| 简体 | 繁體 |

Grooved Pins - Type E

ASME B 18.8.2 - 2000 (R2010)

Display drawing:

美标ASME B18.8.2 - 2000 (R2010) ASME18.8.2 Grooved Pins - Type E
Nominal Diameter
1/32 3/64 1/16 5/64 3/32 7/64 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2
Nominal Size
d max
min
c Nominal Size
R max
min
0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.1563 0.1875 0.2188 0.2500 0.3125 0.3750 0.4375 0.5000
0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.1563 0.1875 0.2188 0.2500 0.3125 0.3750 0.4375 0.5000
0.0297 0.0454 0.0610 0.0766 0.0923 0.1074 0.1230 0.1543 0.1855 0.2168 0.2480 0.3105 0.3730 0.4355 0.4980
- - 0.0065 0.0087 0.0091 0.0110 0.0130 0.0170 0.0180 0.0220 0.0260 0.0340 0.0390 0.0470 0.0520
- - 0.088 0.104 0.135 0.150 0.166 0.198 0.260 0.291 0.322 0.385 0.479 0.541 0.635
- - 0.068 0.084 0.115 0.130 0.146 0.178 0.240 0.271 0.302 0.365 0.459 0.521 0.615

Similar Standards

1 Grooved Pins-Full-Length Parallel Grooved, with Pilot [ISO]
ISO 8739 - 1997
Grooved Pins-Full-Length Parallel Grooved, with Pilot
2 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type H
3 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type G
4 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978
Grooved pin, full length parallel grooved with pilot
5 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997
Grooved Pins-One-Third-Length Centre Grooved
6 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2011
Grooved Pins, Half Length Grooved with Gorge
7 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997
Grooved Pins - Half-Length Centre Grooved
8 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type F
9 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992
Grooved Pins - Half-Length Centre Grooved
10 Grooved Pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type F
11 Grooved Pins. Full-Length Parallel Grooved, with Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998
Grooved Pins. Full-Length Parallel Grooved, with Chamfer
12 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type E
13 Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005)
Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]
14 Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005)
Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]
15 Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005)
Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]
16 Grooved Pins-Full-Length Parallel Grooved, with Chamfer [ISO]
ISO 8740 - 1997
Grooved Pins-Full-Length Parallel Grooved, with Chamfer
17 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type H
18 Grooved Pins - Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998
Grooved Pins - Half-Length Centre Grooved
19 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 2012
Grooved Pins, Half Length Grooved with Gorge
20 Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005)
Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]
21 Grooved Pin, Full Length Parallel Grooved with Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998
Grooved Pin, Full Length Parallel Grooved with Pilot
22 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998
Grooved Pins - 1/3 Length Centre Grooved
23 Grooved Pins, Full Length Parallel Grooved with Chamfer [DIN]
DIN 1473 - 1978
Grooved Pins, Full Length Parallel Grooved with Chamfer
24 Grooved Pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978
Grooved Pins - 1/3 Length Centre Grooved
25 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type G
26 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997
Grooved Pins-Half-Length Centre Grooved
27 Full-Length Parallel Grooved, with Chamfer [EN]
EN 28740 - 1992
Full-Length Parallel Grooved, with Chamfer
28 Grooved Pins, Half Length Grooved with Gorge [DIN]
DIN 1469 - 1978
Grooved Pins, Half Length Grooved with Gorge
29 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 (A) - 1992
Grooved Pin, Full Length Parallel Grooved with Pilot
30 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997
Grooved Pins. Half Length Centre Grooved
31 Grooved Pins - Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997
Grooved Pins - Full-length Parallel Grooved, With Pilot
32 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.3 - 2004
Grooved Pins-One-Third-Length Centre Grooved
33 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002)
Grooved Pins. One-Third-Length Centre Grooved
34 Grooved Pins - Half-length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992
Grooved Pins - Half-length Centre Grooved
35 Grooved Pins-one-third-length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992
Grooved Pins-one-third-length Centre Grooved
36 Grooved Pin, Full Length Parallel Grooved with Pilot [GB]
GB /T 13829.1 - 2004
Grooved Pin, Full Length Parallel Grooved with Pilot
37 Grooved Pins-full-length Parallel Grooved, with Chamferw [GB]
GB /T 13829.1 (B) - 1992
Grooved Pins-full-length Parallel Grooved, with Chamferw
38 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004
Grooved Pins - Half-Length Centre Grooved
39 Grooved Pins. Full Length Paralled Grooved, with Chamfer [NF]
NF E 25-772 - 1997 (R2002)
Grooved Pins. Full Length Paralled Grooved, with Chamfer
40 Grooved Pin, Full Length Parallel Grooved with Chamfer [GB]
GB /T 13829.2 - 2004
Grooved Pin, Full Length Parallel Grooved with Chamfer
41 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004
Grooved Straight Pins - Type F
42 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004
Grooved Straight Pins - Type E
43 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004
Grooved Straight Pins - Type C