简体 | 繁體 | FastenerExpo |

Grooved Pins - 1/3 Length Centre Grooved

DIN EN ISO 8742 - 1998

Display drawing:

 *Models with different eras.

Nominal Length L Tips:seclect Nominal Length L and get .
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max
min
c
Minimum Double Shear,kN min
d1 tol.
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
+0.05 +0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.1 ±0.1 ±0.1 ±0.1
d1
- - - - - - - - - - - - -
①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,Material
a) Steel (St), hardness 125 HV30 to 245 HV30
b) Austenitic stainless steel A1 according to ISO 3506-1 hardness 210 HV30 to 280 HV30

Similar Standards

1 Metric grooved pins—half-length centre grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Metric grooved pins—half-length centre grooved
2 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997
Grooved Pins - Half-Length Centre Grooved
3 Grooved Pins-Full-Length Parallel Grooved, With Pilot [ISO]
ISO 8739 - 1997
Grooved Pins-Full-Length Parallel Grooved, With Pilot
4 Grooved Pins-Full-Length Parallel Grooved, With Chamfer [ISO]
ISO 8740 - 1997
Grooved Pins-Full-Length Parallel Grooved, With Chamfer
5 Metric grooved pins, full-length parallel grooved-metric series [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Metric grooved pins, full-length parallel grooved-metric series
6 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978
Grooved pin, full length parallel grooved with pilot
7 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved pins - Type F
8 Grooved Pin, Full Length Parallel Grooved With Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998
Grooved Pin, Full Length Parallel Grooved With Pilot
9 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type E
10 Grooved Pins -- Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998
Grooved Pins -- Half-Length Centre Grooved
11 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type H
12 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 2012
Grooved Pins, Half Length Grooved With Gorge
13 Grooved Pins. Full-Length Parallel Grooved,With Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998
Grooved Pins. Full-Length Parallel Grooved,With Chamfer
14 Grooved pins, Half length grooved with gorge [DIN]
DIN 1469 - 2011
Grooved pins, Half length grooved with gorge
15 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type E
16 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type G
17 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997
Grooved Pins-One-Third-Length Centre Grooved
18 Grooved pins metric series with half-length grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Grooved pins metric series with half-length grooved
19 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2020
Grooved pins - Type F
20 Grooved Pins, Full Length Parallel Grooved With Chamfer [DIN]
DIN 1473 - 1978
Grooved Pins, Full Length Parallel Grooved With Chamfer
21 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 1978
Grooved Pins, Half Length Grooved With Gorge
22 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type H
23 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997
Grooved Pins-Half-Length Centre Grooved
24 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992
Grooved Pins - Half-Length Centre Grooved
25 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type G
26 Metric grooved pins with one third length groove in the middle [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Metric grooved pins with one third length groove in the middle
27 Grooved pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978
Grooved pins - 1/3 Length Centre Grooved
28 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004
Grooved Pins - Half-Length Centre Grooved
29 Grooved Pin, Full Length Parallel Grooved With Chamfer [GB]
GB /T 13829.2 - 2004
Grooved Pin, Full Length Parallel Grooved With Chamfer
30 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992
Grooved Pins - Half-Length Centre Grooved
31 Grooved Pin, Full Length Parallel Grooved With Pilot [GB]
GB /T 13829.1 - 2004
Grooved Pin, Full Length Parallel Grooved With Pilot
32 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997
Grooved Pins. Half Length Centre Grooved
33 Grooved pin, full length parallel grooved with pilot [GB]
GB /T 13829.1 (A) - 1992
Grooved pin, full length parallel grooved with pilot
34 Grooved Pins. Full Length Paralled Grooved, With Chamfer [NF]
NF E 25-772 - 1997 (R2002)
Grooved Pins. Full Length Paralled Grooved, With Chamfer
35 Grooved pins-One-third-length centre grooved [GB]
GB /T 13829.3 - 2004
Grooved pins-One-third-length centre grooved
36 Grooved Pins-Full-Length Parallel Grooved, With Chamferw [GB]
GB /T 13829.1 (B) - 1992
Grooved Pins-Full-Length Parallel Grooved, With Chamferw
37 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002)
Grooved Pins. One-Third-Length Centre Grooved
38 Grooved Pins — Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997
Grooved Pins — Full-length Parallel Grooved, With Pilot
39 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992
Grooved Pins-One-Third-Length Centre Grooved
40 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004
Grooved Straight Pins - Type C
41 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004
Grooved Straight Pins - Type E
42 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004
Grooved Straight Pins - Type F