About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Coild Helical Spring For Press Dies - Type MJ

JIS B 5012 (MJ) - 2008

Display drawing:

日标JIS B5012 (MJ) - 2008 JIS5012 5012JIS Coild Helical Spring For Press Dies - Type MJ
Nominal Diameter
D
10
×20 		10
×25 		10
×30 		10
×35 		10
×40 		10
×45 		10
×50 		10
×55 		10
×60 		12
×20 		12
×25 		12
×30 		12
×35 		12
×40 		12
×45
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
20 25 30 35 40 45 50 55 60 20 25 30 35 40 45
5 5 5 5 5 5 5 5 5 6 6 6 6 6 6
5.8 7.2 8.6 10.1 11.5 13 14.4 15.8 17.3 5.8 7.2 8.6 10.1 11.5 13
176.5 176.5 176.5 176.5 176.5 176.5 176.5 176.5 176.5 255 255 255 255 255 255
6.4 8 9.6 11.2 12.8 14.4 16 17.6 19.2 6.4 8 9.6 11.2 12.8 14.4
30.4 24.5 20.5 17.5 15.3 13.6 12.3 11.2 10.2 44 35.4 29.7 25.2 22.2 19.6
Nominal Diameter
D
12
×50 		12
×55 		12
×60 		12
×65 		12
×70 		14
×25 		14
×30 		14
×35 		14
×40 		14
×45 		14
×50 		14
×55 		14
×60 		14
×65 		14
×70
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
50 55 60 65 70 25 30 35 40 45 50 55 60 65 70
6 6 6 6 6 7 7 7 7 7 7 7 7 7 7
14.4 15.8 17.3 18.7 20.2 7.2 8.6 10.1 11.5 13 14.4 15.8 17.3 18.7 20.2
255 255 255 255 255 343 343 343 343 343 343 343 343 343 343
16 17.6 19.2 20.8 22.4 8 9.6 11.2 12.8 14.4 16 17.6 19.2 20.8 22.4
17.7 16.1 14.7 13.6 12.6 47.6 39.9 34 29.8 26.4 23.8 21.7 19.8 18.3 17
Nominal Diameter
D
14
×75 		14
×80 		16
×25 		16
×30 		16
×35 		16
×40 		16
×45 		16
×50 		16
×55 		16
×60 		16
×65 		16
×70 		16
×75 		16
×80 		16
×90
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
75 80 25 30 35 40 45 50 55 60 65 70 75 80 90
7 7 8 8 8 8 8 8 8 8 8 8 8 8 8
21.6 23 7.2 8.6 10.1 11.5 13 14.4 15.8 17.3 18.7 20.2 21.6 23 25.9
343 343 451 451 451 451 451 451 451 451 451 451 451 451 451
24 25.6 8 9.6 11.2 12.8 14.4 16 17.6 19.2 20.8 22.4 24 25.6 28.8
15.9 14.9 62.6 52.4 44.7 39.2 34.7 31.3 28.5 26.1 24.1 22.3 20.9 19.6 17.4
Nominal Diameter
D
18
×25 		18
×30 		18
×35 		18
×40 		18
×45 		18
×50 		18
×55 		18
×60 		18
×65 		18
×70 		18
×75 		18
×80 		18
×90 		18
×100 		20
×25
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
25 30 35 40 45 50 55 60 65 70 75 80 90 100 25
9 9 9 9 9 9 9 9 9 9 9 9 9 9 10
7.2 8.6 10.1 11.5 13 14.4 15.8 17.3 18.7 20.2 21.6 23 25.9 28.8 7.2
569 569 569 569 569 569 569 569 569 569 569 569 569 569 706
8 9.6 11.2 12.8 14.4 16 17.6 19.2 20.8 22.4 24 25.6 28.8 32 8
79 66.2 56.3 49.5 43.8 39.5 36 32.9 30.4 28.2 26.3 24.7 22 19.8 98.1
Nominal Diameter
D
20
×30 		20
×35 		20
×40 		20
×45 		20
×50 		20
×55 		20
×60 		20
×65 		20
×70 		20
×75 		20
×80 		20
×90 		20
×100 		22
×30 		22
×35
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
30 35 40 45 50 55 60 65 70 75 80 90 100 30 35
10 10 10 10 10 10 10 10 10 10 10 10 10 11 11
8.6 10.1 11.5 13 14.4 15.8 17.3 18.7 20.2 21.6 23 25.9 28.8 8.6 10.1
706 706 706 706 706 706 706 706 706 706 706 706 706 853 853
9.6 11.2 12.8 14.4 16 17.6 19.2 20.8 22.4 24 25.6 28.8 32 9.6 11.2
82.1 70 61.4 54.3 49 44.7 40.8 37.8 35 32.7 30.7 27.3 24.5 99.2 84.5
Nominal Diameter
D
22
×40 		22
×45 		22
×50 		22
×55 		22
×60 		22
×65 		22
×70 		22
×75 		22
×80 		22
×90 		22
×100 		22
×125 		25
×30 		25
×35 		25
×40
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
40 45 50 55 60 65 70 75 80 90 100 125 30 35 40
11 11 11 11 11 11 11 11 11 11 11 11 12.5 12.5 12.5
11.5 13 14.4 15.8 17.3 18.7 20.2 21.6 23 25.9 28.8 36 8.6 10.1 11.5
853 853 853 853 853 853 853 853 853 853 853 853 1098 1098 1098
12.8 14.4 16 17.6 19.2 20.8 22.4 24 25.6 28.8 32 40 9.6 11.2 12.8
74.2 65.6 59.2 54 49.3 45.6 42.2 39.5 37.1 32.9 29.6 23.7 127.7 108.7 95.5
Nominal Diameter
D
25
×45 		25
×50 		25
