About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Coild Helical Spring For Press Dies - Type HJ

JIS B 5012 (HJ) - 2008

Display drawing:

日标JIS B5012 (HJ) - 2008 JIS5012 5012JIS Coild Helical Spring For Press Dies - Type HJ
Nominal Diameter
D
10
×20 		10
×25 		10
×30 		10
×35 		10
×40 		10
×45 		10
×50 		10
×55 		10
×60 		12
×20 		12
×25 		12
×30 		12
×35 		12
×40 		12
×45
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
20 25 30 35 40 45 50 55 60 20 25 30 35 40 45
5 5 5 5 5 5 5 5 5 6 6 6 6 6 6
4.3 5.4 6.5 7.6 8.6 9.7 10.8 11.9 13 4.3 5.4 6.5 7.6 8.6 9.7
265 265 265 265 265 265 265 265 265 373 373 373 373 373 373
4.8 6 7.2 8.4 9.6 10.8 12 13.2 14.4 4.8 6 7.2 8.4 9.6 10.8
61.6 49.1 40.8 34.9 30.8 27.3 24.5 22.3 20.4 86.7 69.1 57.4 49.1 43.4 38.5
Nominal Diameter
D
12
×50 		12
×55 		12
×60 		12
×65 		12
×70 		14
×25 		14
×30 		14
×35 		14
×40 		14
×45 		14
×50 		14
×55 		14
×60 		14
×65 		14
×70
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
50 55 60 65 70 25 30 35 40 45 50 55 60 65 70
6 6 6 6 6 7 7 7 7 7 7 7 7 7 7
10.8 11.9 13 14 15.1 5.4 6.5 7.6 8.6 9.7 10.8 11.9 13 14 15.1
373 373 373 373 373 520 520 520 520 520 520 520 520 520 520
12 13.2 14.4 15.6 16.8 6 7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.8
34.5 31.5 28.7 26.6 24.7 96.3 80 68.4 60.5 53.6 48.1 43.7 40 37.1 34.4
Nominal Diameter
D
14
×75 		14
×80 		16
×25 		16
×30 		16
×35 		16
×40 		16
×45 		16
×50 		16
×55 		16
×60 		16
×65 		16
×70 		16
×75 		16
×80 		16
×90
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
75 80 25 30 35 40 45 50 55 60 65 70 75 80 90
7 7 8 8 8 8 8 8 8 8 8 8 8 8 8
16.2 17.3 5.4 6.5 7.6 8.6 9.7 10.8 11.9 13 14 15.1 16.2 17.3 19.4
520 520 667 667 667 667 667 667 667 667 667 667 667 667 667
18 19.2 6 7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.38 18 19.2 21.6
32.1 30.1 125.4 104.2 89.1 78.7 69.8 62.7 56.9 52.1 48.4 44.8 41.8 39.1 34.9
Nominal Diameter
D
18
×25 		18
×30 		18
×35 		18
×40 		18
×45 		18
×50 		18
×55 		18
×60 		18
×65 		18
×70 		18
×75 		18
×80 		18
×90 		18
×100 		20
×25
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
25 30 35 40 45 50 55 60 65 70 75 80 90 100 25
9 9 9 9 9 9 9 9 9 9 9 9 9 9 10
5.4 6.5 7.6 8.6 9.7 10.8 11.9 13 14 15.1 16.2 17.3 19.4 21.6 5.4
853 853 853 853 853 853 853 853 853 853 853 853 853 853 1059
6 7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.8 18 19.2 21.6 24 6
158 131.2 112.2 99.2 87.9 79 71.7 65.6 60.9 56.5 52.7 49.3 44 39.5 196.1
Nominal Diameter
D
20
×30 		20
×35 		20
×40 		20
×45 		20
×50 		20
×55 		20
×60 		20
×65 		20
×70 		20
×75 		20
×80 		20
×90 		20
×100 		22
×30 		22
×35
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
30 35 40 45 50 55 60 65 70 75 80 90 100 30 35
10 10 10 10 10 10 10 10 10 10 10 10 10 11 11
6.5 7.6 8.6 9.7 10.8 11.9 13 14 15.1 16.2 17.3 19.4 21.6 6.5 7.6
1059 1059 1059 1059 1059 1059 1059 1059 1059 1059 1059 1059 1059 1275 1275
7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.8 18 19.2 21.6 24 7.2 8.4
162.9 139.3 123.1 109.2 98.1 89 81.5 75.6 70.1 65.4 61.2 54.6 49 196.2 167.8
Nominal Diameter
D
22
×40 		22
×45 		22
×50 		22
×55 		22
×60 		22
×65 		22
×70 		22
×75 		22
×80 		22
×90 		22
×100 		22
×125 		25
×30 		25
×35 		25
×40
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
40 45 50 55 60 65 70 75 80 90 100 125 30 35 40
11 11 11 11 11 11 11 11 11 11 11 11 12.5 12.5 12.5
8.6 9.7 10.8 11.9 13 14 15.1 16.2 17.3 19.4 21.6 27 6.5 7.6 8.6
1275 1275 1275 1275 1275 1275 1275 1275 1275 1275 1275 1275 1657 1657 1657
9.6 10.8 12 13.2 14.4 15.6 16.8 18 19.2 21.6 24 30 7.2 8.4 9.6
148.3 131.4 118.1 107.1 98.1 91.1 84.4 78.7 73.7 65.7 59 47.2 255 218 192.7
