Click Specification

Helical springs made from round wire; cold coiled compression springs below 0.5 mm wire diameter

DIN 2098-2 - 1970

Display drawing:

Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs

Default density g/cm³

Nominal Diameter
d

0.1
× 1.2

0.1
× 1

0.1
× 0.8

0.1
× 0.63

0.1
× 0.5

0.12
× 1.6

0.12
× 1.2

0.12
× 1

0.12
× 0.8

0.12
× 0.63

0.16
× 2

0.16
× 1.6

D	Average coil diameter
P_n	Highest permissible spring force in kp
D₀	Mandrel diameter	max
D_h	Sleeve diameter	min
L₀	Number of spring turns:3.5	≈
	Number of spring turns:5.5	≈
	Number of spring turns:8.5	≈
	Federate in kp/mm	≈
	Number of spring turns:18.5	≈
L_n	Number of spring turns:3.5
	Number of spring turns:5.5
	Number of spring turns:8.5
	Number of spring turns:12.5
	Number of spring turns:18.5
f_n	Number of spring turns:3.5	≈
	Number of spring turns:5.5	≈
	Number of spring turns:8.5	≈
	Federate in kp/mm	≈
	Number of spring turns:18.5	≈
c	Number of spring turns:3.5	Federate in kp/mm
	Number of spring turns:5.5	Federate in kp/mm
	Number of spring turns:8.5	Federate in kp/mm
	Federate in kp/mm	Federate in kp/mm
	Number of spring turns:18.5	Federate in kp/mm
per 1000 units≈g	Number of spring turns:3.5
	Number of spring turns:5.5
	Number of spring turns:8.5
	Number of spring turns:12.5
	Number of spring turns:18.5

1.2	1	0.8	0.63	0.5	1.6	1.2	1	0.8	0.63	2	1.6
0.027	0.031	0.038	0.046	0.054	0.035	0.045	0.053	0.064	0.076	0.066	0.08
0.8	0.7	0.5	0.4	0.3	1.2	0.8	0.6	0.5	0.4	1.5	1.1
1.6	1.4	1.1	0.9	0.8	2.1	1.6	1.4	1.1	0.9	2.5	2.1
2.6	2	1.5	1.2	1	3.6	2.4	1.9	1.5	1.2	4.3	3.1
3.8	2.9	2.2	1.7	1.4	5.4	3.5	2.7	2.1	1.7	6.5	4.7
5.8	4.4	3.2	2.4	2	8.2	5.2	4	3.1	2.4	9.8	7
8.4	6.3	4.6	3.4	2.7	11.8	7.5	5.8	4.4	3.4	14.2	10
12.2	9.2	6.6	4.9	3.9	17.4	10.9	8.4	6.3	4.9	20.9	14.6
0.8	0.8	0.7	0.7	0.7	1	0.9	0.9	0.9	0.9	1.3	1.2
1.1	1	1	1	1	1.3	1.2	1.2	1.2	1.2	1.8	1.7
1.5	1.4	1.4	1.3	1.3	1.9	1.7	1.7	1.6	1.6	2.4	2.3
2.1	2	1.9	1.8	1.8	2.6	2.4	2.3	2.2	2.2	3.4	3.2
2.9	2.8	2.7	2.6	2.5	3.6	3.3	3.2	3.1	3	4.8	4.5
1.8	1.2	0.8	0.4	0.3	2.6	1.4	1	0.6	0.3	3	1.9
2.8	1.9	1.2	0.7	0.4	4.1	2.2	1.5	0.9	0.5	4.8	3
4.3	2.9	1.8	1.1	0.6	6.3	3.5	2.4	1.5	0.8	7.4	4.7
6.3	4.3	2.7	1.6	0.9	9.3	5.1	3.5	2.1	1.2	10.9	6.8
9.3	6.4	4	2.4	1.4	13.7	7.5	5.1	3.2	1.8	16.1	10.1
0.015	0.026	0.051	0.104	0.209	0.013	0.032	0.055	0.107	0.219	0.022	0.042
0.01	0.017	0.032	0.066	0.133	0.009	0.02	0.035	0.068	0.139	0.014	0.027
0.006	0.011	0.021	0.043	0.086	0.006	0.013	0.023	0.044	0.09	0.009	0.017
0.004	0.007	0.014	0.029	0.058	0.004	0.009	0.015	0.03	0.061	0.006	0.012
0.003	0.005	0.01	0.02	0.039	0.003	0.006	0.01	0.02	0.041	0.004	0.008
1.29	1.07	0.858	0.675	0.536	2.47	1.85	1.54	1.24	0.973	5.49	4.39
1.75	1.46	1.17	0.921	0.731	3.37	2.53	2.11	1.68	1.33	7.49	5.99
2.46	2.05	1.64	1.29	1.02	4.72	3.54	2.95	2.36	1.86	10.5	8.38
3.39	2.83	2.26	1.78	1.41	6.51	4.88	4.07	3.26	2.56	14.5	11.6
4.8	4	3.2	2.52	2	9.21	6.91	5.75	4.6	3.63	20.5	16.4

