Click Specification

Hexagon Socket Head Cap Screws [Table 1] (ASTM A574 / F837)

ASME B 18.3 (T1) - 2012

Display drawing:

Download CAD Model

Size

10#

12#

1/4

5/16

d	Screw Diameter
PP	UNC
	UNF
	UNEF
d_s	max=nominal size
	min
d_k ^①	max
	min
k	max
	min
s	Nominal Size
t	min
b	min
c	chamfer or radius	max
r	chamfer or radius	max
w	min

0.06	0.073	0.086	0.099	0.112	0.125	0.138	0.164	0.19	0.216	0.25	0.3125
-	64	56	48	40	40	32	32	24	24	20	18
80	72	64	56	48	44	40	36	32	28	28	24
-	-	-	-	-	-	-	-	-	32	32	32
0.06	0.073	0.086	0.099	0.112	0.125	0.138	0.164	0.19	0.216	0.25	0.3125
0.0568	0.0695	0.0822	0.0949	0.1075	0.1202	0.1329	0.1585	0.184	0.2095	0.2435	0.3053
0.096	0.118	0.14	0.161	0.183	0.205	0.226	0.27	0.312	0.324	0.375	0.469
0.091	0.112	0.134	0.154	0.176	0.198	0.216	0.257	0.298	0.314	0.354	0.446
0.06	0.073	0.086	0.099	0.112	0.125	0.138	0.164	0.19	0.216	0.25	0.312
0.057	0.07	0.083	0.095	0.108	0.121	0.134	0.159	0.185	0.21	0.244	0.306
0.05	0.062	0.078	0.078	0.094	0.094	0.109	0.141	0.156	0.156	0.188	0.25
0.025	0.031	0.038	0.044	0.051	0.057	0.064	0.077	0.09	0.103	0.12	0.151
0.5	0.62	0.62	0.62	0.75	0.75	0.75	0.88	0.88	0.88	1	1.12
0.004	0.005	0.008	0.008	0.009	0.012	0.013	0.014	0.018	0.022	0.025	0.033
0.007	0.007	0.007	0.007	0.008	0.008	0.008	0.008	0.008	0.010	0.010	0.010
0.020	0.025	0.029	0.034	0.038	0.043	0.047	0.056	0.065	0.082	0.095	0.119

Size

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1-1/8

1-1/4

1-3/8

1-1/2

d	Screw Diameter
PP	UNC
	UNF
	UNEF
d_s	max=nominal size
	min
d_k ^①	max
	min
k	max
	min
s	Nominal Size
t	min
b	min
c	chamfer or radius	max
r	chamfer or radius	max
w	min

0.375	0.4375	0.5	0.5625	0.625	0.75	0.875	1	1.125	1.25	1.375	1.5
16	14	13	12	11	10	9	8	7	7	6	6
24	20	20	18	18	16	14	12	12	12	12	12
32	28	28	24	24	20	20	20	18	18	18	18
0.375	0.4375	0.5	0.5625	0.625	0.75	0.875	1	1.125	1.25	1.375	1.5
0.3678	0.4294	0.4919	0.5538	0.6163	0.7406	0.8647	0.9886	1.1086	1.2336	1.3568	1.4818
0.562	0.656	0.75	0.843	0.938	1.125	1.312	1.5	1.688	1.875	2.062	2.25
0.54	0.631	0.725	0.827	0.914	1.094	1.291	1.476	1.665	1.852	2.038	2.224
0.375	0.438	0.5	0.562	0.625	0.75	0.875	1	1.125	1.25	1.375	1.5
0.368	0.43	0.492	0.554	0.616	0.74	0.864	0.988	1.111	1.236	1.36	1.485
0.312	0.375	0.375	0.437	0.5	0.625	0.75	0.75	0.875	0.875	1	1
0.182	0.213	0.245	0.276	0.307	0.37	0.432	0.495	0.557	0.62	0.682	0.745
1.25	1.38	1.5	1.5	1.75	2	2.25	2.5	2.81	3.12	3.44	3.75
0.040	0.047	0.055	0.062	0.070	0.085	0.100	0.114	0.129	0.144	0.160	0.176
0.010	0.015	0.015	0.015	0.015	0.015	0.020	0.020	0.020	0.020	0.020	0.020
0.143	0.166	0.190	0.214	0.238	0.285	0.333	0.380	0.428	0.475	0.523	0.570

Size

1-3/4

2-1/4

2-1/2

2-3/4

3-1/4

3-1/2

3-3/4

d	Screw Diameter
PP	UNC
	UNF
	UNEF
d_s	max=nominal size
	min
d_k ^①	max
	min
k	max
	min
s	Nominal Size
t	min
b	min
c	chamfer or radius	max
r	chamfer or radius	max
w	min