Nominal Diameter
D
25
×45 		25
×50 		25
×55 		25
×60 		25
×65 		25
×70 		25
×75 		25
×80 		25
×90 		25
×100 		25
×125 		25
×150 		27
×35 		27
×40 		27
×45
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
45 50 55 60 65 70 75 80 90 100 125 150 35 40 45
12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 13.5 13.5 13.5
9.7 10.8 11.9 13 14 15.1 16.2 17.3 19.4 21.6 27 32.4 7.6 8.6 9.7
1657 1657 1657 1657 1657 1657 1657 1657 1657 1657 1657 1657 1932 1932 1932
10.8 12 13.2 14.4 15.6 16.8 18 19.2 21.6 24 30 36 8.4 9.6 10.8
170.8 153.4 139.2 127.5 118.4 109.7 102.3 95.8 85.4 76.7 61.4 51.1 254 225 199.2
Nominal Diameter
D
27
×50 		27
×55 		27
×60 		27
×65 		27
×70 		27
×75 		27
×80 		27
×90 		27
×100 		27
×125 		27
×150 		30
×40 		30
×45 		30
×50 		30
×55
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
50 55 60 65 70 75 80 90 100 125 150 40 45 50 55
13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 15 15 15 15
10.8 11.9 13 14 15.1 16.2 17.3 19.4 21.6 27 32.4 8.6 9.7 10.8 11.9
1932 1932 1932 1932 1932 1932 1932 1932 1932 1932 1932 2380 2380 2380 2380
12 13.2 14.4 15.6 16.8 18 19.2 21.6 24 30 36 9.6 10.8 12 13.2
178.9 162.4 148.6 138 127.9 119.3 111.7 99.6 89.4 71.6 59.6 277 245 220 200
Nominal Diameter
D
30
×60 		30
×65 		30
×70 		30
×75 		30
×80 		30
×90 		30
×100 		30
×125 		30
×150 		30
×175 		35
×45 		35
×50 		35
×55 		35
×60 		35
×65
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
60 65 70 75 80 90 100 125 150 175 45 50 55 60 65
15 15 15 15 15 15 15 15 15 15 17.5 17.5 17.5 17.5 17.5
13 14 15.1 16.2 17.3 19.4 21.6 27 32.4 37.8 9.7 10.8 11.9 13 14
2380 2380 2380 2380 2380 2380 2380 2380 2380 2380 3240 3240 3240 3240 3240
14.4 15.6 16.8 18 19.2 21.6 24 30 36 42 10.8 12 13.2 14.4 15.6
183.1 170 157.6 146.9 137.6 122.7 110.2 88.1 73.5 63 334 300 272 249 231
Nominal Diameter
D
35
×70 		35
×75 		35
×80 		35
×90 		35
×100 		35
×125 		35
×150 		35
×175 		35
×200 		40
×50 		40
×55 		40
×60 		40
×65 		40
×70 		40
×75
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
70 75 80 90 100 125 150 175 200 50 55 60 65 70 75
17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 20 20 20 20 20 20
15.1 16.2 17.3 19.4 21.6 27 32.4 37.8 43.2 10.8 11.9 13 14 15.1 16.2
3240 3240 3240 3240 3240 3240 3240 3240 3240 4240 4240 4240 4240 4240 4240
16.8 18 19.2 21.6 24 30 36 42 48 12 13.2 14.4 15.6 16.8 18
215 200 187.3 167 150 120 100 85.7 75 393 356 326 303 281 262
Nominal Diameter
D
40
×80 		40
×90 		40
×100 		40
×125 		40
×150 		40
×175 		40
×200 		40
×250 		50
×60 		50
×65 		50
×70 		50
×75 		50
×80 		50
×90 		50
×100
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
80 90 100 125 150 175 200 250 60 65 70 75 80 90 100
20 20 20 20 20 20 20 20 25 25 25 25 25 25 25
17.3 19.4 21.6 27 32.4 37.8 43.2 54 13 14 15.1 16.2 17.3 19.4 21.6
4240 4240 4240 4240 4240 4240 4240 4240 6620 6620 6620 6620 6620 6620 6620
19.2 21.6 24 30 36 42 48 60 14.4 15.6 16.8 18 19.2 21.6 24
245 219 196.3 157 130.9 112.2 98.1 78.5 509 473 438 409 383 341 306
Nominal Diameter
D
50
×125 		50
×150 		50
×175 		50
×200 		50
×250 		50
×300 		60
×80 		60
×90 		60
×100 		60
×125 		60
×150 		60
×175 		60
×200 		60
×250 		60
×300
L0
D1
deflection, σ （L0×21.6%）
load（±10%，N）
Maximum operating deflection σ （L0×24%）
Spring rate(N/mm)
125 150 175 200 250 300 80 90 100 125 150 175 200 250 300
25 25 25 25 25 25 30 30 30 30 30 30 30 30 30
27 32.4 37.8 43.2 54 64.8 17.3 19.4 21.6 27 32.4 37.8 43.2 54 64.8
6620 6620 6620 6620 6620 6620 9540 9540 9540 9540 9540 9540 9540 9540 9540
30 36 42 48 60 72 19.2 21.6 24 30 36 42 48 60 72
245 204 175.1 153.2 122.6 102.2 551 492 442 353 294 252 221 176.7 147.2
Send Inquiry

