简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Grooved Pins-Full-Length Parallel Grooved, With Pilot

ISO 8739 - 1997

Display drawing:

国际ISO 8739 - 1997 ISO8739 8739ISO Grooved Pins-Full-Length Parallel Grooved, With Pilot
Download CAD Model
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max
min
d2 min
max
c min
max
a ≈
Minimum Double Shear,kN
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
1 1 1.5 1.5 2 2 3 3 4 4 4 6 6
2 2 2.5 2.5 3 3 4 4 5 5 5 7 7
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
①,The grooving angle "α" applies only to grooved pins made from steel (α≈70°). The grooving angle may be modified depending on resilience of material.
Send Inquiry

Similar Standards

1 Grooved pins metric series with half-length grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Grooved pins metric series with half-length grooved
2 Grooved Pin, Full Length Parallel Grooved With Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved With Pilot
3 Metric grooved pins, full-length parallel grooved-metric series [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins, full-length parallel grooved-metric series
4 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
5 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
6 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved With Gorge
7 Grooved Pins-Full-Length Parallel Grooved, With Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, With Chamfer
8 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved pins - Type F
9 Metric grooved pins with one third length groove in the middle [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins with one third length groove in the middle
10 Grooved pins, Half length grooved with gorge [DIN]
DIN 1469 - 2011 		Grooved pins, Half length grooved with gorge
11 Grooved Pins. Full-Length Parallel Grooved,With Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved,With Chamfer
12 Metric grooved pins—half-length centre grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins—half-length centre grooved
13 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved pins - Type F
14 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
15 Grooved pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved pins - 1/3 Length Centre Grooved
16 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
17 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
18 Full-length Parallel Grooved, With Chamfer [EN]
EN 28740 - 1992 		Full-length Parallel Grooved, With Chamfer
19 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved With Gorge
20 Grooved Pins, Full Length Parallel Grooved With Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved With Chamfer
21 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
22 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
23 Grooved Pins -- Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins -- Half-Length Centre Grooved
24 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
25 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
26 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
27 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
28 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
29 Grooved Pin, Full Length Parallel Grooved With Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved With Chamfer
30 Grooved pin, full length parallel grooved with pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved pin, full length parallel grooved with pilot
31 Grooved Pins-Full-Length Parallel Grooved, With Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-Full-Length Parallel Grooved, With Chamferw
32 Grooved Pins — Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins — Full-length Parallel Grooved, With Pilot
33 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-Length Centre Grooved
34 Grooved Pin, Full Length Parallel Grooved With Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved With Pilot
35 Grooved Pins. Full Length Paralled Grooved, With Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, With Chamfer
36 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
37 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-One-Third-Length Centre Grooved
38 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
39 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
40 Grooved pins-One-third-length centre grooved [GB]
GB /T 13829.3 - 2004 		Grooved pins-One-third-length centre grooved
41 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
42 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
43 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F