Click Specification

Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring seal - Part1: Port with O-ring sea in truncated housing

ISO 11926-1 - 1995

Display drawing:

Thread Size
d

3/8
-24 UNF-2B

7/16
-20 UNF-2B

1/2
-20 UNF-2B

9/16
-18 UNF-2B

3/4
-16 UNF-2B

7/8
-14 UNF-2B

1-1/16
-12 UN-2B

1-3/16
-12 UN-2B

1-5/16
-12 UN-2B

1-5/8
-12 UN-2B

1-7/8
-12 UN-2B

2-1/2
-12 UN-2B

d₂	min
d₃	Ref.
d₄	min
d₅	Nominal Size
	max
	min
L₁	min=nominal size
L₁	max
L₂	min
L₃	max
L₄	min
z	Nominal Size
	max
	min
R	max

19	21	23	25	30	34	41	45	49	58	65	88
3.5	4.5	6	7.5	10	12.5	16	18	21	27	33	45
13	15	16	18	22	26	32	35	38	48	54	70
10.75	12.45	14.05	15.7	20.65	24	29.2	32.4	35.55	43.55	49.9	65.75
10.8	12.5	14.1	15.75	20.7	24.05	29.25	32.45	35.6	43.6	49.95	65.8
10.7	12.4	14	15.65	20.6	23.95	29.15	32.35	35.5	43.5	49.85	65.7
1.9	2.4	2.4	2.5	2.5	2.5	3.3	3.3	3.3	3.3	3.3	3.3
2.3	2.8	2.8	2.9	2.9	2.9	3.7	3.7	3.7	3.7	3.7	3.7
12	14	14	15.5	17.5	20	23	23	23	23	23	23
1.6	1.6	1.6	1.6	2.4	2.4	2.4	2.4	3.2	3.2	3.2	3.2
10	11.5	11.5	12.7	14.3	16.7	19	19	19	19	19	19
12°	12°	12°	12°	15°	15°	15°	15°	15°	15°	15°	15°
13°	13°	13°	13°	16°	16°	16°	16°	16°	16°	16°	16°
11°	11°	11°	11°	14°	14°	14°	14°	14°	14°	14°	14°
0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4

Send Inquiry

Similar Standards

1	[DIN] DIN 988 (P/PS) - 1990	Shim Rings View Suppliers
2	[DIN] DIN 7603 (A) - 2001	Sealing Rings - Form A View Suppliers
3	[DIN] DIN 7603 (D) - 2001	Sealing Rings - Form D
4	[ISO] ISO 3601-1 (A) - 2012	Fluid Power Systems — O-rings for Aerospace Applications
5	[ISO] ISO 8434-1 (F) - 2018	O-ring
6	[DIN] DIN 988 (S/SS) - 1990	Supporting Rings
7	[DIN] DIN 3869 - 1994	Profil Sealing Rings
8	[DIN] DIN 470 - 2008	Sealing Washers
9	[DIN] DIN 470 - 2011	Sealing Washers
10	[DIN] DIN 3770 - 1986	Sealing Rings (O-rings) with Special a Accuracy, Made of Elastomeric
11	[DIN ISO] DIN ISO 3601-1 - 2013	Fluid Power Systems — O-rings for Aerospace Applications
12	[DIN] DIN 443 - 2017	Sealing Push-In Caps
13	[ASME] ASME B 16.20 - 2012	Metallic Gaskets for Pipe Flanges ( Ring-Joint )
14	[ISO] ISO 3601-1 - 2012	Fluid Power Systems — O-rings for General Industrial Applications
15	[DIN] DIN 89347 - 2008	Washers for Glands for Electrical Cables and Insulated Wires
16	[DIN] DIN 3760 - 1996	Rotary Shaft Lip Seals
17	[DIN ISO] DIN ISO 3601-1 - 2013	Fluid Power Systems — O-rings for General Industrial Applications
18	[ASME] ASME B 16.20 - 2012	Type RX Ring Gasket
19	[DIN] DIN 86039 - 2000	Ships and Marine Technology - Flat Gaskets for Flange Connections Extra Light Duty on 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
20	[DIN] DIN 3771 (-1) - 1993	O-rings
21	[DIN] DIN 7603 (C) - 2001	Sealing Rings - Form C
22	[DIN] DIN 443 - 1970	Sealing Push-in Caps
23	[DIN] DIN 443 - 2011	Sealing Push-in Caps
24	[JIS] JIS B 2401-1 (F) - 2012	O-Rings for General Industrial Appilcations
25	[GB] GB /T 9128 - 2003	Metallic Ring-joint Gaskets for use with Steel Pipe Flanges
26	[GB] GB /T 10708.3 - 2000	Wiper Riitg (Scraper) - Type A
27	[NF] NF E 29-584 - 1979	Sealing Washers
28	[GB] GB /T 3452.1 (A) - 2005	Fluid Power Systems — O-rings — A Seriers
29	[GB] GB 3762 - 1983	Bite Type Tube Fittings - Tipping Washer
30	[GB] GB /T 13871.1 - 2007	Rotary Shaft Lip Type Seals Incorporating Elastomeric Sealing Elements
31	[GB] GB 1235 - 1976	O-rings, Inside Diameters, Cross-Sections, Tolerances and Size Identification Code
32	[GB] GB /T 10708.1 - 2000	Rubber Seals on One-way
33	[GB] GB /T 3452.1 (G) - 2005	Fluid Power Systems — O-rings — G Seriers
34	[WS] WS 9260	Sealing Washers with EPDM
35	[SAE] SAE AS 568 - 2020	Aerospace Size Standard for O-rings
36	[GOST] GOST 28919 - 1991	Flange Connections of Wellhead Equipment - Gasket - П
37	[GOST] GOST 28919 - 1991	Flange Connections of Wellhead Equipment - Gasket - БX
38	[Others] NB/T 47024 - 2012	Nonmetallic Gaskets
39	[SAE] SAE J 1926-1 - 2016	Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 1: Threaded Port with O-Ring Seal in Truncated Housing