About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:inch

Dimensions for Tap-End Studs (1.5d Engagement) (Inch Series)（A193 / A320 / A437 / A453 / A540 / A1014）[Table 3]

ASME B 18.31.2 - 2014

Display drawing:

美标ASME B18.31.2 - 2014 ASME18.31.2 18.31 Dimensions for Tap-End Studs (1.5d Engagement) (Inch Series)（A193 / A320 / A437 / A453 / A540 / A1014）[Table 3]
Thread Size
d
1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8
d
b1 Nominal Size
min
max
u max UNC，NC-5
UNF
8UN
b min L≤10
10＜L≤16
L＞16
ds Full body,max
Full body,min UNC
UNF
8UN
ds1 Reduced body,max UNC
UNF
8UN
Reduced body,min UNC
UNF
8UN
0.2500 0.3125 0.3750 0.4375 0.5000 0.5625 0.6250 0.7500 0.8750 1.0000 1.1250 1.2500 1.3750
0.375 0.469 0.563 0.656 0.750 0.844 0.938 1.125 1.313 1.500 1.688 1.875 2.063
0.350 0.440 0.532 0.620 0.708 0.802 0.892 1.075 1.258 1.438 1.625 1.813 2.000
0.400 0.498 0.594 0.692 0.792 0.896 0.983 1.175 1.368 1.562 1.750 1.938 2.125
0.100 0.111 0.125 0.143 0.154 0.167 0.182 0.200 0.222 0.250 0.286 0.286 0.333
0.071 0.083 0.083 0.100 0.100 0.111 0.111 0.125 0.143 0.167 0.167 0.167 0.167
- - - - - - - - - - 0.250 0.250 0.250
0.750 0.875 1.000 1.125 1.250 1.375 1.500 1.750 2.000 2.250 2.500 2.750 3.000
1.000 1.125 1.250 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 3.000 3.250
1.500 1.625 1.750 1.875 2.000 2.125 2.250 2.500 2.750 3.000 3.250 3.500 3.750
0.2500 0.3125 0.3750 0.4375 0.5000 0.5625 0.6250 0.7500 0.8750 1.0000 1.1250 1.2500 1.3750
0.241 0.303 0.364 0.426 0.488 0.550 0.611 0.735 0.859 0.983 1.106 1.231 1.354
0.243 0.304 0.367 0.428 0.491 0.552 0.615 0.739 0.863 0.987 1.112 1.237 1.362
- - - - - - - - - - 1.108 1.233 1.358
0.241 0.303 0.364 0.426 0.488 0.550 0.611 0.735 0.859 0.983 1.106 1.231 1.354
0.243 0.304 0.367 0.428 0.491 0.552 0.615 0.739 0.863 0.987 1.112 1.237 1.362
- - - - - - - - - - 1.108 1.233 1.358
0.213 0.271 0.329 0.385 0.444 0.502 0.559 0.677 0.795 0.910 1.023 1.148 1.256
0.223 0.281 0.343 0.400 0.462 0.521 0.583 0.703 0.822 0.938 1.063 1.188 1.313
- - - - - - - - - - 1.035 1.160 1.284
Thread Size
d
1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4
d
b1 Nominal Size
min
max
u max UNC，NC-5
UNF
8UN
b min L≤10
10＜L≤16
L＞16
ds Full body,max
Full body,min UNC
UNF
8UN
ds1 Reduced body,max UNC
UNF
8UN
Reduced body,min UNC
UNF
8UN
1.5000 1.6250 1.7500 1.8750 2.0000 2.2500 2.5000 2.7500 3.0000 3.2500 3.5000 3.7500 4.0000
2.250 2.438 2.625 2.813 3.000 3.375 3.750 4.125 4.500 4.875 5.250 5.625 6.000
2.188 2.375 2.563 2.750 2.925 3.300 3.675 4.050 4.425 4.775 5.150 5.525 5.900
2.313 2.500 2.688 2.875 3.075 3.450 3.825 4.200 4.575 4.975 5.350 5.725 6.100
0.333 - 0.400 - 0.444 0.444 0.500 0.500 0.500 0.500 0.500 0.500 0.500
0.167 - - - - - - - - - - - -
0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250
3.250 3.500 3.750 4.000 4.250 4.750 5.250 5.750 - - - - -
3.500 3.750 4.000 4.250 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500
4.000 4.250 4.500 4.750 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000
1.5000 1.6250 1.7500 1.8750 2.0000 2.2500 2.5000 2.7500 3.0000 3.2500 3.5000 3.7500 4.0000
1.479 - 1.727 - 1.975 2.225 2.473 2.723 2.973 3.223 3.473 3.723 3.973
1.487 - - - - - - - - - - - -
1.483 1.608 1.733 1.858 1.983 2.233 2.483 2.733 2.982 3.232 3.482 3.732 3.982
1.479 - 1.727 - 1.975 2.225 2.473 2.723 2.973 3.223 3.473 3.723 3.973
1.487 - - - - - - - - - - - -
1.483 1.608 1.733 1.858 1.983 2.233 2.483 2.733 2.982 3.232 3.482 3.732 3.982
1.381 - 1.609 - 1.843 2.093 2.324 2.574 2.824 3.073 3.323 3.573 3.823
1.438 - - - - - - - - - - - -
1.409 1.534 1.659 1.784 1.909 2.158 2.408 2.658 2.908 3.158 3.407 3.657 3.907
①,Stud ends shall be chamfered from the major diameter to a diameter equal to or less than the thread root diameter. The length of the chamfered end to the first full formed thread at major diameter, as determined by the distance the chamfered end enters into a cylindrical NOT GO major diameter ring gage, shall be one to two thread pitches on each end. The ends of the stud shall be reasonably square with the axis of the stud, but the slight rim or cup resulting from manufacturing shall be permissible. The ends shall be suitable for marking.

