简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Slot stones, loose - Form A

DIN 6323 (A) - 2003

Display drawing:

德标DIN 6323 (A) - 2003 DIN6323 6323DIN Slot stones, loose - Form A
Size
12
×6 		12
×8 		12
×10 		20
×12 		20
×14 		20
×16 		20
×18
b1 max=nominal size
min
b2 max=nominal size
min
h1
h2
L
n
12 12 12 20 20 20 20
11.989 11.989 11.989 19.987 19.987 19.987 19.987
6 8 10 12 14 16 18
5.992 7.991 9.991 11.989 13.989 15.989 17.989
12 12 12 14 14 14 14
3.6 3.6 3.6 5.5 5.5 5.5 5.5
20 20 20 32 32 32 32
2 2 2 2 2 2 2
Send Inquiry

Similar Standards

1 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885-1 (A) - 2021 		Parallel Keys, Deep Pattern - Type A

View Suppliers
2 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885 (A) - 1968 		Parallel Keys, Deep Pattern - Type A

View Suppliers
3 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885 (J) - 1968 		Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
4 Thin Parallel Keys [ISO]
ISO 2491 - 1974 		Thin Parallel Keys
5 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885 (G) - 1968 		Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
6 Slot stones, loose - Form B [DIN]
DIN 6323 (B) - 2003 		Slot stones, loose - Form B
7 Rectangular Key [DIN]
DIN 6880 - 1975 		Rectangular Key
8 Metric Square And Pectang-Ular Keys [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 (R2008) 		Metric Square And Pectang-Ular Keys
9 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885-1 (J) - 2021 		Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
10 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885 (F) - 1968 		Parallel Keys, With Two Step Bores For Fixation Screw - Type F
11 Square Key [DIN]
DIN 6880 - 1975 		Square Key
12 Rectangular Key [DIN]
DIN 6880 (B) - 2011 		Rectangular Key
13 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885-1 (F) - 2021 		Parallel Keys, With Two Step Bores For Fixation Screw - Type F
14 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885-1 (D) - 2021 		Parallel Keys,With Step Bore Fore Fixation Screw - Type D
15 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885-1 (B) - 2021 		Parallel Keys, Deep Pattern - Type B
16 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885-1 (H) - 2021 		Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
17 Flat Rectangular Key [DIN]
DIN 6880 (C) - 2011 		Flat Rectangular Key
18 Metric Interference Fit Flat Key [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 		Metric Interference Fit Flat Key
19 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885-1 (G) - 2021 		Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
20 Metric square keys [ASME/ANSI]
ASME/ANSI B 18.25.1M - 1996 		Metric square keys
21 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885 (E) - 1968 		Parallel Keys, With Two Step Bores For Fixation Screw - Type E
22 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885-1 (E) - 2021 		Parallel Keys, With Two Step Bores For Fixation Screw - Type E
23 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885 (H) - 1968 		Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
24 Square Key [DIN]
DIN 6880 (A) - 2011 		Square Key
25 Flat Rectangular Key [DIN]
DIN 6880 - 1975 		Flat Rectangular Key
26 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885 (C) - 1968 		Parallel Keys, with Step Bore Fore Fixation Screw - Type C
27 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885-1 (C) - 2021 		Parallel Keys, with Step Bore Fore Fixation Screw - Type C
28 Slot stones, loose - Form C [DIN]
DIN 6323 (C) - 2003 		Slot stones, loose - Form C
29 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885 (D) - 1968 		Parallel Keys,With Step Bore Fore Fixation Screw - Type D
30 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885 (B) - 1968 		Parallel Keys, Deep Pattern - Type B
31 Parallel keys - Type III [UNI]
UNI 6605 - 1969 		Parallel keys - Type III
32 Sguare And Rectangular Thin Keys [GB]
GB 1567 - 1979 		Sguare And Rectangular Thin Keys
33 Sguare And Rectangular Thin Keys [GB]
GB /T 1567 - 2003 		Sguare And Rectangular Thin Keys
34 Square And Rectangular Keys [GB]
GB /T 1096 - 2003 		Square And Rectangular Keys
35 Parallel keys - Type II [UNI]
UNI 6605 - 1969 		Parallel keys - Type II
36 Parallel keys - Type VI [UNI]
UNI 6605 - 1969 		Parallel keys - Type VI
37 Parallel keys - Type IV [UNI]
UNI 6605 - 1969 		Parallel keys - Type IV
38 Square and Rectangular keys [GB]
GB /T 1096 - 1979 		Square and Rectangular keys
39 Parallel keys - Type V [UNI]
UNI 6605 - 1969 		Parallel keys - Type V
40 Square And Rectangular Keys [GB]
GB /T 1097 - 2003 		Square And Rectangular Keys
41 Thin parallel keys [UNI]
UNI 7510 - 1976 		Thin parallel keys
42 Flat key [UNI]
UNI 6604 - 1969 		Flat key
43 Parallel keys - Type I [UNI]
UNI 6605 - 1969 		Parallel keys - Type I
44 Square And Rectangular Keys [GB]
GB 1097 - 1979 		Square And Rectangular Keys
45 Keys couplings with prismatic Keys [GOST]
GOST 23360 - 1978 		Keys couplings with prismatic Keys
46 Type A - Keys with both ends round [IS]
IS 2048 (A) - 1983 		Type A - Keys with both ends round
47 Type B - Keys with both ends square [IS]
IS 2048 (B) - 1983 		Type B - Keys with both ends square
48 Type C - keys with both ends round with hole for one retaining screw [IS]
IS 2048 (C) - 1983 		Type C - keys with both ends round with hole for one retaining screw
49 Type D - keys with both ends square with hole for one retaining screw [IS]
IS 2048 (D) - 1983 		Type D - keys with both ends square with hole for one retaining screw
50 Type E - Keys with both ends round with holes for two retaining screws [IS]
IS 2048 (E) - 1983 		Type E - Keys with both ends round with holes for two retaining screws
51 Type F - Keys with both ends square with holes for two retaining screws [IS]
IS 2048 (F) - 1983 		Type F - Keys with both ends square with holes for two retaining screws
52 Type G - keys with both ends square with chamfer and hole for one retaining screw [IS]
IS 2048 (G) - 1983 		Type G - keys with both ends square with chamfer and hole for one retaining screw
53 Type H - Keys with both ends square with chamfer and holes for two retaining screws [IS]
IS 2048 (H) - 1983 		Type H - Keys with both ends square with chamfer and holes for two retaining screws
54 Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve [IS]
IS 2048 (J) - 1983 		Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve