Click Specification

Hardened Beveled Washers, Inch Washers

ASTM F 436 - 2019

Display drawing:

For Nominal Thread Diameter

1/2

5/8

3/4

7/8

1-1/8

1-1/4

1-3/8

1-1/2

s ^①	min
s ^①	max
d₁	min
d₁	max
t	Mean Thickness
n ^②	Nominal Size

1.718	1.718	1.718	1.718	1.718	2.187	2.187	2.187	2.187
1.782	1.782	1.782	1.782	1.782	2.313	2.313	2.313	2.313
0.531	0.688	0.812	0.938	1.125	1.250	1.380	1.500	1.625
0.563	0.720	0.844	0.970	1.188	1.313	1.443	1.563	1.688
0.312	0.312	0.312	0.312	0.312	0.312	0.312	0.312	0.312
0.438	0.562	0.656	0.781	0.781	0.875	1.000	1.094	1.219

①,Rectangular beveled washers shall conform to the dimensions shown above, except that one side may be longer than that shown for the A dimension
②,Clipped edge “n” shall not be closer than 7/8 of the bolt diameter from the center of the washer.

Alternative history

ASTM F 436 - 2010 ASTM F 436 - 2011 ASTM F 436/436M - 2019

Send Inquiry

Similar Standards

1	[ASME] ASME B 18.2.6 - 2006	Hardened Beveled Washers With Slope Or Taper In Thichness 1:16 (ASTM F 436)
2	[DIN] DIN 435 - 1989	Square taper washers for use with 1 sections
3	[DIN] DIN 6917 - 1989	Square Taper Washers For High-Strength Structural Bolting Of Steel I Sections
4	[ASME] ASME B 18.2.6 - 2019	Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
5	[ASME/ANSI] ASME/ANSI B 18.23.1 - 1967 (R1975)	Square Beveled Washers (Steel) [Type B]
6	[DIN] DIN 434 - 2000	Square Taper Washers For U-sections
7	[ASME/ANSI] ASME/ANSI B 18.23.1 - 1967 (R1975)	Square Beveled Washers (Malleable Iron) [Type A]
8	[DIN] DIN 6918 - 1990	Square Taper Washers For High-strength Structual Bolting Of Steel Channel Sections
9	[ASME] ASME B 18.2.6 - 2010	Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F 436)
10	[DIN] DIN 435 - 2000	Square Taper Washers For Use With I Sections
11	[DIN] DIN 6319 (D) - 2001	Spherical Washers, Conical Seats - Type D
12	[DIN] DIN 436 - 1990	Square Washers; Especially For Wood Constructions
13	[DIN] DIN 434 - 1990	Square taper washers for use with channel sections
14	[BS] BS 3410 (-12) - 1961	Square or D-shaped Taper Washers [Table 12]
15	[UNI] UNI 6598 - 2002	Channel Clamping Plates For UNP Section (Inclination 8％)
16	[BS] BS 4395-1 - 1969	Metric Square Taper Washers
17	[JIS] JIS B 1256 (SQ) - 1978	Square Washers
18	[BS] BS 3410 (-11) - 1961	Square Black Washers With Round Holes [Table 11]
19	[GB] GB /T 853 - 1988	Square Taper Washers For Slot Section
20	[JIS] JIS B 1256 (SQ) - 2008	Square Washers [Table JA.1.]
21	[GB] GB 852 - 1988	Square Taper Washers For I Section
22	[IS] IS 6649 (B / C) - 1985	Square taper washers for use with channels (6° taper) Type B, and use with I-beams (8° taper) Type C
23	[IS] IS 5372 - 1975 (R2001)	Taper Washers For Channels ( ISMC )
24	[KS] KS 1326 (T4) - 2009	Square Washers
25	[KS] KS B 1326 (T10) - 2021	Square Washers
26	[CNS] CNS 4647 - 1983	Square Taper Washers For High Prestressed Channels
27	[CNS] CNS 4646 - 1983	Square Taper Washers With Single Slot For High Strength Bolts Connection For Steel Structure
28	[CNS] CNS 157 - 1994	Square Taper Washers For 工 Steel With Single Slot
29	[CNS] CNS 156 - 1994	Square Taper Washers With Double Slots For Channel
30	[CNS] CNS 155 - 1994	Square Washers
31	[ASTM] ASTM F 436M - 2019	Metric Hardened Beveled Washers
32	[ASTM] ASTM F 436 - 2010	Square hardened beveled washers
33	[ASTM] ASTM F 436 - 2011	Hardened Beveled Washers