Alternative history

ASME B 18.31.2 - 2008 ASME B 18.31.2 - 2014
Send Inquiry

Similar Standards

1 Stude Threaded End ≈2d [DIN]
DIN 835 - 1972 		Stude Threaded End ≈2d

View Suppliers
2 Stude Threaded End ≈2d [DIN]
DIN 835 - 1995 		Stude Threaded End ≈2d

View Suppliers
3 Studs - Metal end ≈ 1,25 d [DIN]
DIN 939 - 1995 		Studs - Metal end ≈ 1,25 d

View Suppliers
4 Studs - Metal End ≈ 2 d [DIN]
DIN 835 - 2010 		Studs - Metal End ≈ 2 d

View Suppliers
5 Studs with A Length of Engagement Equal to About 1d [DIN]
DIN 938 - 1995 		Studs with A Length of Engagement Equal to About 1d

View Suppliers
6 Studs - Metal End ≈ 1 d [DIN]
DIN 938 - 2012 		Studs - Metal End ≈ 1 d

View Suppliers
7 Double End Studs [IFI]
IFI 136 - 2006 		Double End Studs

View Suppliers
8 Double End Studs-bm=1.25d [GB]
GB 898 - 1988 		Double End Studs-bm=1.25d

View Suppliers
9 Double End Studs-bm=2d [GB]
GB 900 - 1988 		Double End Studs-bm=2d

View Suppliers
10 Double Studs [JIS]
JIS B 1173 - 1995 		Double Studs

View Suppliers
11 Studs [JIS]
JIS B 1173 - 2010 		Studs

View Suppliers
12 Double End Studs (Clamping Type) - Product Grade B [GB]
GB 901 - 1988 		Double End Studs (Clamping Type) - Product Grade B

