About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Coild Helical Spring For Press Dies - Type FJ

JIS B 5012 (FJ) - 2008

Display drawing:

日标JIS B5012 (FJ) - 2008 JIS5012 5012JIS Coild Helical Spring For Press Dies - Type FJ
Nominal Diameter
D
10
×20 		10
×25 		10
×30 		10
×35 		10
×40 		10
×45 		10
×50 		10
×55 		10
×60 		12
×20 		12
×25 		12
×30 		12
×35 		12
×40 		12
×45
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
20 25 30 35 40 45 50 55 60 20 25 30 35 40 45
5 5 5 5 5 5 5 5 5 6 6 6 6 6 6
9 11.3 13.5 15.8 18 20.3 22.5 24.8 27 9 11.3 13.5 15.8 18 20.3
88.3 88.3 88.3 88.3 88.3 88.3 88.3 88.3 88.3 122.6 122.6 122.6 122.6 122.6 122.6
10 12.5 15 17.5 20 22.5 25 27.5 30 10 12.5 15 17.5 20 22.5
9.8 7.8 6.5 5.6 4.9 4.3 3.9 3.6 3.3 13.6 10.8 9.1 7.8 6.8 6
Nominal Diameter
D
12
×50 		12
×55 		12
×60 		12
×65 		12
×70 		14
×25 		14
×30 		14
×35 		14
×40 		14
×45 		14
×50 		14
×55 		14
×60 		14
×65 		14
×70
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
50 55 60 65 70 25 30 35 40 45 50 55 60 65 70
6 6 6 6 6 7 7 7 7 7 7 7 7 7 7
22.5 24.8 27 29.3 31.5 11.3 13.5 15.8 18 20.3 22.5 24.8 27 29.3 31.5
122.6 122.6 122.6 122.6 122.6 156.9 156.9 156.9 156.9 156.9 156.9 156.9 156.9 156.9 156.9
25 27.5 30 32.5 35 12.5 15 17.5 20 22.5 25 27.5 30 32.5 35
5.4 4.9 4.5 4.2 3.9 13.9 11.6 9.9 8.7 7.7 7 6.3 5.8 5.4 5
Nominal Diameter
D
14
×75 		14
×80 		16
×25 		16
×30 		16
×35 		16
×40 		16
×45 		16
×50 		16
×55 		16
×60 		16
×65 		16
×70 		16
×75 		16
×80 		16
×90
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
75 80 25 30 35 40 45 50 55 60 65 70 75 80 90
7 7 8 8 8 8 8 8 8 8 8 8 8 8 8
33.8 36 11.3 13.5 15.8 18 20.3 22.5 24.8 27 29.3 31.5 33.8 36 40.5
156.9 156.9 186.3 186.3 186.3 186.3 186.3 186.3 186.3 186.3 186.3 186.3 186.3 186.3 186.3
37.5 40 12.5 15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40 45
4.6 4.4 16.5 13.8 11.8 10.4 9.2 8.3 7.5 6.9 6.4 5.9 5.5 5.2 4.6
Nominal Diameter
D
18
×25 		18
×30 		18
×35 		18
×40 		18
×45 		18
×50 		18
×55 		18
×60 		18
×65 		18
×70 		18
×75 		18
×80 		18
×90 		18
×100 		20
×25
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
25 30 35 40 45 50 55 60 65 70 75 80 90 100 25
9 9 9 9 9 9 9 9 9 9 9 9 9 9 11
11.3 13.5 15.8 18 20.3 22.5 24.8 27 29.3 31.5 33.8 36 40.5 45 11.3
226 226 226 226 226 226 226 226 226 226 226 226 226 226 284
12.5 15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40 45 50 12.5
20 16.7 14.3 12.6 11.1 10 9.1 8.4 7.7 7.2 6.7 6.3 5.6 5 25.1
Nominal Diameter
D
20
×30 		20
×35 		20
×40 		20
×45 		20
×50 		20
×55 		20
×60 		20
×65 		20
×70 		20
×75 		20
×80 		20
×90 		20
×100 		22
×30 		22
×35
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
30 35 40 45 50 55 60 65 70 75 80 90 100 30 35
11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
13.5 15.8 18 20.3 22.5 24.8 27 29.3 31.5 33.8 36 40.5 45 13.5 15.8
284 284 284 284 284 284 284 284 284 284 284 284 284 353 353
15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40 45 50 15 17.5
21 18 15.8 14 12.6 11.5 10.5 9.7 9 8.4 7.9 7 6.3 26.1 22.3
Nominal Diameter
D
22
×40 		22
×45 		22
×50 		22
×55 		22
×60 		22
×65 		22
×70 		22
×75 		22
×80 		22
×90 		22
×100 		22
×125 		25
×30 		25
×35 		25
×40
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
40 45 50 55 60 65 70 75 80 90 100 125 30 35 40
11 11 11 11 11 11 11 11 11 11 11 11 13.5 13.5 13.5
18 20.3 22.5 24.8 27 29.3 31.5 33.8 36 40.5 45 56.3 13.5 15.8 18
353 353 353 353 353 353 353 353 353 353 353 353 441 441 441
20 22.5 25 27.5 30 32.5 35 37.5 40 45 50 62.5 15 17.5 20