Similar Standards

1 Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green) [ISO]
ISO 10243 (L) - 2019 		Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green)
2 Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter [DIN]
DIN 2098-1 - 1968 		Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter
3 Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow) [ISO]
ISO 10243 (EH) - 2019 		Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow)
4 Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red) [ISO]
ISO 10243 (H) - 2019 		Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red)
5 Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue) [ISO]
ISO 10243 (M) - 2019 		Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue)
6 Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter [DIN]
DIN 2098-2 - 1970 		Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter
7 Coild Helical Spring For Press Dies - Type L (color code: green) [JIS]
JIS B 5012 (L) - 2008 		Coild Helical Spring For Press Dies - Type L (color code: green)
8 Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow) [GB]
GB /T 36524 (EH) - 2018 		Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow)
9 Coild Helical Spring For Press Dies - Type B (color code: yellow) [JIS]
JIS B 5012 (B) - 2008 		Coild Helical Spring For Press Dies - Type B (color code: yellow)
10 Coild Helical Spring For Press Dies - Type BJ [JIS]
JIS B 5012 (BJ) - 2008 		Coild Helical Spring For Press Dies - Type BJ
11 Coild Helical Spring For Press Dies - Type LJ [JIS]
JIS B 5012 (LJ) - 2008 		Coild Helical Spring For Press Dies - Type LJ
12 Coild Helical Spring For Press Dies - Type MJ [JIS]
JIS B 5012 (MJ) - 2008 		Coild Helical Spring For Press Dies - Type MJ
13 Small Cylindrically Coiled Compression Spring, Stainless Steel [GB]
GB /T 1973.3 - 2005 		Small Cylindrically Coiled Compression Spring, Stainless Steel
14 Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red) [GB]
GB /T 36524 (H) - 2018 		Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red)
15 Small Cylindrically Coiled Compression Spring, Carbon Steel [GB]
GB /T 1973.3 - 2005 		Small Cylindrically Coiled Compression Spring, Carbon Steel
16 Cylindrical Coiled Compression Spring [GB]
GB /T 2089 - 2009 		Cylindrical Coiled Compression Spring
17 Coild Helical Spring For Press Dies - Type H (color code: red) [JIS]
JIS B 5012 (H) - 2008 		Coild Helical Spring For Press Dies - Type H (color code: red)
18 Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue) [GB]
GB /T 36524 (M) - 2018 		Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue)
19 Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green) [GB]
GB /T 36524 (L) - 2018 		Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green)
20 Coild Helical Spring For Press Dies - Type FJ [JIS]
JIS B 5012 (FJ) - 2008 		Coild Helical Spring For Press Dies - Type FJ
21 Coild Helical Spring For Press Dies - Type M (color code: blue) [JIS]
JIS B 5012 (M) - 2008 		Coild Helical Spring For Press Dies - Type M (color code: blue)