View Suppliers
13 Connections with Waisted Stud - Type ZU [DIN]
DIN 2510-3 (ZU) - 1971 		Connections with Waisted Stud - Type ZU
14 Metric Tap-End Studs (1.50 Engagement) [Table 3] (ASTM F568, F738M, F468M) [ASME]
ASME B 18.31.1M - 2008 (R2016) 		Metric Tap-End Studs (1.50 Engagement) [Table 3] (ASTM F568, F738M, F468M)
15 Metric Clamping-Type Studs [Table 2] (ASTM F568, F738M, F468M) [ASME]
ASME B 18.31.1M - 2008 (R2016) 		Metric Clamping-Type Studs [Table 2] (ASTM F568, F738M, F468M)
16 Studs for Use with T-Nuts [DIN]
DIN 6379 - 2003 		Studs for Use with T-Nuts
17 Connections with Double End Studs - Type HR [DIN]
DIN 2510-4 (HR) - 1971 		Connections with Double End Studs - Type HR
18 Special Foundation Bolts [DIN]
DIN 797 - 1970 		Special Foundation Bolts
19 Studs - Metal End ≈ 2.5d [DIN]
DIN 940 - 1995 		Studs - Metal End ≈ 2.5d
20 Metric Double End Studs [IFI]
IFI 528 - 1999 		Metric Double End Studs
21 Connections with Waisted Stud - Type L [DIN]
DIN 2510-3 (L) - 1971 		Connections with Waisted Stud - Type L
22 Connections with Double End Studs - Type HP [DIN]
DIN 2510-4 (HP) - 1971 		Connections with Double End Studs - Type HP
23 Double End Studs (ASTM A354 / A449 / F593 / SAE J429) [ASME]
ASME B 18.31.2 - 2008 		Double End Studs (ASTM A354 / A449 / F593 / SAE J429)
24 Dimensions for Clamping Type Studs（A193 / A320 / A437 / A453 / A540 / A1014） (Inch Series) [Table 2] [ASME]
ASME B 18.31.2 - 2014 		Dimensions for Clamping Type Studs（A193 / A320 / A437 / A453 / A540 / A1014） (Inch Series) [Table 2]
25 Connections with Double End Studs - Type GP [DIN]
DIN 2510-4 (GP) - 1971 		Connections with Double End Studs - Type GP
26 Connections with Double End Studs - Type GQ [DIN]
DIN 2510-4 (GQ) - 1971 		Connections with Double End Studs - Type GQ
27 Studs with Metric Interference Thread MFS - Part 2: Lengths of Engagement ≈ 2.5 d (Type B) [DIN]
DIN 949 (-2) - 1995 		Studs with Metric Interference Thread MFS - Part 2: Lengths of Engagement ≈ 2.5 d (Type B)
28 Double End Studs [DIN]
DIN 2509 - 2016 		Double End Studs
29 Connections with Waisted Stud - Type K [DIN]
DIN 2510-3 (K) - 1971 		Connections with Waisted Stud - Type K
30 Clamping Type Studs [ASME]
ASME B 18.31.2 - 2008 		Clamping Type Studs
31 Connections with Double End Studs - Type HQ [DIN]
DIN 2510-4 (HQ) - 1971 		Connections with Double End Studs - Type HQ
32 Special Foundation Bolts [DIN]
DIN 797 - 2009 		Special Foundation Bolts
33 Connections with Waisted Stud - Type Z [DIN]
DIN 2510-3 (Z) - 1971 		Connections with Waisted Stud - Type Z
34 Studs with Metric Interference Thread MFS - Part 1: Lengths of Engagement ≈ 2 d (Type A) [DIN]
DIN 949-1 - 1995 		Studs with Metric Interference Thread MFS - Part 1: Lengths of Engagement ≈ 2 d (Type A)
35 Studs for Use with T-Nuts ( Long b1 ) [DIN]
DIN 6379 - 2003 		Studs for Use with T-Nuts ( Long b1 )
36 Studs with a Length of Engagement Equal to About 2.5d [DIN]
DIN 940 - 1983 		Studs with a Length of Engagement Equal to About 2.5d
37 Double End Studs [DIN]
DIN 2509 - 1986 		Double End Studs
38 Connections with Double End Studs - Type HS [DIN]
DIN 2510-4 (HS) - 1971 		Connections with Double End Studs - Type HS
39 Connections with Double End Studs - Type GS [DIN]
DIN 2510-4 (GS) - 1971 		Connections with Double End Studs - Type GS
40 Studs with a Length of Engagement Equal to About 2.5d [DIN]
DIN 940 - 2010 		Studs with a Length of Engagement Equal to About 2.5d
41 Connections with Waisted Stud - Type KU [DIN]
DIN 2510-3 (KU) - 1971 		Connections with Waisted Stud - Type KU
42 Connections with Double End Studs - Type GR [DIN]
DIN 2510-4 (GR) - 1971 		Connections with Double End Studs - Type GR
43 Double End Studs(Clamping Type) - Product Grade C [GB]
GB 953 - 1988 		Double End Studs(Clamping Type) - Product Grade C
44 Long Metal End Studs - ISO Metric Coarse Thread - Finiah A [UNI]
UNI 59141966 		Long Metal End Studs - ISO Metric Coarse Thread - Finiah A
45 Double End Studs, bm=1d [UNI]
UNI 5909 - 1993 		Double End Studs, bm=1d
46 Studs - Product A and B (b1=1d, 1.25d 或 2d) [NF]
NF E 25-135 - 1986 		Studs - Product A and B (b1=1d, 1.25d 或 2d)
47 Medium End Studs (b1=1.5d)-ISO Metric Coarse Thread - Product Grade A [UNI]