19.6 17.4 15.7 14.2 13.1 12 11.2 10.4 9.8 8.7 7.8 6.3 32.7 27.9 24.5
Nominal Diameter
D
25
×45 		25
×50 		25
×55 		25
×60 		25
×65 		25
×70 		25
×75 		25
×80 		25
×90 		25
×100 		25
×125 		25
×150 		27
×35 		27
×40 		27
×45
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
45 50 55 60 65 70 75 80 90 100 125 150 35 40 45
13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
20.3 22.5 24.8 27 29.3 31.5 33.8 36 40.5 45 56.3 67.5 15.8 18 20.3
441 441 441 441 441 441 441 441 441 441 441 441 530 530 530
22.5 25 27.5 30 32.5 35 37.5 40 45 50 62.5 75 17.5 20 22.5
21.7 19.6 17.8 16.3 15.1 14 13 12.3 10.9 9.8 7.8 6.5 33.5 29.4 26.1
Nominal Diameter
D
27
×50 		27
×55 		27
×60 		27
×65 		27
×70 		27
×75 		27
×80 		27
×90 		27
×100 		27
×125 		27
×150 		30
×40 		30
×45 		30
×50 		30
×55
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
50 55 60 65 70 75 80 90 100 125 150 40 45 50 55
13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 16 16 16 16
22.5 24.8 27 29.3 31.5 33.8 36 40.5 45 56.3 67.5 - 20.3 22.5 24.8
530 530 530 530 530 530 530 530 530 530 530 - - - -
25 27.5 30 32.5 35 37.5 40 45 50 62.5 75 20 22.5 25 27.5
23.6 21.4 19.6 18.1 16.8 15.7 14.7 13.1 11.8 9.4 7.9 35.4 31.4 28.3 25.7
Nominal Diameter
D
30
×60 		30
×65 		30
×70 		30
×75 		30
×80 		30
×90 		30
×100 		30
×125 		30
×150 		30
×175 		35
×45 		35
×50 		35
×55 		35
×60 		35
×65
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
60 65 70 75 80 90 100 125 150 175 45 50 55 60 65
16 16 16 16 16 16 16 16 16 16 19 19 19 19 19
27 29.3 31.5 33.8 36 40.5 45 56.3 67.5 78.8 20.3 22.5 24.8 27 29.3
- - - - - - - - - - 863 863 863 863 863
30 32.5 35 37.5 40 45 50 62.5 75 87.5 22.5 25 27.5 30 32.5
23.6 21.7 20.2 18.8 17.7 15.7 14.2 11.3 9.4 8.1 42.5 38.4 34.8 32 29.5
Nominal Diameter
D
35
×70 		35
×75 		35
×80 		35
×90 		35
×100 		35
×125 		35
×150 		35
×175 		35
×200 		40
×50 		40
×55 		40
×60 		40
×65 		40
×70 		40
×75
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
70 75 80 90 100 125 150 175 200 50 55 60 65 70 75
19 19 19 19 19 19 19 19 19 22 22 22 22 22 22
31.5 33.8 36 40.5 45 56.3 67.5 78.8 90 22.5 24.8 27 29.3 31.5 33.8
863 863 863 863 863 863 863 863 863 1128 1128 1128 1128 1128 1128
35 37.5 40 45 50 62.5 75 87.5 100 25 27.5 30 32.5 35 37.5
27.4 25.5 24 21.3 19.2 15.3 12.8 11 9.6 50.1 45.5 41.8 38.5 35.8 33.4
Nominal Diameter
D
40
×80 		40
×90 		40
×100 		40
×125 		40
×150 		40
×175 		50
×60 		50
×65 		50
×70 		50
×75 		50
×80 		50
×90 		50
×100 		50
×125 		50
×150
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
80 90 100 125 150 175 60 65 70 75 80 90 100 125 150
22 22 22 22 22 22 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5
36 40.5 45 56.3 67.5 78.8 27 29.3 31.5 33.8 36 40.5 45 56.3 67.5
1128 1128 1128 1128 1128 1128 1765 1765 1765 1765 1765 1765 1765 1765 1765
40 45 50 62.5 75 87.5 30 32.5 35 37.5 40 45 50 62.5 75
31.3 27.9 25.1 20 16.7 14.3 65.4 60.2 56 52.2 49 43.6 39.2 31.3 26.1
Nominal Diameter
D
50
×175 		50
×200 		50
×250 		50
×300 		60
×80 		60
×90 		60
×100 		60
×125 		60
×150 		60
×175 		60
×200 		60
×250 		60
×300
L0
D1
deflection, σ （L0×45%）
load（±10%，N）
Maximum operating deflection σ （L0×50%）
Spring rate(N/mm)
175 200 250 300 80 90 100 125 150 175 200 250 300
27.5 27.5 27.5 27.5 33 33 33 33 33 33 33 33 33
78.8 90 112.5 135 36 40.5 45 56.3 67.5 78.8 90 112.5 135
1765 1765 1765 1765 2540 2540 2540 2540 2540 2540 2540 2540 2540
87.5 100 125 150 40 45 50 62.5 75 87.5 100 125 150
22.4 19.6 15.7 13.1 70.6 62.7 56.4 45.1 37.6 32.2 28.2 22.6 18.8
Send Inquiry