×55 		25
×60 		25
×65 		25
×70 		25
×75 		25
×80 		25
×90 		25
×100 		25
×125 		25
×150 		27
×35 		27
×40 		27
×45
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
45 50 55 60 65 70 75 80 90 100 125 150 35 40 45
12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 13.5 13.5 13.5
13 14.4 15.8 17.3 18.7 20.2 21.6 23 25.9 28.8 36 43.2 10.1 11.5 13
1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 1285 1285 1285
14.4 16 17.6 19.2 20.8 22.4 24 25.6 28.8 32 40 48 11.2 12.8 14.4
84.5 76.3 69.5 63.5 58.7 54.4 50.8 47.7 42.4 38.1 30.5 25.4 127.2 111.7 98.8
Nominal Diameter
D
27
×50 		27
×55 		27
×60 		27
×65 		27
×70 		27
×75 		27
×80 		27
×90 		27
×100 		27
×125 		27
×150 		30
×40 		30
×45 		30
×50 		30
×55
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
50 55 60 65 70 75 80 90 100 125 150 40 45 50 55
13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 15 15 15 15
14.4 15.8 17.3 18.7 20.2 21.6 23 25.9 28.8 36 43.2 11.5 13 14.4 15.8
1285 1285 1285 1285 1285 1285 1285 1285 1285 1285 1285 1579 1579 1579 1579
16 17.6 19.2 20.8 22.4 24 25.6 28.8 32 40 48 12.8 14.4 16 17.6
89.2 81.3 74.3 68.7 63.6 59.5 55.9 49.6 44.6 35.7 29.7 137.3 121.5 109.7 99.9
Nominal Diameter
D
30
×60 		30
×65 		30
×70 		30
×75 		30
×80 		30
×90 		30
×100 		30
×125 		30
×150 		30
×175 		35
×45 		35
×50 		35
×55 		35
×60 		35
×65
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
60 65 70 75 80 90 100 125 150 175 45 50 55 60 65
15 15 15 15 15 15 15 15 15 15 17.5 17.5 17.5 17.5 17.5
17.3 18.7 20.2 21.6 23 25.9 28.8 36 43.2 50.4 13 14.4 15.8 17.3 18.7
1579 1579 1579 1579 1579 1579 1579 1579 1579 1579 2160 2160 2160 2160 2160
19.2 20.8 22.4 24 25.6 28.8 32 40 48 56 14.4 16 17.6 19.2 20.8
91.3 84.4 78.2 73.1 68.7 61 54.8 43.9 36.6 31.3 166.2 150 136.7 124.9 115.5
Nominal Diameter
D
35
×70 		35
×75 		35
×80 		35
×90 		35
×100 		35
×125 		35
×150 		35
×175 		35
×200 		40
×50 		40
×55 		40
×60 		40
×65 		40
×70 		40
×75
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
70 75 80 90 100 125 150 175 200 50 55 60 65 70 75
17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 20 20 20 20 20 20
20.2 21.6 23 25.9 28.8 36 43.2 50.4 57.6 14.4 15.8 17.3 18.7 20.2 21.6
2160 2160 2160 2160 2160 2160 2160 2160 2160 2820 2820 2820 2820 2820 2820
22.4 24 25.6 28.8 32 40 48 56 64 16 17.6 19.2 20.8 22.4 24
106.9 100 93.9 83.4 75 60 50 42.9 37.5 195.8 178.5 163 150.8 139.6 130.6
Nominal Diameter
D
40
×80 		40
×90 		40
×100 		40
×125 		40
×150 		40
×175 		40
×200 		40
×250 		50
×60 		50
×65 		50
×70 		50
×75 		50
×80 		50
×90 		50
×100
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
80 90 100 125 150 175 200 250 60 65 70 75 80 90 100
20 20 20 20 20 20 20 20 25 25 25 25 25 25 25
23 25.9 28.8 36 43.2 50.4 57.6 72 17.3 18.7 20.2 21.6 23 25.9 28.8
2820 2820 2820 2820 2820 2820 2820 2820 4410 4410 4410 4410 4410 4410 4410
25.6 28.8 32 40 48 56 64 80 19.2 20.8 22.4 24 25.6 28.8 32
122.6 108.9 97.9 78.3 65.3 56 49 39.2 255 236 218 204 191.7 170.3 153.1
Nominal Diameter
D
50
×125 		50
×150 		50
×175 		50
×200 		50
×250 		50
×300 		60
×80 		60
×90 		60
×100 		60
×125 		60
×150 		60
×175 		60
×200 		60
×250 		60
×300
L0
D1
deflection, σ （L0×28.8%）
load（±10%，N）
Maximum operating deflection σ （L0×32%）
Spring rate(N/mm)
125 150 175 200 250 300 80 90 100 125 150 175 200 250 300
25 25 25 25 25 25 30 30 30 30 30 30 30 30 30
36 43.2 50.4 57.6 72 86.4 23 25.9 28.8 36 43.2 50.4 57.6 72 86.4
4410 4410 4410 4410 4410 4410 6350 6350 6350 6350 6350 6350 6350 6350 6350
40 48 56 64 80 96 25.6 28.8 32 40 48 56 64 80 96
122.5 102.1 87.5 76.6 61.3 51 276 245 220 176.4 147 126 110.2 88.2 73.5
Send Inquiry

