Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [MJ/UNJ] MJ/UNJ threads

Internal Driving

External Driving

Locking Type

Shank

Point

EN 1665 (R) - 1997
Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) View Suppliers
EN 3006 - 1994
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1662 - 1997
Hexagon Bolts with Flange - Small Series View Suppliers
EN 1665 (S) - 1997
Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) View Suppliers
EN 3007 - 1996
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1677-2 - 2000 (+A1:2008)
Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8
EN 1667 - 1997
Prevailing Torque Type All-Metal Hexagon Nuts with Flange with Metric Fine Pitch Thread
EN 24014 - 1991
Hexagon Head Bolts - Product Grades A and B
EN 14219 (S) - 2003
Hexagon Bolts with Flange - Metric Fine Pitch Thread - Small Series - Full Shank (Standard Type)
EN 1661 - 1997
Hexagon Nuts with Flange
EN 14399-9 (HN) - 2018
High-Strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV - Nut Face Washers (HN)
EN 13411-5 (A4) - 2003
U-bolt Wire Rope Grips - Collar Nut
EN 14399-4 (Bolt) - 2015
High-Strength Structural Bolting Assemblies for Preloading - Part 4: System HV - Hexagon Bolts
EN 1677-3 - 2001 (+A1:2008)
Forged Steel Self-locking Hooks - Grade 8
EN 24016 - 1991
Hexagon Head Bolls: Product Grade C
EN 2884 - 2024
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
EN 28736 - 1992
Taper Pins with Internal Thread, Unhardened
EN 13411-5 (A3) - 2003
U-bolt Wire Rope Grips - U-bolt
EN 24018 - 1991
Hexagon Head Screws - Product Grade C
EN 28765 - 1992
Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B

Previous

1 2 3 4 5 6

Product Category

Automotive Bolts

Seat belt bolts, engine screws Hot-dip galvanized non-standard hex head bolts Turned part, battery clamp screws, external hex bolts

Threaded Inserts

Slotted Pins

Rings

E type retaining rings, push nuts for shaft External circlips, internal circlips Retaining clips for shaft, Snap rings for bearings

Closed End, Open End, Double Drum

Custom Rivet Nut, Break Pull Mandrel Hemlok, Outer Lock, Inner Lock, GB Clinching Nut, Self-Clinching Stud

Self-tapping, Self-drilling, Torx

Washer Head, Countersunk Head Button Head, Pan Head, Cheese Head DIN, ISO, ASMEB, JISB, ANSIB, Flanged

Nuts

Hex. nuts Thin nuts Flange nuts

Double End Stud, Threaded Rod

U Bolt Chamfered Threaded, SUS Marble GB, DIN

Washers

Conical contact washers, double fold self-locking washers External serrated lock washers, internal serrated lock washers Lock washers for slotted round, wave spring washers for bearing

Dowel Pin, Stepped Pin, Blind Pin

Non-Standard, Coiled Spring Pin GB/DIN/SNSI/JIS/ISO/ANSI, Eye Bolt Pin Alignment Dowel/Bushing

Leave a Message