Similar Standards

1 Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green) [ISO]
ISO 10243 (L) - 2019 		Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green)
2 Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter [DIN]
DIN 2098-1 - 1968 		Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter
3 Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow) [ISO]
ISO 10243 (EH) - 2019 		Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow)
4 Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red) [ISO]
ISO 10243 (H) - 2019 		Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red)
5 Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue) [ISO]
ISO 10243 (M) - 2019 		Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue)
6 Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter [DIN]
DIN 2098-2 - 1970 		Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter
7 Coild Helical Spring For Press Dies - Type L (color code: green) [JIS]
JIS B 5012 (L) - 2008 		Coild Helical Spring For Press Dies - Type L (color code: green)
8 Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow) [GB]
GB /T 36524 (EH) - 2018 		Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow)
9 Coild Helical Spring For Press Dies - Type B (color code: yellow) [JIS]
JIS B 5012 (B) - 2008 		Coild Helical Spring For Press Dies - Type B (color code: yellow)
10 Coild Helical Spring For Press Dies - Type BJ [JIS]
JIS B 5012 (BJ) - 2008 		Coild Helical Spring For Press Dies - Type BJ
11 Coild Helical Spring For Press Dies - Type LJ [JIS]
JIS B 5012 (LJ) - 2008 		Coild Helical Spring For Press Dies - Type LJ
12 Coild Helical Spring For Press Dies - Type MJ [JIS]
JIS B 5012 (MJ) - 2008 		Coild Helical Spring For Press Dies - Type MJ
13 Small Cylindrically Coiled Compression Spring, Stainless Steel [GB]
GB /T 1973.3 - 2005 		Small Cylindrically Coiled Compression Spring, Stainless Steel
14 Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red) [GB]
GB /T 36524 (H) - 2018 		Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red)
15 Small Cylindrically Coiled Compression Spring, Carbon Steel [GB]
GB /T 1973.3 - 2005 		Small Cylindrically Coiled Compression Spring, Carbon Steel
16 Cylindrical Coiled Compression Spring [GB]
GB /T 2089 - 2009 		Cylindrical Coiled Compression Spring
17 Coild Helical Spring For Press Dies - Type HJ [JIS]
JIS B 5012 (HJ) - 2008 		Coild Helical Spring For Press Dies - Type HJ
18 Coild Helical Spring For Press Dies - Type H (color code: red) [JIS]
JIS B 5012 (H) - 2008 		Coild Helical Spring For Press Dies - Type H (color code: red)
19 Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue) [GB]
GB /T 36524 (M) - 2018 		Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue)
20 Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green) [GB]
GB /T 36524 (L) - 2018 		Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green)
21 Coild Helical Spring For Press Dies - Type M (color code: blue) [JIS]
JIS B 5012 (M) - 2008 		Coild Helical Spring For Press Dies - Type M (color code: blue)