Similar Standards

1 Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green) [ISO]
ISO 10243 (L) - 2019 		Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green)
2 Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter [DIN]
DIN 2098-1 - 1968 		Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter
3 Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow) [ISO]
ISO 10243 (EH) - 2019 		Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow)
4 Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red) [ISO]
ISO 10243 (H) - 2019 		Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red)
5 Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue) [ISO]
ISO 10243 (M) - 2019 		Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue)
6 Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter [DIN]
DIN 2098-2 - 1970 		Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter
7 Coild Helical Spring For Press Dies - Type L (color code: green) [JIS]
JIS B 5012 (L) - 2008 		Coild Helical Spring For Press Dies - Type L (color code: green)
8 Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow) [GB]
GB /T 36524 (EH) - 2018 		Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow)
9 Coild Helical Spring For Press Dies - Type B (color code: yellow) [JIS]
JIS B 5012 (B) - 2008 		Coild Helical Spring For Press Dies - Type B (color code: yellow)
10 Coild Helical Spring For Press Dies - Type BJ [JIS]
JIS B 5012 (BJ) - 2008 		Coild Helical Spring For Press Dies - Type BJ
11 Coild Helical Spring For Press Dies - Type LJ [JIS]
JIS B 5012 (LJ) - 2008 		Coild Helical Spring For Press Dies - Type LJ
12 Small Cylindrically Coiled Compression Spring, Stainless Steel [GB]
GB /T 1973.3 - 2005 		Small Cylindrically Coiled Compression Spring, Stainless Steel
13 Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red) [GB]
GB /T 36524 (H) - 2018 		Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red)
14 Small Cylindrically Coiled Compression Spring, Carbon Steel [GB]
GB /T 1973.3 - 2005 		Small Cylindrically Coiled Compression Spring, Carbon Steel
15 Cylindrical Coiled Compression Spring [GB]
GB /T 2089 - 2009 		Cylindrical Coiled Compression Spring
16 Coild Helical Spring For Press Dies - Type HJ [JIS]
JIS B 5012 (HJ) - 2008 		Coild Helical Spring For Press Dies - Type HJ
17 Coild Helical Spring For Press Dies - Type H (color code: red) [JIS]
JIS B 5012 (H) - 2008 		Coild Helical Spring For Press Dies - Type H (color code: red)
18 Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue) [GB]
GB /T 36524 (M) - 2018 		Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue)
19 Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green) [GB]
GB /T 36524 (L) - 2018 		Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green)
20 Coild Helical Spring For Press Dies - Type FJ [JIS]
JIS B 5012 (FJ) - 2008 		Coild Helical Spring For Press Dies - Type FJ
21 Coild Helical Spring For Press Dies - Type M (color code: blue) [JIS]
JIS B 5012 (M) - 2008 		Coild Helical Spring For Press Dies - Type M (color code: blue)