IFI 114-2003
100 deg and 120 deg countersunk head style break mandrel blind rivets IFI 119-2003
100 Deg and 120 Deg countersunk headstyle structural flush break pull mandrel self-plugging blind rivets

1

IFI 134-2003
100 Deg countersunk head multi-grip flush break pull mandrel self-plugging blind rivets

1

IFI 117-2003
100 Deg countersunk head pull through mandrel blind rivets

1

IFI 130-2003
100 deg countersunk head structural splitting self-plugging pull mandrel blind rivets

1

ANSI/ASME B18.5-2008
114° Countersunk square neck bolts IFI 126-2003
120 Deg Countersunk head style break mandrel closed end blind rivets

1

ANSI/ASME B18.7-2001
120 degree countersunk head semi-tubular rivets GB /T954-1986
120° Countersunk head rivets

1

GB /T874-1986
120° countersunk head semi-tubular rivets GB /T1012-1986
120° Raised countersunk head rivets

1

SAE J492-1968
120°Countersunk head semitubular rivets Table16 GB 974-1976
120°Cross recessed raised countersunk screws CNS 4419-1981
120°Flat countersunk head short square neck bolts GB /T17880.4-1999
120°Small countersunk head riveted nuts

4

YJT 1004-2012
120°small countersunk internal and external half hex rivet nuts

3

BS 3575-1963
150 degree countersunk head semi-tubular rivets for break pad

1

ANSI/ASME B18.7-2001
150 degree flat countersunk head semi-tubular rivets GB /T3763-2008
24° cone connectors and flared couplings - Hexagon thin nut GB /T17880.2-1999
90° Countersunk head riveted nuts

4

GB /T17880.3-1999
90° Small countersunk head riveted nuts

4

SAE J492-1968
90°Countersunk head semitubular rivets Table15 DIN 18182-4-1987
Accessories for the installation of gypsum plasterboard Nails GB /T923-2009
Acorn hexagon nuts JIS B1183-2010
Acorn hexagon nuts GB /T923-1988
Acorn nuts GB /T802-1988
Acorn nuts JIS B1181-2001
Acorn nuts with fine pitch-combined type GB /T802.1-2008
Acorn nuts-assembling type JIS B1183-1994
Acorn nuts-combined type JIS B1181-2001
Acorn nuts-combined type JIS B1183-2010
Acorn nuts—Assembling type JIS B1181-2001
Acorn nuts，Fine pitch GB /T4329-2001
actor and machinery for agriculture and forestry-spring pins DIN 705-2007
Adjusting rings ANSI/ASME B18.29.1-1993
Aerodynamic installation tools for wire thread insert EN 3542-1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) EN 4162-2009
Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1100 MPa (at ambient temperature)/235 °C EN 3006-1994
Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C EN 3009-1998
Aerospace Series,Hexagon head bolts with relieved shank,long thread,in heat resisting nickel base alloy NI-P100HT(Inconel 718),silver plated— Classification: 1275 MPa(at ambient tmperature)/650℃ EN 2874-1996
Aerospace series-bolt,larg bihexagonal head,close tolerance normal shank,medium length thread EN 3007-1996
Aerospace series-Hexagon head bolts with relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C EN 3008-1998
Aerospace series-hexagon head Bolts with relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C EN 2944-1998
Aerospace series-Inserts, screw thread, helical coil, self-lockong, in corrosion resisting steel FE-PA3004 DIN 65438-1993
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa,for temperatures up to 315 ℃ DIN 65517-2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy DIN 11015-1995
Agricultural machinery - Flat countersunk square neck bolts with short square ANSI/ASME B18.16.6-2017
All-metal prevailing torque type hex flange nuts DIN 980-1987
All-metal prevailing torque type hexagon nuts

4

ANSI/ASME B18.16.6-2017
All-metal prevailing torque type hexagon nuts NF E25-420-1997(R2002)
All-metal prevailing torque type hexagon nuts, style 2-Property classes 5, 8, 10 and 12 JIS B1199-1-2001
All-metal prevailing torque type nuts JIS B1199-1-2001
All-metal prevailing torque type nuts-Fine Thread JIS B1199-1-2001
All-metal prevailing torque type nuts-Thickness JIS B1199-1-2001
All-metal prevailing torque type nuts-Thin American system washers -SAE

1

American system washers -USS

1

GB /T799-1988
Anchor Bolt JIS B1178-1994
Anchor Bolt -A JIS B1178-1994
Anchor Bolt -B