1.75	2	2.25	2.5	2.75	3	3.25	3.5	3.75	4
5	4.5	4.5	4	4	4	4	4	4	4
-	-	-	-	-	-	-	-	-	-
-	-	-	-	-	-	-	-	-	-
1.75	2	2.25	2.5	2.75	3	3.25	3.5	3.75	4
1.7295	1.978	2.228	2.4762	2.7262	2.9762	3.2262	3.4762	3.7262	3.9762
2.625	3	3.375	3.75	4.125	4.5	4.875	5.25	5.625	6
2.597	2.97	3.344	3.717	4.09	4.464	4.837	5.211	5.584	5.958
1.75	2	2.25	2.5	2.75	3	3.25	3.5	3.75	4
1.734	1.983	2.232	2.481	2.73	2.979	3.228	3.478	3.727	3.976
1.25	1.5	1.75	1.75	2	2.25	2.25	2.75	2.75	3
0.87	0.995	1.12	1.245	1.37	1.495	1.62	1.745	1.87	1.995
4.38	5	5.62	6.25	6.88	7.5	8.12	8.75	9.38	10
0.207	0.238	0.269	0.300	0.332	0.363	0.394	0.426	0.458	0.489
0.020	0.020	0.036	0.036	0.036	0.036	0.036	0.036	0.036	0.036
0.665	0.760	0.855	0.950	1.045	1.140	1.235	1.330	1.425	1.520

①,Material
a、Faricated from alloy steel and shall conform in all respects to ASTM A574
b、Faricated from corrosion-resistant steel and shall conform in all respects to ASTM F837
②,Heads may be plain or knurled at the option of the manufacturer, unless specified otherwise by the customer. For knurled screws, the maximum head diameter shall be measured across the tops of the knurl, and the minimum head diameter shall
be the diameter of the unknurled portion or the diameter across the tops of the knurl for those screws not having an unknurled portion, just above the radius or chamfer at the bottom edge of the head .
③,Thread. Thread shall be Unified external thread with radius root: Class 3A UNRC and UNRF Series for screw sizes 0 (0.060 in) through 1in.; Class 2A UNRC and UNRF Series for sizes over 1 in. to 1-1/2 in., inclusive; and Class 2A UNR Series for sizes larger than 1-1/2 in. For plated or unplated screws, acccptability shall be based upon System 22, ASME B1.3. Class 3A does not provide a plating allowance.
④,Surface Roughness. For alloy steel screws of sizes up to and incuding 5/8 in., and nominal lengths equal to or less than 8 times the basic screw diameter, the surface roughness of the screws shall not exceed 63 μin. (arithmetical average) on the fillet and head bearing surfaces, nor exceed 32 μin. (arithmetical average) on the threads. For larger sizes, longer lengths, and corrosion-resistant steel screws, the surface roughness of the screws shall not exceed 125 μin. (arithmetical average) on the body [see Note (8)], fillet [see Note (14)], and head bearing surfaces. Normally, it shall be sufficient to ascertain that these surfaces on screws have the equivalent of a smooth machined finish by visual comparison with known surface standards. However, where it is practical and deemed necessary to measure these surfaces with commercially available equipment, roughness measurements shall be taken axially on the body and fillet surfaces, and circumferentially on the bearing surface. (See ASME B46.1, Surface Texture .)

Alternative history

ANSI/ASME B 18.3 - 1986 ASME B 18.3 - 2003(R2008) ASME B 18.3 - 2012

Suppliers

Best price if from GlobalFastener.com.

GotopScrews International Co., Limited

Manager Zhuang
+86-13008864675
+86-755-89505088

aterial: carbon steel, alloy steel, stainless steel, copper, aluminum, titanium; Specifications: #0~1/4; Length: 1~60mm; Surface Treatment: galvanizing, nickel plating, zinc nickel alloy, electrophoresis, dacromet, CD grain, PVD, etc.

