About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Rings for Shoulder - Light Series

GB /T 886 (L) - 1986

Display drawing:

国标GB /T886 (L) - 1986 GB886 886GB Rings for Shoulder - Light Series
Nominal Diameter
d
30 35 40 45 50 55 60 65 70
d max
min
D
H max
min
D1 ≥
30.13 35.16 40.16 45.16 50.16 55.19 60.19 65.19 70.19
30 35 40 45 50 55 60 65 70
36 42 47 52 58 65 70 75 80
4 4 4 4 4 5 5 5 5
3.7 3.7 3.7 3.7 3.7 4.7 4.7 4.7 4.7
32 37 42 47 52 58 63 68 73
Nominal Diameter
d
75 80 85 90 95 100 105 110 120
d max
min
D
H max
min
D1 ≥
75.19 80.19 85.22 90.22 95.22 100.22 105.22 110.22 120.22
75 80 85 90 95 100 105 110 120
85 90 95 100 110 115 120 125 135
5 6 6 6 8 8 8 8 8
4.7 5.7 5.7 5.7 7.64 7.64 7.64 7.64 7.64
78 83 88 93 98 103 109 114 124

Alternative history

GB /T 886L - 1986 GB /T 886M - 1986 GB /T 886H - 1986
Send Inquiry

Similar Standards

1 Adjusting Rings [DIN]
DIN 705 - 2007 		Adjusting Rings
2 Lock Rings with Screws [GB]
GB 884 - 1986 		Lock Rings with Screws
3 Rolling Bearings - Snap Ring [GB]
GB 305 - 1989 		Rolling Bearings - Snap Ring
4 Rings for Shoulder - Heavy Series [GB]
GB /T 886 (H) - 1986 		Rings for Shoulder - Heavy Series
5 Lock Rings at the End of Shaft with Screw [GB]
GB 891 - 1986 		Lock Rings at the End of Shaft with Screw
6 Rings for Shoulder - Mediumn Series [GB]
GB /T 886 (M) - 1986 		Rings for Shoulder - Mediumn Series
7 Lock Rings with Cone Pin [GB]
GB /T 883 - 1986 		Lock Rings with Cone Pin
8 Lock Rings with Screw and Circlip [GB]
GB 885 - 1986 		Lock Rings with Screw and Circlip
9 Lock Rings at the End of Shaft with Bolt [GB]
GB 892 - 1986 		Lock Rings at the End of Shaft with Bolt
10 Ring, Retaining-Spiral, Internal Light Duty, CRES [SAE]
SAE AS 3217 (C) - 2020 		Ring, Retaining-Spiral, Internal Light Duty, CRES