UNI 5911 - 1993 		Medium End Studs (b1=1.5d)-ISO Metric Coarse Thread - Product Grade A
48 Set of Anchor Bolt with Rolled Threads for Structures - ABR [JIS]
JIS B 1220 (ABR) - 2015 		Set of Anchor Bolt with Rolled Threads for Structures - ABR
49 Connections with Waisted Stud - Type SD [GB]
GB /T 13807.2 (SD) - 2008 		Connections with Waisted Stud - Type SD
50 Screwd Studs - UNC Thread [Table 4] [BS]
BS 2693-1 - 1956 		Screwd Studs - UNC Thread [Table 4]
51 Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud [JIS]
JIS A 5542 (A3) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud
52 Double End Studs, bm=1d [UNI]
UNI 5909 - 1966 		Double End Studs, bm=1d
53 Connections with Waisted Stud - Type S [GB]
GB /T 13807.2 (S) - 2008 		Connections with Waisted Stud - Type S
54 Screwd Studs -B.S.W.Thread [Table 6] [BS]
BS 2693-1 - 1956 		Screwd Studs -B.S.W.Thread [Table 6]
55 Studs - Product A and B b1=1.5d [NF]
NF E 25-135 - 1986 		Studs - Product A and B b1=1.5d
56 Double End Studs for Pipe Flange Connection [GB]
GB /T 9125 - 2010 		Double End Studs for Pipe Flange Connection
57 Connections with Waisted Stud - Type A [GB]
GB /T 13807.2 (A) - 2008 		Connections with Waisted Stud - Type A
58 Connections with Waisted Stud - Type L [GB]
GB /T 13807.2 (L) - 2008 		Connections with Waisted Stud - Type L
59 Connections With Waisted Stud-Studs - Type S [GB]
GB /T 13807.2 - 1992 		Connections With Waisted Stud-Studs - Type S
60 Set of Anchor Bolt with Rolled Threads for Structures [JIS]
JIS B 1220 - 2010 		Set of Anchor Bolt with Rolled Threads for Structures
61 Screwd Studs - UNF Thread [Table 3] [BS]
BS 2693-1 - 1956 		Screwd Studs - UNF Thread [Table 3]
62 Connections with Waisted Stud - Type AD [GB]
GB /T 13807.2 (AD) - 2008 		Connections with Waisted Stud - Type AD
63 Medium End Studs -ISO Metric Coarse Thread - Product Grade A [UNI]
UNI 5911 - 1966 		Medium End Studs -ISO Metric Coarse Thread - Product Grade A
64 Screwd Studs - B.A. Thread [Table 7] [BS]
BS 2693-1 - 1956 		Screwd Studs - B.A. Thread [Table 7]
65 Double End Studs - Product Grade B for Pipe Flange Connection [GB]
GB /T 9125 - 2010 		Double End Studs - Product Grade B for Pipe Flange Connection
66 Set of Anchor Bolt with Cut Threads for Structures - ABM [JIS]
JIS B 1220 (ABM) - 2015 		Set of Anchor Bolt with Cut Threads for Structures - ABM
67 Double End Studs for Pipe Flange Connection [GB]
GB /T 9125 - 2003 		Double End Studs for Pipe Flange Connection
68 Stainless Steel Double-end Stud Bolt [JIS]
JIS A 5540 - 2008 		Stainless Steel Double-end Stud Bolt
69 Double End Studs for Pipe Flange Connection - PN Designated [GB]
GB /T 9125.1 - 2020 		Double End Studs for Pipe Flange Connection - PN Designated
70 Double End Studs, bm=1d [GB]
GB 897 - 1988 		Double End Studs, bm=1d
71 Double End Studs b1=1.5d [GB]
GB 899 - 1988 		Double End Studs b1=1.5d
72 Double-end Dtud Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Double-end Dtud Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
73 Screwd Studs - B.S.F. Thread [Table 5] [BS]
BS 2693-1 - 1956 		Screwd Studs - B.S.F. Thread [Table 5]
74 Double End Studs [YJT]
YJT 2003 (BCEQ-9411 A1) 		Double End Studs
75 Flange Connections of Wellhead Equipment - Stud - Modification 2 [GOST]
GOST 28919 - 1991 		Flange Connections of Wellhead Equipment - Stud - Modification 2
76 Double End Studs [CNS]
CNS 4605 - 1978 		Double End Studs
77 Double End Studs [CNS]
CNS 4604 - 1978 		Double End Studs
78 Double End Studs [CNS]
CNS 4603 - 1978 		Double End Studs
79 Double End Studs [CNS]
CNS 4609 - 1983 		Double End Studs
80 Double End Studs for T-Nuts [CNS]
CNS 4607 - 1983 		Double End Studs for T-Nuts
81 Double End Studs [CNS]
CNS 4606 - 1983 		Double End Studs
82 Flange Connections of Wellhead Equipment - Stud - Modification 1 [GOST]
GOST 28919 - 1991 		Flange Connections of Wellhead Equipment - Stud - Modification 1
83 Double End Studs - Type 2 [OCT]
OCT 26 - 2040 (Type 2) - 1996 		Double End Studs - Type 2
84 Double End Studs - Type 1 [OCT]
OCT 26 - 2040 (Type 1) - 1996 		Double End Studs - Type 1
85 Double End Studs [GOST]
GOST 22032 - 1976 		Double End Studs