Nominal Diameter
d

0.16
× 1.2

0.16
× 1

0.16
× 0.8

0.2
× 2.5

0.2
× 2

0.2
× 1.6

0.2
× 1.2

0.2
× 1

0.25
× 3.2

0.25
× 2.5

0.25
× 2

0.25
× 1.6

D	Average coil diameter
P_n	Highest permissible spring force in kp
D₀	Mandrel diameter	max
D_h	Sleeve diameter	min
L₀	Number of spring turns:3.5	≈
	Number of spring turns:5.5	≈
	Number of spring turns:8.5	≈
	Federate in kp/mm	≈
	Number of spring turns:18.5	≈
L_n	Number of spring turns:3.5
	Number of spring turns:5.5
	Number of spring turns:8.5
	Number of spring turns:12.5
	Number of spring turns:18.5
f_n	Number of spring turns:3.5	≈
	Number of spring turns:5.5	≈
	Number of spring turns:8.5	≈
	Federate in kp/mm	≈
	Number of spring turns:18.5	≈
c	Number of spring turns:3.5	Federate in kp/mm
	Number of spring turns:5.5	Federate in kp/mm
	Number of spring turns:8.5	Federate in kp/mm
	Federate in kp/mm	Federate in kp/mm
	Number of spring turns:18.5	Federate in kp/mm
per 1000 units≈g	Number of spring turns:3.5
	Number of spring turns:5.5
	Number of spring turns:8.5
	Number of spring turns:12.5
	Number of spring turns:18.5

1.2	1	0.8	2.5	2	1.6	1.2	1	3.2	2.5	2	1.6
0.103	0.12	0.139	0.102	0.126	0.153	0.193	0.218	0.156	0.196	0.239	0.287
0.8	0.6	0.4	2	1.5	1.1	0.8	0.6	2.5	1.9	1.5	1.1
1.6	1.4	1.2	3.1	2.6	2.1	1.7	1.4	4	3.1	2.6	2.1
2.2	1.9	1.6	5.4	4	3	2.3	2	7.1	4.9	3.7	3
3.2	2.7	2.2	8.2	5.9	4.4	3.2	2.7	10.7	7.3	5.5	4.3
4.7	3.8	3.1	12.4	8.7	6.4	4.6	3.9	16.1	10.9	8	6.2
6.7	5.4	4.4	17.9	12.6	9.2	6.5	5.5	23.3	15.7	11.4	8.7
9.7	7.8	6.2	26.2	18.3	13.3	9.3	7.8	34.1	22.9	16.6	12.5
1.2	1.2	1.2	1.6	1.5	1.5	1.5	1.4	2	1.9	1.9	1.8
1.6	1.6	1.5	2.2	2.1	2	1.9	1.9	2.8	2.6	2.5	2.4
2.2	2.2	2.1	3.1	2.9	2.8	2.7	2.6	3.8	3.6	3.5	3.4
3	2.9	2.9	4.2	4	3.8	3.7	3.6	5.3	5	4.7	4.6
4.2	4.1	4	5.9	5.6	5.3	5.1	5	7.5	7	6.7	6.5
1	0.7	0.4	3.8	2.4	1.5	0.8	0.5	5	3	1.9	1.2
1.6	1.1	0.7	6	3.8	2.4	1.3	0.8	7.9	4.7	2.9	1.8
2.5	1.7	1	9.3	5.9	3.6	1.9	1.3	12.2	7.3	4.6	2.8
3.7	2.5	1.5	13.7	8.6	5.4	2.8	1.9	18	10.8	6.7	4.1
5.5	3.7	2.2	20.3	12.7	7.9	4.2	2.8	26.6	15.9	9.9	6.1
0.1	0.172	0.336	0.027	0.052	0.102	0.241	0.417	0.031	0.065	0.127	0.249
0.063	0.11	0.214	0.017	0.033	0.065	0.154	0.265	0.02	0.042	0.081	0.158
0.041	0.071	0.138	0.011	0.021	0.042	0.099	0.172	0.013	0.027	0.052	0.102
0.028	0.048	0.094	0.007	0.015	0.029	0.068	0.117	0.009	0.018	0.036	0.07
0.019	0.033	0.064	0.005	0.01	0.019	0.046	0.079	0.006	0.012	0.024	0.047
3.29	2.74	2.2	10.7	8.58	6.86	5.15	4.29	21.4	16.8	13.4	10.7
4.49	3.74	2.99	14.6	11.7	9.36	7.02	5.85	29.2	22.8	18.3	14.6
6.29	5.24	4.19	20.5	16.4	13.1	9.82	8.19	40.9	32	25.6	20.5
8.68	7.24	5.79	28.3	22.6	18.1	13.6	11.3	56.5	44.2	35.3	28.3
12.3	10.2	8.18	40	32	25.6	19.2	16	79.9	62.4	49.9	40

