027 (HRN)	Half Round Nut
10	[SAE] SAE J 892 (F8) - 1996	Push-on Spring Nuts (Inch Series) - Blind, Panel Retained
11	[SAE] SAE J 892 (F7) - 1996	Push-on Spring Nuts (Inch series) - Blind, Stud Retained Style
12	[SAE] SAE J 892 (F1) - 1996	Push-on Spring Nuts (Inch Series) - Rectangular Arched
13	[SAE] SAE J 891 (Figure 16) - 2016	Flat Spring Nuts, Type T Twin Boss
14	[SAE] SAE J 891 (Figure 15) - 2016	Flat Spring Nuts, Type T Single Boss
15	[SAE] SAE J 891 (Figure 14) - 2016	Flat Spring Nuts, Type P Twin Boss
16	[SAE] SAE J 891 (Figure 13) - 2016	Flat Spring Nuts, Type P Single Boss
17	[SAE] SAE J 891 (Figure 11) - 2016	Type T, U Shape Regular Design Spring Nuts
18	[SAE] SAE J 891 (Figure 10) - 2016	Type T, J Shape Regular Design Spring Nuts
19	[SAE] SAE J 891 (Figure 9) - 2016	Type P, U Shape Regular Design Spring Nuts
20	[SAE] SAE J 891 (Figure 8) - 2016	Type P, J Shape Regular Design Spring Nuts
21	[SAE] SAE J 891 (Figure 7) - 2016	U Shape Wide-range Design Spring Nuts with or Without Retaining Extrusion
22	[YJT] YJT 3020 (41/41SN)	Nuts with Springs