简体 | 繁體 | FastenerExpo |

Metric Hardened Beveled Washers

ASTM F 436M - 2019

Display drawing:

美标ASTM F436M - 2019 ASTM436M 436MASTM Metric Hardened Beveled Washers
Nominal Diameter
M12 M14 M16 M20 M22 M24 M27 M30 M36
d1 min
max
s min
max
t min
max
n min
14 16 18 22 24 26 30 33 39
14.4 16.4 18.4 22.5 24.5 26.5 30.5 33.6 39.6
43 43 43 43 43 43 56 56 56
45 45 45 45 45 45 58 58 58
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5
10.5 12.2 14 17.5 19.2 21 23.6 26.2 31.5
①,Washers may be clipped on one side not closer to the center of the washer than width n.

Similar Standards

1 Hardened Beveled Washers With Slope Or Taper In Thichness 1:16  (ASTM F 436) [ASME]
ASME B 18.2.6 - 2006
Hardened Beveled Washers With Slope Or Taper In Thichness 1:16 (ASTM F 436)
2 Square Taper Washers For High-Strength Structural Bolting Of Steel I Sections [DIN]
DIN 6917 - 1989
Square Taper Washers For High-Strength Structural Bolting Of Steel I Sections
3 Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F436 / F436M) [ASME]
ASME B 18.2.6 - 2019
Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
4 Square Washers; Especially For Wood Constructions [DIN]
DIN 436 - 1990
Square Washers; Especially For Wood Constructions
5 Square Beveled Washers (Malleable Iron) [Type A] [ASME/ANSI]
ASME/ANSI B 18.23.1 - 1967 (R1975)
Square Beveled Washers (Malleable Iron) [Type A]
6 Square Taper Washers For Use With I Sections [DIN]
DIN 435 - 2000
Square Taper Washers For Use With I Sections
7 Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F 436) [ASME]
ASME B 18.2.6 - 2010
Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F 436)
8 Square Beveled Washers (Steel) [Type B] [ASME/ANSI]
ASME/ANSI B 18.23.1 - 1967 (R1975)
Square Beveled Washers (Steel) [Type B]
9 Square taper washers for use with channel sections [DIN]
DIN 434 - 1990
Square taper washers for use with channel sections
10 Square Taper Washers For High-strength Structual Bolting Of Steel Channel Sections [DIN]
DIN 6918 - 1990
Square Taper Washers For High-strength Structual Bolting Of Steel Channel Sections
11 Square Taper Washers For U-sections [DIN]
DIN 434 - 2000
Square Taper Washers For U-sections
12 Square taper washers for use with 1 sections [DIN]
DIN 435 - 1989
Square taper washers for use with 1 sections
13 Square Taper Washers For Slot Section [GB]
GB /T 853 - 1988
Square Taper Washers For Slot Section
14 Square Black Washers With Round Holes [Table 11] [BS]
BS 3410 (-11) - 1961
Square Black Washers With Round Holes [Table 11]
15 Square Washers [Table JA.1.] [JIS]
JIS B 1256 (SQ) - 2008
Square Washers [Table JA.1.]
16 Channel Clamping Plates For UNP Section (Inclination 8%) [UNI]
UNI 6598 - 2002
Channel Clamping Plates For UNP Section (Inclination 8%)
17 Square Washers [JIS]
JIS B 1256 (SQ) - 1978
Square Washers
18 Square Taper Washers For I Section [GB]
GB 852 - 1988
Square Taper Washers For I Section
19 Metric Square Taper Washers [BS]
BS 4395-1 - 1969
Metric Square Taper Washers
20 Square or D-shaped Taper Washers [Table 12] [BS]
BS 3410 (-12) - 1961
Square or D-shaped Taper Washers [Table 12]
21 Square hardened beveled washers [ASTM]
ASTM F 436 - 2010
Square hardened beveled washers
22 Hardened Beveled Washers [ASTM]
ASTM F 436 - 2011
Hardened Beveled Washers
23 Square Washers [CNS]
CNS 155 - 1994
Square Washers
24 Square Taper Washers With Double Slots For Channel [CNS]
CNS 156 - 1994
Square Taper Washers With Double Slots For Channel
25 Square Taper Washers For 工 Steel With Single Slot [CNS]
CNS 157 - 1994
Square Taper Washers For 工 Steel With Single Slot
26 Square Taper Washers With Single Slot For High Strength Bolts Connection For Steel Structure [CNS]
CNS 4646 - 1983
Square Taper Washers With Single Slot For High Strength Bolts Connection For Steel Structure
27 Square Taper Washers For High Prestressed Channels [CNS]
CNS 4647 - 1983
Square Taper Washers For High Prestressed Channels
28 Square Washers [KS]
KS B 1326 (T10) - 2021
Square Washers
29 Square Washers [KS]
KS 1326 (T4) - 2009
Square Washers
30 Hardened Beveled Washers, Inch Washers [ASTM]
ASTM F 436 - 2019
Hardened Beveled Washers, Inch Washers
31 Taper Washers For Channels ( ISMC ) [IS]
IS 5372 - 1975 (R2001)
Taper Washers For Channels ( ISMC )