Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [MJ/UNJ] MJ/UNJ threads

Internal Driving

External Driving

Locking Type

Shank

Point

EN 1665 (R) - 1997
Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) View Suppliers
EN 3007 - 1996
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1662 - 1997
Hexagon Bolts with Flange - Small Series View Suppliers
EN 3006 - 1994
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1665 (S) - 1997
Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) View Suppliers
EN 22340 (A) - 1992
Clevis Pins without Head - Form A
EN 28746 - 1992
Grooved Pins with Round Head
EN 2897 - 1996
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235℃
EN 24017 - 1991
Hexagon Head Screws - Product Grades A and B
EN 24033 - 1991
Hexagon Nuts, Style 2 - Product Grades A and B
EN 14399-4 (Bolt) - 2005
High-Strength Structural Bolting Assemblies for Preloading - Part 4: System HV - Hexagon Bolts
EN 14399-3 (Bolt) - 2015
High-strength Structural Bolting Assemblies for Preloading - Part 3: System HR — Hexagon Bolt
EN 27435 - 1992
Slotted Set Screws with Long Dog Point
EN 1661 - 1997
Hexagon Nuts with Flange
EN 14399-9 (HN washer) - 2009
High-strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV — Nut Face Washers (HN)
EN 14399-8 (Nut) - 2018
High-Strength Structural Bolting Assemblies for Preloading - Part 8: System HV–Hexagon Fit Nuts
EN 28752 - 1993
Spring-Type Straight Pins - Slotted
EN 28741 - 1992
Grooved Pins - Half-length Reverse-taper Grooved
EN 3542 - 1998
Aerospace series - Inserts, Screw Thread, Helical Coil, Self-locking, in Heat Resisting Nickel Base Alloy NI-PH2801 (Inconel X750)
EN 1677-3 - 2001 (+A1:2008)
Forged Steel Self-locking Hooks - Grade 8

Previous

1 2 3 4 5 6

Product Category

Non-standard Fasteners

Non-standard washers Non-standard retaining rings Non-standard pins

Ground Hollow Dowels

Stamping Parts

Wing nuts Wing screws Thumb screws

Kinsom Custom Fasteners

Automotive industry Spare parts Clear zinc coating

High-Quality Stud Bolts

Heat-resistant coarse shank stud bolts Duplex stainless steel coarse shank stud bolts Double-ended stud bolts

Solid Pins

Closed End, Open End, Double Drum

Custom Rivet Nut, Break Pull Mandrel Hemlok, Outer Lock, Inner Lock, GB Clinching Nut, Self-Clinching Stud

Nuts

Hex. nuts Thin nuts Flange nuts

Rivets

Rivet nuts Rivet studs Rivet screws

Bolts&Screws

Hex bolts Hex socket cap screws Wheel bolts

Leave a Message