Nominal Diameter
d

0.25
× 1.2

0.32
× 4

0.32
× 3.2

0.32
× 2.5

0.32
× 2

0.32
× 1.6

0.4
× 5

0.4
× 4

0.4
× 3.2

0.4
× 2.5

0.4
× 2

D	Average coil diameter
P_n	Highest permissible spring force in kp
D₀	Mandrel diameter	max
D_h	Sleeve diameter	min
L₀	Number of spring turns:3.5	≈
	Number of spring turns:5.5	≈
	Number of spring turns:8.5	≈
	Federate in kp/mm	≈
	Number of spring turns:18.5	≈
L_n	Number of spring turns:3.5
	Number of spring turns:5.5
	Number of spring turns:8.5
	Number of spring turns:12.5
	Number of spring turns:18.5
f_n	Number of spring turns:3.5	≈
	Number of spring turns:5.5	≈
	Number of spring turns:8.5	≈
	Federate in kp/mm	≈
	Number of spring turns:18.5	≈
c	Number of spring turns:3.5	Federate in kp/mm
	Number of spring turns:5.5	Federate in kp/mm
	Number of spring turns:8.5	Federate in kp/mm
	Federate in kp/mm	Federate in kp/mm
	Number of spring turns:18.5	Federate in kp/mm
per 1000 units≈g	Number of spring turns:3.5
	Number of spring turns:5.5
	Number of spring turns:8.5
	Number of spring turns:12.5
	Number of spring turns:18.5

