Click Specification

Hardened Beveled Washers

ASTM F 436 - 2011

Display drawing:

For Nominal Thread Diameter

1/2

5/8

3/4

7/8

1-1/8

1-1/4

1-3/8

1-1/2

d₁	Nominal Size
s ^①	min
t	Mean Thickness
n ^②	Nominal Size

17/32	11/16	13/16	15/16	1-1/8	1-1/4	1-3/8	1-1/2	1-5/8
1-3/4	1-3/4	1-3/4	1-3/4	1-3/4	2-1/4	2-1/4	2-1/4	2-1/4
5/16	5/16	5/16	5/16	5/16	5/16	5/16	5/16	5/16
7/16	9/16	21/32	25/32	7/8	1	1-3/32	1-7/32	1-5/16

①,Rectangular beveled washers shall conform to the dimensions shown above, except that one side may be longer than that shown for the A dimension
②,Clipped edge “n” shall not be closer than 7/8 of the bolt diameter from the center of the washer.

Alternative history

ASTM F 436 - 2010 ASTM F 436 - 2011 ASTM F 436/436M - 2019

Send Inquiry

Similar Standards

1	[ASME/ANSI] ASME/ANSI B 18.23.1 - 1967 (R1975)	Square Beveled Washers (Malleable Iron) [Type A]
2	[DIN] DIN 6319 (D) - 2001	Spherical Washers, Conical Seats - Type D
3	[ASME/ANSI] ASME/ANSI B 18.23.1 - 1967 (R1975)	Square Beveled Washers (Steel) [Type B]
4	[DIN] DIN 6918 - 1990	Square Taper Washers For High-strength Structual Bolting Of Steel Channel Sections
5	[ASME] ASME B 18.2.6 - 2006	Hardened Beveled Washers With Slope Or Taper In Thichness 1:16 (ASTM F 436)
6	[DIN] DIN 435 - 2000	Square Taper Washers For Use With I Sections
7	[DIN] DIN 6917 - 1989	Square Taper Washers For High-Strength Structural Bolting Of Steel I Sections
8	[DIN] DIN 435 - 1989	Square taper washers for use with 1 sections
9	[DIN] DIN 434 - 1990	Square taper washers for use with channel sections
10	[ASME] ASME B 18.2.6 - 2010	Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F 436)
11	[DIN] DIN 434 - 2000	Square Taper Washers For U-sections
12	[ASME] ASME B 18.2.6 - 2019	Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
13	[DIN] DIN 436 - 1990	Square Washers; Especially for Wood Constructions
14	[JIS] JIS B 1256 (SQ) - 1978	Square Washers
15	[JIS] JIS B 1256 (SQ) - 2008	Square Washers [Table JA.1.]
16	[UNI] UNI 6598 - 2002	Channel Clamping Plates For UNP Section (Inclination 8％)
17	[GB] GB 852 - 1988	Square Taper Washers For I Section
18	[BS] BS 4395-1 - 1969	Metric Square Taper Washers
19	[GB] GB /T 853 - 1988	Square Taper Washers For Slot Section
20	[BS] BS 3410 (-12) - 1961	Square or D-shaped Taper Washers [Table 12]
21	[BS] BS 3410 (-11) - 1961	Square Black Washers With Round Holes [Table 11]
22	[IS] IS 6649 (B / C) - 1985	Square taper washers for use with channels (6° taper) Type B, and use with I-beams (8° taper) Type C
23	[IS] IS 5372 - 1975 (R2001)	Taper Washers For Channels ( ISMC )
24	[KS] KS 1326 (T4) - 2009	Square Washers
25	[KS] KS B 1326 (T10) - 2021	Square Washers
26	[CNS] CNS 4647 - 1983	Square Taper Washers For High Prestressed Channels
27	[CNS] CNS 4646 - 1983	Square Taper Washers With Single Slot For High Strength Bolts Connection For Steel Structure
28	[CNS] CNS 157 - 1994	Square Taper Washers For 工 Steel With Single Slot
29	[CNS] CNS 156 - 1994	Square Taper Washers With Double Slots For Channel
30	[CNS] CNS 155 - 1994	Square Washers
31	[ASTM] ASTM F 436M - 2019	Metric Hardened Beveled Washers
32	[ASTM] ASTM F 436 - 2010	Square hardened beveled washers
33	[ASTM] ASTM F 436 - 2019	Hardened Beveled Washers, Inch Washers