Click Specification

O-ring

ISO 8434-1 (F) - 2018

Display drawing:

Tube outer diameter

Series
d₁	Nominal Size
	max
	min
d	Nominal Size
	max
	min

L	L	L	L	L	L	L	L	L	L
4.5	6.5	8	10	12	15	20	26	32	38
4.64	6.64	8.16	10.16	12.18	15.18	20.22	26.22	32.31	38.31
4.36	6.36	7.84	9.84	11.82	14.82	19.78	25.78	31.69	37.69
1.5	1.5	1.5	1.5	2	2	2	2	2.5	2.5
1.58	1.58	1.58	1.58	2.09	2.09	2.09	2.09	2.59	2.59
1.42	1.42	1.42	1.42	1.91	1.91	1.91	1.91	2.41	2.41

Tube outer diameter

Series
d₁	Nominal Size
	max
	min
d	Nominal Size
	max
	min

S	S	S	S	S	S	S	S	S
4.5	6.5	8	10	13	16.3	20.3	25.3	33.3
4.64	6.64	8.16	10.16	13.18	16.48	20.52	25.52	33.61
4.36	6.36	7.84	9.84	12.82	16.12	20.08	25.08	32.99
1.5	1.5	1.5	1.5	2	2.4	2.4	2.4	2.4
1.58	1.58	1.58	1.58	2.09	2.49	2.49	2.49	2.49
1.42	1.42	1.42	1.42	1.91	2.31	2.31	2.31	2.31

Send Inquiry

Similar Standards

1	[DIN] DIN 7603 (A) - 2001	Sealing Rings - Form A View Suppliers
2	[DIN] DIN 86039 - 2000	Ships and Marine Technology - Flat Gaskets for Flange Connections Extra Light Duty on 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
3	[DIN] DIN 3770 - 1986	Sealing Rings (O-rings) with Special a Accuracy, Made of Elastomeric
4	[ASME] ASME B 16.20 - 2012	Metallic Gaskets for Pipe Flanges ( Ring-Joint )
5	[DIN] DIN 3771 (-1) - 1993	O-rings
6	[DIN] DIN 3869 - 1994	Profil Sealing Rings
7	[DIN] DIN 443 - 2017	Sealing Push-In Caps
8	[DIN] DIN 89347 - 2008	Washers for Glands for Electrical Cables and Insulated Wires
9	[ISO] ISO 2852 (T3) - 1993	Stainless Steel Clamp Pipe Couplings for the Food Industry - Gasket
10	[DIN] DIN 7603 (D) - 2001	Sealing Rings - Form D
11	[ISO] ISO 11926-1 - 1995	Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring seal - Part1: Port with O-ring sea in truncated housing
12	[DIN] DIN 988 (S/SS) - 1990	Supporting Rings
13	[DIN ISO] DIN ISO 3601-1 - 2013	Fluid Power Systems — O-rings for General Industrial Applications
14	[DIN] DIN 7603 (C) - 2001	Sealing Rings - Form C
15	[ISO] ISO 3601-1 (A) - 2012	Fluid Power Systems — O-rings for Aerospace Applications
16	[ISO] ISO 3601-1 - 2012	Fluid Power Systems — O-rings for General Industrial Applications
17	[ASME] ASME B 16.20 - 2012	Type RX Ring Gasket
18	[DIN] DIN 470 - 2008	Sealing Washers
19	[DIN] DIN 3760 - 1996	Rotary Shaft Lip Seals
20	[DIN] DIN 443 - 2011	Sealing Push-in Caps
21	[DIN ISO] DIN ISO 3601-1 - 2013	Fluid Power Systems — O-rings for Aerospace Applications
22	[DIN] DIN 470 - 2011	Sealing Washers
23	[DIN] DIN 988 (P/PS) - 1990	Shim Rings
24	[DIN] DIN 443 - 1970	Sealing Push-in Caps
25	[NF] NF E 29-584 - 1979	Sealing Washers
26	[GB] GB 1235 - 1976	O-rings, Inside Diameters, Cross-Sections, Tolerances and Size Identification Code
27	[GB] GB /T 10708.1 - 2000	Rubber Seals on One-way
28	[GB] GB /T 10708.3 - 2000	Wiper Riitg (Scraper) - Type A
29	[JIS] JIS B 2401-1 (F) - 2012	O-Rings for General Industrial Appilcations
30	[GB] GB /T 13871.1 - 2007	Rotary Shaft Lip Type Seals Incorporating Elastomeric Sealing Elements
31	[GB] GB /T 3452.1 (G) - 2005	Fluid Power Systems — O-rings — G Seriers
32	[GB] GB /T 9128 - 2003	Metallic Ring-joint Gaskets for use with Steel Pipe Flanges
33	[GB] GB /T 3452.1 (A) - 2005	Fluid Power Systems — O-rings — A Seriers
34	[GB] GB 3762 - 1983	Bite Type Tube Fittings - Tipping Washer
35	[GOST] GOST 28919 - 1991	Flange Connections of Wellhead Equipment - Gasket - П
36	[GOST] GOST 28919 - 1991	Flange Connections of Wellhead Equipment - Gasket - БX
37	[SAE] SAE AS 1895 (/23) - 1996 (R2007)	High Conformance Seal, Type I & II Standard And Low Profile
38	[SAE] SAE AS 568 - 2020	Aerospace Size Standard for O-rings
39	[Others] NB/T 47024 - 2012	Nonmetallic Gaskets
40	[WS] WS 9260	Sealing Washers with EPDM
41	[SAE] SAE J 1926-1 - 2016	Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 1: Threaded Port with O-Ring Seal in Truncated Housing