About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Square Washers

KS 1326 (T4) - 2009

Display drawing:

韩标KS 1326 (T4) - 2009 KS1326 1326KS Square Washers
Size
6 8 10 12 (14) 16 (18) 20 (22) 24
d min=nominal size
max
s Small square flat pad max=nominal size
min
Large max=nominal size
min
h Small square flat pad Nominal Size
max
min
Large Nominal Size
max
min
6.6 9 11 14 16 18 20 22 24 26
7.2 9.6 11.7 14.7 16.7 18.7 20.8 22.8 24.8 26.8
17 23 28 35 40 45 52 56 64 68
15.9 21.7 26.7 33.4 38.4 43.4 50.1 54.1 62.1 66.1
20 26 32 40 44 52 55 62 68 72
18.7 24.7 30.4 38.4 42.4 50.1 53.1 60.1 66.1 70.1
1.2 1.6 1.6 2.3 3.2 3.2 4.5 4.5 4.5 6
1.4 1.8 1.8 2.6 3.6 3.6 5 5 5 6.7
1 1.4 1.4 2 2.8 2.8 4 4 4 5.3
2.3 2.3 2.3 3.2 3.2 4.5 4.5 6 6 6
2.6 2.6 2.6 3.6 3.6 5 5 6.7 6.7 6.7
2 2 2 2.8 2.8 4 4 5.3 5.3 5.3
Size
(27) 30 (33) 36 (39) 42 (45) 48 (52)
d min=nominal size
max
s Small square flat pad max=nominal size
min
Large max=nominal size
min
h Small square flat pad Nominal Size
max
min
Large Nominal Size
max
min
30 33 36 39 42 45 48 52 56
30.8 34 37 40 43 46.5 49.5 54 58
73 / / / / / / / /
71.1 / / / / / / / /
80 90 100 110 115 120 130 140 150
78.1 87.8 97.8 107.8 112.8 117.8 127.5 137.5 147.5
6 / / / / / / / /
6.7 / / / / / / / /
5.3 / / / / / / / /
6 6 8 8 8 9 9 12 12
6.7 6.7 8.7 8.7 8.7 10 10 13 13
5.3 5.3 7.3 7.3 7.3 8 8 11 11

Alternative history

KS 1326T4 - 2009 KS B 1326T10 - 2021
Send Inquiry

Similar Standards

1 Square Taper Washers for High-strength Structual Bolting of Steel Channel Sections [DIN]
DIN 6918 - 1990 		Square Taper Washers for High-strength Structual Bolting of Steel Channel Sections
2 Square Washers; Especially for Wood Constructions [DIN]
DIN 436 - 1990 		Square Washers; Especially for Wood Constructions
3 Square Taper Washers for I-Sections [DIN]
DIN 435 - 2024 		Square Taper Washers for I-Sections
4 Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F436 / F436M) [ASME]
ASME B 18.2.6 - 2019 		Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
5 Square Beveled Washers (Steel) [Type B] [ASME/ANSI]
ASME/ANSI B 18.23.1 - 1967 (R1975) 		Square Beveled Washers (Steel) [Type B]
6 Square Taper Washers for use with Channel Sections [DIN]
DIN 434 - 1990 		Square Taper Washers for use with Channel Sections
7 Square Taper Washers for U-sections [DIN]
DIN 434 - 2024 		Square Taper Washers for U-sections
8 Square Washers; Especially for Wood Constructions [DIN]
DIN 436 - 2024 		Square Washers; Especially for Wood Constructions
9 Square Taper Washers for Use with I Sections [DIN]
DIN 435 - 2000 		Square Taper Washers for Use with I Sections
10 Hardened Beveled Washers with Slope or Taper In Thichness 1:16 (ASTM F 436) [ASME]
ASME B 18.2.6 - 2006 		Hardened Beveled Washers with Slope or Taper In Thichness 1:16 (ASTM F 436)
11 Square Beveled Washers (Malleable Iron) [Type A] [ASME/ANSI]
ASME/ANSI B 18.23.1 - 1967 (R1975) 		Square Beveled Washers (Malleable Iron) [Type A]
12 Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F 436) [ASME]
ASME B 18.2.6 - 2010 		Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F 436)
13 Square Taper Washers for High-Strength Structural Bolting of Steel I Sections [DIN]
DIN 6917 - 1989 		Square Taper Washers for High-Strength Structural Bolting of Steel I Sections
14 Spherical Washers, Conical Seats - Type D [DIN]
DIN 6319 (D) - 2001 		Spherical Washers, Conical Seats - Type D
15 Square Taper Washers for U-sections [DIN]
DIN 434 - 2000 		Square Taper Washers for U-sections
16 Square Taper Washers for use with 1 Sections [DIN]
DIN 435 - 1989 		Square Taper Washers for use with 1 Sections
17 Square Washers [Table JA.1.] [JIS]
JIS B 1256 (SQ) - 2008 		Square Washers [Table JA.1.]
18 Square Black Washers with Round Holes [Table 11] [BS]
BS 3410 (-11) - 1961 		Square Black Washers with Round Holes [Table 11]
19 Metric Square Taper Washers [BS]
BS 4395-1 - 1969 		Metric Square Taper Washers
20 Square Taper Washers for I Section [GB]
GB 852 - 1988 		Square Taper Washers for I Section
21 Square or D-shaped Taper Washers [Table 12] [BS]
BS 3410 (-12) - 1961 		Square or D-shaped Taper Washers [Table 12]
22 Channel Clamping Plates for UNP Section (Inclination 8％) [UNI]
UNI 6598 - 2002 		Channel Clamping Plates for UNP Section (Inclination 8％)
23 Square Washers [JIS]
JIS B 1256 (SQ) - 1978 		Square Washers
24 Square Taper Washers for Slot Section [GB]
GB /T 853 - 1988 		Square Taper Washers for Slot Section
25 Square Hardened Beveled Washers [ASTM]
ASTM F 436 - 2010 		Square Hardened Beveled Washers
26 Hardened Beveled Washers [ASTM]
ASTM F 436 - 2011 		Hardened Beveled Washers
27 Metric Hardened Beveled Washers [ASTM]
ASTM F 436M - 2019 		Metric Hardened Beveled Washers
28 Square Washers [CNS]
CNS 155 - 1994 		Square Washers
29 Square Taper Washers with Double Slots for Channel [CNS]
CNS 156 - 1994 		Square Taper Washers with Double Slots for Channel
30 Square Taper Washers for 工 Steel with Single Slot [CNS]
CNS 157 - 1994 		Square Taper Washers for 工 Steel with Single Slot
31 Square Taper Washers with Single Slot for High Strength Bolts Connection for Steel Structure [CNS]
CNS 4646 - 1983 		Square Taper Washers with Single Slot for High Strength Bolts Connection for Steel Structure
32 Square Taper Washers for High Prestressed Channels [CNS]
CNS 4647 - 1983 		Square Taper Washers for High Prestressed Channels
33 Square Washers [KS]
KS B 1326 (T10) - 2021 		Square Washers
34 Hardened Beveled Washers, Inch Washers [ASTM]
ASTM F 436 - 2019 		Hardened Beveled Washers, Inch Washers
35 Square Taper Washers for use with Channels (6° Taper) Type B, and use with I-beams (8° Taper) Type C [IS]
IS 6649 (B / C) - 1985 		Square Taper Washers for use with Channels (6° Taper) Type B, and use with I-beams (8° Taper) Type C
36 Taper Washers for Channels ( ISMC ) [IS]
IS 5372 - 1975 (R2001) 		Taper Washers for Channels ( ISMC )