Click Specification

Parallel keys - Type II

UNI 6605 - 1969

Display drawing:

Size ^①

8
×7

10
×8

12
×8

14
×9

16
×10

18
×11

20
×12

22
×14

25
×14

28
×16

32
×18

b
h
d₁
d₂
d₃	6H
t₃
t₅
For Nominal Thread Diameter	Filettatura × lunghezza

-	8	10	12	14	16	18	20	22	25	28
-	7	8	8	9	10	11	12	14	14	16
-	3.4	3.4	4.5	5.5	5.5	6.6	6.6	6.6	9	11
-	6	6	8	10	10	11	11	11	15	18
-	M3	M3	M4	M5	M5	M6	M6	M6	M8	M10
-	2.4	2.4	3.2	4.1	4.1	4.8	4.8	4.8	6	7.3
-	7	8	10	10	10	12	12	12	15	17
-	M3×8	M3×10	M4×10	M5×10	M5×10	M6×12	M6×12	M6×16	M8×16	M10×16

Size ^①

36
×20

40
×22

45
×25

50
×28

56
×32

63
×32

70
×36

80
×40

90
×45

100
×50

b
h
d₁
d₂
d₃	6H
t₃
t₅
For Nominal Thread Diameter	Filettatura × lunghezza

32	36	40	45	50	56	63	70	80	90
18	20	22	25	28	32	32	36	40	45
11	14	14	14	14	14	14	18	18	22
18	20	20	20	20	20	20	26	26	33
M10	M12	M12	M12	M12	M12	M12	M16	M16	M20
7.3	8.3	8.3	8.3	8.3	8.3	8.3	11.5	11.5	13.5
17	20	20	20	20	20	20	24	24	30
M10×20	M12×25	M12×25	M12×30	M12×30	M12×35	M12×35	M16×40	M16×45	M20×50

①,b×h

Send Inquiry

Similar Standards

1	[DIN] DIN 6885-1 (A) - 2021	Parallel Keys, Deep Pattern - Type A View Suppliers
2	[DIN] DIN 6885 (A) - 1968	Parallel Keys, Deep Pattern - Type A View Suppliers
3	[DIN] DIN 6885 (J) - 1968	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
4	[ISO] ISO 2491 - 1974	Thin Parallel Keys
5	[DIN] DIN 6885 (G) - 1968	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
6	[DIN] DIN 6323 (B) - 2003	Slot stones, loose - Form B
7	[DIN] DIN 6880 - 1975	Rectangular Key
8	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998 (R2008)	Metric Square And Pectang-Ular Keys
9	[DIN] DIN 6885-1 (J) - 2021	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
10	[DIN] DIN 6885 (F) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
11	[DIN] DIN 6880 - 1975	Square Key
12	[DIN] DIN 6880 (B) - 2011	Rectangular Key
13	[DIN] DIN 6885-1 (F) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
14	[DIN] DIN 6885-1 (D) - 2021	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
15	[DIN] DIN 6885-1 (B) - 2021	Parallel Keys, Deep Pattern - Type B
16	[DIN] DIN 6885-1 (H) - 2021	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
17	[DIN] DIN 6880 (C) - 2011	Flat Rectangular Key
18	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998	Metric Interference Fit Flat Key
19	[DIN] DIN 6885-1 (G) - 2021	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
20	[ASME/ANSI] ASME/ANSI B 18.25.1M - 1996	Metric square keys
21	[DIN] DIN 6323 (A) - 2003	Slot stones, loose - Form A
22	[DIN] DIN 6885 (E) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
23	[DIN] DIN 6885-1 (E) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
24	[DIN] DIN 6885 (H) - 1968	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
25	[DIN] DIN 6880 (A) - 2011	Square Key
26	[DIN] DIN 6880 - 1975	Flat Rectangular Key
27	[DIN] DIN 6885 (C) - 1968	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
28	[DIN] DIN 6885-1 (C) - 2021	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
29	[DIN] DIN 6323 (C) - 2003	Slot stones, loose - Form C
30	[DIN] DIN 6885 (D) - 1968	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
31	[DIN] DIN 6885 (B) - 1968	Parallel Keys, Deep Pattern - Type B
32	[UNI] UNI 6605 - 1969	Parallel keys - Type III
33	[GB] GB 1567 - 1979	Sguare And Rectangular Thin Keys
34	[GB] GB /T 1567 - 2003	Sguare And Rectangular Thin Keys
35	[GB] GB /T 1096 - 2003	Square And Rectangular Keys
36	[UNI] UNI 6605 - 1969	Parallel keys - Type VI
37	[UNI] UNI 6605 - 1969	Parallel keys - Type IV
38	[GB] GB /T 1096 - 1979	Square and Rectangular keys
39	[UNI] UNI 6605 - 1969	Parallel keys - Type V
40	[GB] GB /T 1097 - 2003	Square And Rectangular Keys
41	[UNI] UNI 7510 - 1976	Thin parallel keys
42	[UNI] UNI 6604 - 1969	Flat key
43	[UNI] UNI 6605 - 1969	Parallel keys - Type I
44	[GB] GB 1097 - 1979	Square And Rectangular Keys
45	[GOST] GOST 23360 - 1978	Keys couplings with prismatic Keys
46	[IS] IS 2048 (A) - 1983	Type A - Keys with both ends round
47	[IS] IS 2048 (B) - 1983	Type B - Keys with both ends square
48	[IS] IS 2048 (C) - 1983	Type C - keys with both ends round with hole for one retaining screw
49	[IS] IS 2048 (D) - 1983	Type D - keys with both ends square with hole for one retaining screw
50	[IS] IS 2048 (E) - 1983	Type E - Keys with both ends round with holes for two retaining screws
51	[IS] IS 2048 (F) - 1983	Type F - Keys with both ends square with holes for two retaining screws
52	[IS] IS 2048 (G) - 1983	Type G - keys with both ends square with chamfer and hole for one retaining screw
53	[IS] IS 2048 (H) - 1983	Type H - Keys with both ends square with chamfer and holes for two retaining screws
54	[IS] IS 2048 (J) - 1983	Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve