简体 | 繁體 | FastenerExpo |
Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs
Default density g/cm3
Shaft Diameter
d0
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
d Nominal Size
max
min
h Nominal Size
max
min
b
d1
H
d2 max
min
m max
min
n
d3
per 1000 units ≈ kg
2.7 3.7 4.7 5.6 6.5 7.4 8.4 9.3 10.2 11 11.9 12.9 13.8 14.7 15.7 16.5
2.74 3.74 4.74 5.64 6.56 7.46 8.46 9.4 10.3 11.1 12 13 13.9 14.8 15.8 16.6
2.55 3.55 4.55 5.45 6.32 7.22 8.22 8.94 9.84 10.64 11.54 12.54 13.44 14.34 15.34 16.14
0.4 0.4 0.6 0.6 0.6 0.8 0.8 1 1 1 1 1 1 1 1 1
0.43 0.43 0.64 0.64 0.64 0.84 0.84 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05
0.34 0.34 0.53 0.53 0.53 0.7 0.7 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87
0.8 0.88 1.12 1.32 1.32 1.32 1.44 1.44 1.52 1.72 1.88 1.88 2 2.32 2.48 2.48
1 1 1 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.7 1.7 1.7 1.7 1.7
0.95 1.1 1.25 1.35 1.55 1.6 1.65 - - - - - - - - -
2.8 3.8 4.8 5.7 6.7 7.6 8.6 9.6 10.5 11.5 12.4 13.4 14.3 15.2 16.2 17
2.76 3.752 4.752 5.652 6.642 7.542 8.542 9.542 10.39 11.39 12.29 13.29 14.19 15.09 16.09 16.89
0.64 0.64 0.84 0.84 0.84 1.04 1.04 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24
0.5 0.5 0.7 0.7 0.7 0.9 0.9 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
0.3 0.3 0.3 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.9 0.9 1.1 1.2 1.2 1.5
7.2 8.8 10.7 12.2 13.8 15.2 16.4 17.6 18.6 19.6 20.8 22 23.2 24.4 25.6 27
0.02 0.03 0.08 0.11 0.12 0.19 0.22 0.24 0.28 0.35 0.41 0.44 0.51 0.65 0.74 0.78
Shaft Diameter
d0
19 20 21 22 24 25 26 28 29 30 32 34 35 36 37 38
d Nominal Size
max
min
h Nominal Size
max
min
b
d1
H
d2 max
min
m max
min
n
d3
per 1000 units ≈ kg
17.5 18.5 19.5 20.5 22.2 23.2 24.2 25.9 26.9 27.9 29.6 31.5 32.2 33.2 34.2 35.2
17.6 18.63 19.63 20.63 22.41 23.41 24.41 26.11 27.11 28.11 29.81 31.75 32.45 33.45 34.45 35.45
17.14 18.08 19.08 20.08 21.78 22.78 23.78 25.48 26.48 27.48 29.18 31 31.7 32.7 33.7 34.7
1 1 1 1 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5
1.05 1.05 1.05 1.05 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.56 1.56 1.56 1.56 1.56
0.87 0.87 0.87 0.87 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.35 1.35 1.35 1.35 1.35
2.48 2.68 2.68 2.68 3.32 3.32 3.32 3.6 3.72 3.72 3.92 4.32 4.52 4.52 4.52 5
2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5
- - - - - - - - - - - - - - - -
18 19 20 21 22.9 23.9 24.9 26.6 27.6 28.6 30.3 32.3 33 34 35 36
17.89 18.87 19.87 20.87 22.69 23.69 24.69 26.39 27.39 28.39 30.05 32.05 32.75 33.75 34.75 35.75
1.24 1.24 1.24 1.24 1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.84 1.84 1.84 1.84 1.84
1.1 1.1 1.1 1.1 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.7 1.7 1.7 1.7 1.7
1.5 1.5 1.5 1.5 1.7 1.7 1.7 2.1 2.1 2.1 2.6 2.6 3 3 3 3
28 29 31 32 34 35 36 38.4 39.8 42 44 46 48 49 50 51
0.81 0.96 1.01 1.06 1.76 1.84 1.91 2.22 2.39 2.47 2.73 4.03 4.33 4.45 4.58 5.25
Shaft Diameter
d0
40 42 45 48 50 52 55 56 58 60 62 63 65 68 70 72
d Nominal Size
max
min
h Nominal Size
max
min
b
d1
H
d2 max
min
m max
min
n
d3
per 1000 units ≈ kg
36.5 38.5 41.5 44.5 45.8 47.8 50.8 51.8 53.8 55.8 57.8 58.8 60.8 63.5 65.5 67.5
36.89 38.89 41.89 44.89 46.19 48.19 51.26 52.26 54.26 56.26 58.26 59.26 61.26 63.96 65.96 67.96
35.6 37.6 40.6 43.6 44.9 46.9 49.7 50.7 52.7 54.7 56.7 57.7 59.7 62.4 64.4 66.4
1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5
1.56 1.56 1.56 1.56 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.57 2.57 2.57 2.57 2.57
1.35 1.35 1.35 1.35 1.82 1.82 1.82 1.82 1.82 1.82 1.82 2.28 2.28 2.28 2.28 2.28
5 5 5 5 5.48 5.48 5.48 6.12 6.12 6.12 6.12 6.12 6.12 6.32 6.32 6.32
2.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
- - - - - - - - - - - - - - - -
37.5 39.5 42.5 45.5 47 49 52 53 55 57 59 60 62 65 67 69
37.25 39.25 42.25 45.25 46.75 48.75 51.7 52.7 54.7 56.7 58.7 59.7 61.7 64.7 66.7 68.7
1.84 1.84 1.84 1.84 2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.84 2.84 2.84 2.84 2.84
1.7 1.7 1.7 1.7 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.7 2.7 2.7 2.7 2.7
3.8 3.8 3.8 3.8 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
53 56 59.4 62.8 64.8 67 70.4 71.7 73.6 75.8 79 79.6 81.6 85 87.2 89.4
5.42 5.64 6.09 6.5 9.76 10.16 10.76 12.44 12.89 13.34 13.78 17.61 18.16 19.58 20.12 20.74
Shaft Diameter
d0
75 78 80 82 85 88 90 95 100 105 110 115 120 125 130 135
d Nominal Size
max
min
h Nominal Size
max
min
b
d1
H
d2 max
min
m max
min
n
d3
per 1000 units ≈ kg
70.5 73.5 74.5 76.5 79.5 82.5 84.5 89.5 94.5 98 103 108 113 118 123 128
70.96 73.96 74.96 76.96 79.96 83.04 85.04 90.04 95.04 98.54 103.54 108.54 113.54 118.54 123.63 128.63
69.4 72.4 73.4 75.4 78.4 81.2 83.2 88.2 93.2 96.7 101.7 106.7 111.7 116.7 121.5 126.5
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3
2.57 2.57 2.57 2.57 2.57 2.57 2.57 2.57 2.57 3.07 3.07 3.07 3.07 3.07 3.07 3.07
2.28 2.28 2.28 2.28 2.28 2.28 2.28 2.28 2.28 2.78 2.78 2.78 2.78 2.78 2.78 2.78
6.32 6.32 7 7 7 7 7.6 9.2 9.2 10.7 11.3 12 12 12.6 12.6 13.2
3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4
- - - - - - - - - - - - - - - -
72 75 76.5 78.5 81.5 84.5 86.5 91.5 96.5 101 106 111 116 121 126 131
71.7 74.7 76.2 78.2 81.15 84.15 86.15 91.15 96.15 100.46 105.46 110.46 115.46 120.37 125.37 130.37
2.84 2.84 2.84 2.84 2.84 2.84 2.84 2.84 2.84 3.38 3.38 3.38 3.38 3.38 3.38 3.38
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 3.2 3.2 3.2 3.2 3.2 3.2 3.2
4.5 4.5 5.3 5.3 5.3 5.3 5.3 5.3 5.3 6 6 6 6 6 6 6
92.8 96.2 98.2 101 104 107.3 110 115 121 132 136 142 145 151 158 162.8
21.6 22.47 25.25 25.89 26.86 27.89 31.46 40.38 43.15 62.01 69.07 76.78 80.06 83.36 91.83 100.7
Shaft Diameter
d0
140 145 150 155 160 165 170 175 180 185 190 195 200
d Nominal Size
max
min
h Nominal Size
max
min
b
d1
H
d2 max
min
m max
min
n
d3
per 1000 units ≈ kg
133 138 142 146 151 155.5 160.5 165.5 170.5 175.5 180.5 185.5 190.5
133.63 138.63 142.63 146.63 151.63 156.13 161.13 166.13 171.13 176.13 181.22 186.22 191.22
131.5 136.5 140.5 144.5 149.5 154 159 164 169 174 178.8 183.8 188.8
3 3 3 3 3 3 3 3 3 3 3 3 3
3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07
2.78 2.78 2.78 2.78 2.78 2.78 2.78 2.78 2.78 2.78 2.78 2.78 2.78
13.2 13.2 14 14 14 14.4 14.4 15 15 15.2 15.2 15.6 15.6
4 4 4 4 4 4 4 4 4 4 4 4 4
- - - - - - - - - - - - -
136 141 145 150 155 160 165 170 175 180 185 190 195
135.37 140.37 144.37 149.37 154.37 159.37 164.37 169.37 174.37 179.37 184.28 189.28 194.28
3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2
6 6 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
168 174.4 180 186 190 195 200 206 212 218 223 229 235
104.4 108.3 111.2 120.2 124.1 131.4 134.7 142.1 149.7 156 160.2 169.8 174.1

Suppliers

Best price if from GlobalFastener.com.
Wenzhou Maiwei Auto Parts Co., Ltd.
  • Ms. Liu

  • +86-18058320173/15382536331

  • +86-577-66001087

  • Material: Carbon Steel, Stainless Steel, Spring Steel; Specifications: M3-300; Length: 2.7-285mm; Surface Treatment: Anode Oxidation, Zinc Coating, Dacromet, Polishing.
Anhui Ningguo Dongbo Fastener Co., Ltd.
  • Manager Zhou

  • +86-13966221988

  • +86-563-4186334

  • Material: spring steel 65Mn, stainless steel 304, 420; Surface treatment: black oxide, galvanized, dacro, nature, geomet, phosphating; Specification: complete
Wenzhou Cargin Fastener Co., Ltd.
  • Asher

  • Material: carbon steel, spring steel, stainless steel; Specifications: complete specifications (can be customized according to customer requirements); Surface Treatment: black, zinc, Dacromet, phosphating etc; Sufficient stocks, welcome inquiry!

Similar Standards

1 Retaining Rings For Shafts - Normal Type [DIN]
DIN 471 (-1) - 2011
Retaining Rings For Shafts - Normal Type

View Suppliers
2 Retaining Rings For Shafts—normal Type And Heavy Type [DIN]
DIN 471 (D1400/A/DSH) - 1981
Retaining Rings For Shafts—normal Type And Heavy Type

View Suppliers
3 Retaining Rings For Shaft-Type A [GB]
GB /T 894 (A) - 2017
Retaining Rings For Shaft-Type A

View Suppliers
4 Circlips For Shaft [UNI]
UNI 7435
Circlips For Shaft

View Suppliers
5 Push-On Spring Round Nuts [JIS]
JIS B 1216 (T2) - 2006
Push-On Spring Round Nuts

View Suppliers
6 Circlips for shaft(imperial standard) with inner chamfer (N 1402/NAB) [YJT]
YJT 7024 (N1402/NAB)
Circlips for shaft(imperial standard) with inner chamfer (N 1402/NAB)