1.2	4	3.2	2.5	2	1.6	5	4	3.2	2.5	2
0.349	0.262	0.322	0.399	0.478	0.558	0.409	0.503	0.612	0.747	0.872
0.7	3.2	2.4	1.9	1.4	1	4.1	3.2	2.5	1.8	1.3
1.7	4.8	4	3.1	2.6	2.2	6	5	4	3.3	2.8
2.4	8.7	6.3	4.7	3.7	3.1	10.9	7.9	6	4.7	3.9
3.3	13.1	9.4	6.8	5.3	4.4	16.4	11.7	8.7	6.7	5.5
4.7	19.8	14	10	7.7	6.3	24.7	17.5	12.8	9.6	7.8
6.6	28.6	20.1	14.2	10.9	8.7	35.8	25.1	18.3	13.6	10.9
9.4	41.9	29.3	20.6	15.6	12.5	52.4	36.6	26.5	19.5	15.6
1.8	2.6	2.5	2.4	2.3	2.3	3.2	3.1	3	2.9	2..9
2.4	3.5	3.3	3.2	3.1	3.1	4.4	4.2	4	3.9	3.8
3.3	4.9	4.6	4.4	4.3	4.2	6.1	5.8	5.5	5.4	5.3
4.5	6.7	6.3	6.1	5.9	5.8	8.4	7.9	7.6	7.3	7.2
6.3	9.5	8.9	8.5	8.2	8.1	11.9	11.2	10.7	10.3	10.1
0.6	6.1	3.9	2.3	1.4	0.8	7.7	4.8	3	1.7	1
0.9	9.6	6.1	3.6	2.2	1.3	12	7.6	4.7	2.7	1.6
1.4	14.9	9.4	5.5	3.4	2	18.6	11.7	7.3	4.2	2.5
2.1	21.9	13.8	8.2	5	3	27.4	17.2	10.7	6.2	3.7
3.1	32.4	20.4	12.1	7.4	4.4	40.5	25.5	15.9	9.2	5.5
0.59	0.043	0.083	0.175	0.342	0.668	0.053	0.104	0.204	0.427	0.834
0.375	0.027	0.053	0.111	0.218	0.425	0.034	0.066	0.13	0.272	0.531
0.243	0.018	0.034	0.072	0.141	0.275	0.022	0.043	0.084	0.176	0.344
0.165	0.012	0.023	0.049	0.096	0.187	0.015	0.029	0.057	0.12	0.234
0.112	0.008	0.016	0.033	0.065	0.126	0.01	0.02	0.039	0.081	0.158
8.04	43.9	35.1	27.4	22	17.6	85.8	68.6	54.9	42.9	34.3
11	59.9	47.9	37.4	29.9	24	117	93.6	74.9	58.5	46.8
15.4	83.8	67.1	52.4	41.9	33.5	164	131	105	81.9	65.5
21.2	116	92.6	72.4	57.9	46.3	226	181	145	113	90.4
30	164	131	102	81.8	65.5	320	256	205	160	128

Send Inquiry

Similar Standards

1	[ISO] ISO 10243 (L) - 2019	Tools for pressing - Compression springs of light spring rate with rectangular section (color code: green)
2	[DIN] DIN 2098-1 - 1968	Helical springs made from round wire; cold coiled compression springs above and including 0.5 mm wire diameter
3	[ISO] ISO 10243 (EH) - 2019	Tools for pressing - Compression springs of extra strong spring rate with rectangular section (color code: yellow)
4	[ISO] ISO 10243 (H) - 2019	Tools for pressing - Compression springs of strong spring rate with rectangular section (color code: red)
5	[ISO] ISO 10243 (M) - 2019	Tools for pressing - Compression springs of medium spring rate with rectangular section (color code: blue)
6	[JIS] JIS B 5012 (L) - 2008	Coild Helical Spring For Press Dies - Type L (color code: green)
7	[GB] GB /T 36524 (EH) - 2018	Tools for pressing-Compression springs with rectangular - Extra strong spring rate (color code: yellow)
8	[JIS] JIS B 5012 (B) - 2008	Coild Helical Spring For Press Dies - Type B (color code: yellow)
9	[JIS] JIS B 5012 (BJ) - 2008	Coild Helical Spring For Press Dies - Type BJ
10	[JIS] JIS B 5012 (LJ) - 2008	Coild Helical Spring For Press Dies - Type LJ
11	[JIS] JIS B 5012 (MJ) - 2008	Coild Helical Spring For Press Dies - Type MJ
12	[GB] GB /T 1973.3 - 2005	Small Cylindrically Coiled Compression Spring, Stainless Steel
13	[GB] GB /T 36524 (H) - 2018	Tools for pressing-Compression springs with rectangular - Strong spring rate (color code: red)
14	[GB] GB /T 1973.3 - 2005	Small Cylindrically Coiled Compression Spring, Carbon Steel
15	[GB] GB /T 2089 - 2009	Cylindrical Coiled Compression Spring
16	[JIS] JIS B 5012 (HJ) - 2008	Coild Helical Spring For Press Dies - Type HJ
17	[JIS] JIS B 5012 (H) - 2008	Coild Helical Spring For Press Dies - Type H (color code: red)
18	[GB] GB /T 36524 (M) - 2018	Tools for pressing-Compression springs with rectangular - Medium spring rate (color code: blue)
19	[GB] GB /T 36524 (L) - 2018	Tools for pressing-Compression springs with rectangular - Light spring rate (color code: green)
20	[JIS] JIS B 5012 (FJ) - 2008	Coild Helical Spring For Press Dies - Type FJ
21	[JIS] JIS B 5012 (M) - 2008	Coild Helical Spring For Press Dies - Type M (color code: blue)