Join Us

Similar Standards

1	[ISO] ISO 4762 - 1997	Hexagon Socket Head Cap Screws View Suppliers
2	[DIN EN ISO] DIN EN ISO 4762 - 2004	Hexagon Socket Head Cap Screws View Suppliers
3	[ASME/ANSI] ASME/ANSI B 18.3 - 1986	Hexagon Socket Head Cap Screws View Suppliers
4	[DIN] DIN 7984 - 2009	Hexagon Socket Head Cap Screws with Low Head View Suppliers
5	[ASME] ASME B 18.3 - 2003 (R2008)	Hexagon Socket Head Cap Screws View Suppliers
6	[DIN] DIN 7984 - 2022	Hexagon Socket Head Cap Screws with Low Head with Reduced Loadability View Suppliers
7	[DIN] DIN 7984 - 1985	Hexagon Socket Thin Head Cap Screws View Suppliers
8	[DIN EN ISO] DIN EN ISO 12474 - 2011	Hexagon Socket Head Cap Screws with Metric Fine Pitch Thread View Suppliers
9	[DIN] DIN 7984 - 2021	Hexagon Socket Head Cap Screws with Low Head with Reduced Loadability View Suppliers
10	[DIN] DIN 912 - 1983	Hexagon Socket Head Cap Screws View Suppliers
11	[DIN] DIN 7964 (E) - 1990	Reduced Shanke Bolts and Screws with Coarse Thread - Hexagon Socket Head View Suppliers
12	[DIN] DIN 7984 - 2002	Hexagon Socket Thin Head Cap Screws View Suppliers
13	[ISO] ISO 4762 - 2004	Hexagon Socket Head Cap Screws View Suppliers
14	[DIN] DIN 251	Hexagon Socket Head with Serrated Flange Screws View Suppliers
15	[GB] GB 70 - 1976	Hexagon Socket Head Cap Screws View Suppliers
16	[GB] GB /T 70.1 - 2000	Hexagon Socket Head Cap Screws View Suppliers
17	[GB] GB 70 - 1985	Hexagon Socket Cap Head Screws View Suppliers
18	[GB] GB /T 70.1 - 2008	Hexagon Socket Head Cap Screws View Suppliers
19	[DIN] DIN 6912 - 2009	Hexagon Socket Head Cap Screws with Centre, with Low Head
20	[DIN] DIN 6929 (EE) - 2013	Hexagon Socket Head Cap Screws
21	[ASME/ANSI] ASME/ANSI B 18.3.1M - 1986 (R1993)	Metric Hexagon Socket Head Cap Screws
22	[DIN] DIN 6912 - 2021	Hexagon Socket Head Cap Screws with Reduced Loadability - Low Head, with Centre
23	[ASME] ASME B 18.3 - 2003 (R2008)	Low Head Hexagon Socket Cap Screws
24	[ISO] ISO 21269 - 2004	Hexagon Socket Head Cap Screws with Metric Fine Pitch Thread
25	[DIN] DIN 6912 - 2002	Hexagon Socket Thin Head Cap Screws with Pilot Recess
26	[ASME/ANSI] ASME/ANSI B 18.3.1M - 1986 (R2008)	Dimensions Of Metric Socket Head Cap Screws
27	[ASME/ANSI] ASME/ANSI B 18.3 - 2003	Spline Socket Head Cap Screws
28	[ASME] ASME B 18.3 (T12) - 2012	Low Head Hexagon Socket Cap Screws [Table 12] (ASTM F835)
29	[ISO] ISO 12474 - 2010	Hexagon Socket Head Cap Screws with Metric Fine Pitch Thread
30	[DIN] DIN 6912 - 1985	Hexagon Socket Thin Head Cap Screws with Pilot Recess
31	[JIS] JIS B 1176 - 2006	Hexagon Socket Head Cap Screws
32	[JIS] JIS B 1176 - 1988	Hexagon Socket Head Cap Screws
33	[GB] GB /T 70.6 - 2020	Hexagon Socket Head Cap Screws - Fine Pitch Thread
34	[BS] BS 2470 - 1973	Hexagon Socket Cheese Head Screws - Unified Thread
35	[BS] BS 4168-1 - 1981	Metric Hexagon Socket Cheese Head Screws
36	[BS] BS 2470 - 1973	Hexagon Socket Cheese Head Cap Screws - BSW and BSF Thread
37	[BS] BS 2470 - 1973	Hexagon Socket Cheese Head Cap Screws - BA Thread
38	[UNI] UNI 9327 - 1988	Hexagon Socket Cheese Head Thin Screws
39	[UNI] UNI 5931 - 1984	Hexagon Socket Cheese Head Screws
40	[NF] NF E 25-125 - 2004	Hexagon Socket Head Cap Screws
41	[JIS] JIS B 1176 - 2014	Hexagon Socket Head Cap Screws
42	[AS] AS 1420 - 2008 (R2015)	ISO Metric Hexagon Socket Head Cap Screws
43	[CNS] CNS 3932 - 1998	Hexagon Socket Cheese Head Screws
44	[CNS] CNS 4555 - 1981	Hexagon Socket Cheese Head Screws
45	[CNS] CNS 4556 - 1981	Hexagon Socket Head Cap Screws Short
46	[KS] KS B 1003 - 2015 (R2020)	Hexagon Socket Head Cap Screws
47	[KS] KS B 1003 - 2000	Hexagon Socket Head Cap Screws
48	[IS] IS 2269 - 2006	Hexagon Socket Head Cap Screws