View Suppliers
7 Metric external Retaining Rings - 3AM1 [ANSI]
ANSI B 27.7 (3AM1) - 1977 (R2017)
Metric external Retaining Rings - 3AM1
8 NA4 Heavy Duty External Retaining Rings [ASME]
ASME B 18.27.2 (T6) - 1998 (R2017)
NA4 Heavy Duty External Retaining Rings
9 NA1 External Retaining Rings [ASME]
ASME B 18.27.1 (T6) - 1998 (R2017)
NA1 External Retaining Rings
10 NA12 Beveled External Retaining Rings [ASME]
ASME B 18.27.4 (T8) - 1998 (R2017)
NA12 Beveled External Retaining Rings
11 NA15 External Interlocking Retaining Rings [ASME]
ASME B 18.27.5 (T7) - 1998 (R2017)
NA15 External Interlocking Retaining Rings
12 Retaining Rings For Shafts - Heavy Type [DIN]
DIN 471 (-2) - 1981
Retaining Rings For Shafts - Heavy Type
13 Round Wire Snap Rings for Shafts [DIN]
DIN 9925 - 2016
Round Wire Snap Rings for Shafts
14 NA16 External Bowed Locking Prongs Retaining Rings [ASME]
ASME B 18.27.5 (T8) - 1998 (R2017)
NA16 External Bowed Locking Prongs Retaining Rings
15 NA10 Inverted External Retaining Rings [ASME]
ASME B 18.27.4 (T6) - 1998 (R2017)
NA10 Inverted External Retaining Rings
16 Retaining Rings For Shafts - Heavy Type [DIN]
DIN 471 (-2) - 2011
Retaining Rings For Shafts - Heavy Type
17 Retaining Rings with Lugs for Shafts [DIN]
DIN 983 - 2011
Retaining Rings with Lugs for Shafts
18 Retaining Rings With Lugs For Shafts [DIN]
DIN 983 (D2100/AK/DST) - 1981
Retaining Rings With Lugs For Shafts
19 NA7 External Retaining Rings [ASME]
ASME B 18.27.3 (T4) - 1998 (R2017)
NA7 External Retaining Rings
20 Retaining Rings with Lugs for Shafts [DIN]
DIN 983 - 2021
Retaining Rings with Lugs for Shafts
21 NA14 External Self-locking Retaining Rings [ASME]
ASME B 18.27.5 (T6) - 1998 (R2017)
NA14 External Self-locking Retaining Rings
22 External Retaining Rings [JIS]
JIS B 2804 (CE-EX) - 2010
External Retaining Rings
23 Retaining Rings For Shaft - Type B [GB]
GB /T 894 (B) - 2017
Retaining Rings For Shaft - Type B
24 Grip Rings [GB]
GB 960 - 1986
Grip Rings
25 Circlips For B Shaft [GB]
GB /T 894.2 - 1986
Circlips For B Shaft
26 External Retaining Rings (Small Specification) [JIS]
JIS B 2804 (GR) - 2010
External Retaining Rings (Small Specification)
27 External retaining rings [JIS]
JIS B 2804 (CE-EX) - 2001
External retaining rings
28 Circlips for shaft [JIS]
JIS B 2804 (CE-EX) - 2001
Circlips for shaft
29 Circlips for shaft [JIS]
JIS B 2804 (CE-EX) - 1978
Circlips for shaft
30 Heavy Duty Push - On Fix For Shafts [YJT]
YJT 7036 (KS)
Heavy Duty Push - On Fix For Shafts
31 Rings for Shafts(Heavy Duty) D1460/AS/DSR [YJT]
YJT 7008 (D1460/AS/DSR)
Rings for Shafts(Heavy Duty) D1460/AS/DSR
32 Bowed Rings for Shafts M1401/AW [YJT]
YJT 7012 (M1401/AW)
Bowed Rings for Shafts M1401/AW
33 Circlips for shaft(imperial standard) (N1400/NA) [YJT]
YJT 7022 (N1400/NA)
Circlips for shaft(imperial standard) (N1400/NA)
34 Bowed Rings for shaft(imperial standard) (N1401/NAW) [YJT]
YJT 7023 (N1401/NAW)
Bowed Rings for shaft(imperial standard) (N1401/NAW)
35 Circlips for shaft (imperial standard)-v type (N 1408/NAV) [YJT]
YJT 7025 (N1408/NAV)
Circlips for shaft (imperial standard)-v type (N 1408/NAV)
36 Circlips for shaft(imperial standard) (N 1460/NAS) [YJT]
YJT 7026 (N1460/NAS)
Circlips for shaft(imperial standard) (N 1460/NAS)
37 Push-on Fix for Shafts (M1455/ZA/DTX) [YJT]
YJT 7034 (M1455/ZA/DTX)
Push-on Fix for Shafts (M1455/ZA/DTX)
38 Push-on Washers for Imperial Round Shaft - Stainless Steel [YJT]
YJT 6011
Push-on Washers for Imperial Round Shaft - Stainless Steel
39 Grip Rings For Shafts Without Grooves [YJT]
YJT 7037 (M1440/G)
Grip Rings For Shafts Without Grooves
40 Push-on Fix for Shafts (N1465/NZA) [YJT]
YJT 7038 (N1465/NZA)
Push-on Fix for Shafts (N1465/NZA)
41 Grip Rings For Shafts Without Grooves [YJT]
YJT 7039 (N1440/NG)
Grip Rings For Shafts Without Grooves
42 Push-on Washers for Metric Round Shaft - Merchanical Zinc-Plated [YJT]
YJT 6014
Push-on Washers for Metric Round Shaft - Merchanical Zinc-Plated
43 Push-on Washers for Imperial Round Shaft - Merchanical Zinc-Plated [YJT]
YJT 6013
Push-on Washers for Imperial Round Shaft - Merchanical Zinc-Plated
44 Push-on Washers for Metric Round Shaft - Stainless Steel [YJT]
YJT 6012
Push-on Washers for Metric Round Shaft - Stainless Steel
45 circlip for shaft -- Type SL [SN]
SN 421-683
circlip for shaft -- Type SL
46 Circlips for Shafts - Heavy Type [IS]
IS 3075 (-1) - 1986 (R1996)
Circlips for Shafts - Heavy Type
47 Circlips for Shafts - Normal Type [IS]
IS 3075 (-1) - 1986 (R1996)
Circlips for Shafts - Normal Type
48 Circlips For Shaft [CNS]
CNS 9074 - 1998
Circlips For Shaft
49 Push-on Spring Nuts (Inch series) - Round Arched [SAE]
SAE J 892 (F3) - 1996
Push-on Spring Nuts (Inch series) - Round Arched
50 Push-on Spring Nuts (Inch series) - Round-Flat [SAE]
SAE J 892 (F2) - 1996
Push-on Spring Nuts (Inch series) - Round-Flat
51 L-Rings For Shafts 983L/AL [YJT]
YJT 7004 (983L/AL)
L-Rings For Shafts 983L/AL
52 Circlips for shaft (v type) M1408/AV/DSI [YJT]
YJT 7013 (M1408/AV/DSI)
Circlips for shaft (v type) M1408/AV/DSI