About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Metric Hardened Beveled Washers

ASTM F 436M - 2019

Display drawing:

美标ASTM F436M - 2019 ASTM436M 436MASTM Metric Hardened Beveled Washers
Nominal Diameter
M12 M14 M16 M20 M22 M24 M27 M30 M36
d1 min
max
s min
max
t min
max
n ① min
14 16 18 22 24 26 30 33 39
14.4 16.4 18.4 22.5 24.5 26.5 30.5 33.6 39.6
43 43 43 43 43 43 56 56 56
45 45 45 45 45 45 58 58 58
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5
10.5 12.2 14 17.5 19.2 21 23.6 26.2 31.5
①,Washers may be clipped on one side not closer to the center of the washer than width n.
Send Inquiry

Similar Standards

1 Square Washers; Especially for Wood Constructions [DIN]
DIN 436 - 1990 		Square Washers; Especially for Wood Constructions
2 Square Taper Washers for U-sections [DIN]
DIN 434 - 2000 		Square Taper Washers for U-sections
3 Square Taper Washers for Use with I Sections [DIN]
DIN 435 - 2000 		Square Taper Washers for Use with I Sections
4 Square Washers; Especially for Wood Constructions [DIN]
DIN 436 - 2024 		Square Washers; Especially for Wood Constructions
5 Square Beveled Washers (Steel) [Type B] [ASME/ANSI]
ASME/ANSI B 18.23.1 - 1967 (R1975) 		Square Beveled Washers (Steel) [Type B]
6 Square Taper Washers for High-Strength Structural Bolting of Steel I Sections [DIN]
DIN 6917 - 1989 		Square Taper Washers for High-Strength Structural Bolting of Steel I Sections
7 Square Taper Washers for use with Channel Sections [DIN]
DIN 434 - 1990 		Square Taper Washers for use with Channel Sections
8 Square Taper Washers for use with 1 Sections [DIN]
DIN 435 - 1989 		Square Taper Washers for use with 1 Sections
9 Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F 436) [ASME]
ASME B 18.2.6 - 2010 		Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F 436)
10 Square Beveled Washers (Malleable Iron) [Type A] [ASME/ANSI]
ASME/ANSI B 18.23.1 - 1967 (R1975) 		Square Beveled Washers (Malleable Iron) [Type A]
11 Square Taper Washers for U-sections [DIN]
DIN 434 - 2024 		Square Taper Washers for U-sections
12 Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F436 / F436M) [ASME]
ASME B 18.2.6 - 2019 		Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
13 Square Taper Washers for High-strength Structual Bolting of Steel Channel Sections [DIN]
DIN 6918 - 1990 		Square Taper Washers for High-strength Structual Bolting of Steel Channel Sections
14 Square Taper Washers for I-Sections [DIN]
DIN 435 - 2024 		Square Taper Washers for I-Sections
15 Hardened Beveled Washers with Slope or Taper In Thichness 1:16 (ASTM F 436) [ASME]
ASME B 18.2.6 - 2006 		Hardened Beveled Washers with Slope or Taper In Thichness 1:16 (ASTM F 436)
16 Spherical Washers, Conical Seats - Type D [DIN]
DIN 6319 (D) - 2001 		Spherical Washers, Conical Seats - Type D
17 Metric Square Taper Washers [BS]
BS 4395-1 - 1969 		Metric Square Taper Washers
18 Square or D-shaped Taper Washers [Table 12] [BS]
BS 3410 (-12) - 1961 		Square or D-shaped Taper Washers [Table 12]
19 Square Washers [JIS]
JIS B 1256 (SQ) - 1978 		Square Washers
20 Channel Clamping Plates for UNP Section (Inclination 8％) [UNI]
UNI 6598 - 2002 		Channel Clamping Plates for UNP Section (Inclination 8％)
21 Square Black Washers with Round Holes [Table 11] [BS]
BS 3410 (-11) - 1961 		Square Black Washers with Round Holes [Table 11]
22 Square Taper Washers for I Section [GB]
GB 852 - 1988 		Square Taper Washers for I Section
23 Square Washers [Table JA.1.] [JIS]
JIS B 1256 (SQ) - 2008 		Square Washers [Table JA.1.]
24 Square Taper Washers for Slot Section [GB]
GB /T 853 - 1988 		Square Taper Washers for Slot Section
25 Square Hardened Beveled Washers [ASTM]
ASTM F 436 - 2010 		Square Hardened Beveled Washers
26 Hardened Beveled Washers [ASTM]
ASTM F 436 - 2011 		Hardened Beveled Washers
27 Square Washers [CNS]
CNS 155 - 1994 		Square Washers
28 Square Taper Washers with Double Slots for Channel [CNS]
CNS 156 - 1994 		Square Taper Washers with Double Slots for Channel
29 Square Taper Washers for 工 Steel with Single Slot [CNS]
CNS 157 - 1994 		Square Taper Washers for 工 Steel with Single Slot
30 Square Taper Washers with Single Slot for High Strength Bolts Connection for Steel Structure [CNS]
CNS 4646 - 1983 		Square Taper Washers with Single Slot for High Strength Bolts Connection for Steel Structure
31 Square Taper Washers for High Prestressed Channels [CNS]
CNS 4647 - 1983 		Square Taper Washers for High Prestressed Channels
32 Square Washers [KS]
KS B 1326 (T10) - 2021 		Square Washers
33 Square Washers [KS]
KS 1326 (T4) - 2009 		Square Washers
34 Hardened Beveled Washers, Inch Washers [ASTM]
ASTM F 436 - 2019 		Hardened Beveled Washers, Inch Washers
35 Square Taper Washers for use with Channels (6° Taper) Type B, and use with I-beams (8° Taper) Type C [IS]
IS 6649 (B / C) - 1985 		Square Taper Washers for use with Channels (6° Taper) Type B, and use with I-beams (8° Taper) Type C
36 Taper Washers for Channels ( ISMC ) [IS]
IS 5372 - 1975 (R2001) 		Taper Washers for Channels ( ISMC )