Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [MJ/UNJ] MJ/UNJ threads

Internal Driving

External Driving

Locking Type

Shank

Point

EN 3007 - 1996
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 3006 - 1994
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1665 (R) - 1997
Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) View Suppliers
EN 1665 (S) - 1997
Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) View Suppliers
EN 1662 - 1997
Hexagon Bolts with Flange - Small Series View Suppliers
EN 24033 - 1991
Hexagon Nuts, Style 2 - Product Grades A and B
EN 2944 - 1998
Aerospace Series - Inserts, Screw Thread, Helical Coil, Self-Lockong, in Corrosion Resisting Steel FE-PA3004
EN 14219 (S) - 2003
Hexagon Bolts with Flange - Metric Fine Pitch Thread - Small Series - Full Shank (Standard Type)
EN 10230-1 (T2) - 2000
Circular, Flat and Flat Countersunk Head, Grooved Shank Nails
EN 14399-6 (Chamfered Washer) - 2005
High-Strength Structural Bolting Assemblies for Preloading - Part 6: Plain Chamfered Washers
EN 24034 - 1991
Hexagon Nuts - Product Grades C
EN 6081 - 2022
Aerospace Series - Rivet, Universal Head, Close Tolerance - Inch Series
EN 14219 (R) - 2003
Hexagon Bolts with Flange with Metric Fine Pitch Thread - Small Series - Reduced Shank(Type R)
EN 14399-10 (CS Bolt) - 2018
High-Strength Structural Bolting Assemblies for Preloading - System HRC - Bolt HRC with Countersunk Head
EN 3542 - 1998
Aerospace series - Inserts, Screw Thread, Helical Coil, Self-locking, in Heat Resisting Nickel Base Alloy NI-PH2801 (Inconel X750)
EN 14399-9 (DTI) - 2018
High-Strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV - Direct Tension Indicators for Bolt and Nut assemblies
EN ISO 8741 - 1997
Grooved Pins - Half-length Reverse-taper Grooved
EN 14399-7 (Cs bolt) - 2007
High-strength Structural Bolting Assemblies for Preloading - Part 7: System HR — Countersunk Head Bolt
EN 2884 - 1996
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
EN 4162 - 2016
Aerospace Series - Screws, 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - 1100 MPa (at Ambient Temperature)/235 °C

Previous

1 2 3 4 5 6

Product Category

Customized Screws

Stainless steel screws Chip-broad screws Machine screws

Rivet Screws

Blind rivets Inner hex screws Steel blind rivets

Rings

E type retaining rings, push nuts for shaft External circlips, internal circlips Retaining clips for shaft, Snap rings for bearings

Bolts&Screws

Hex bolts Hex socket cap screws Wheel bolts

Non-standard Fasteners

Non-standard washers Non-standard retaining rings Non-standard pins

Automotive Bolts

Seat belt bolts, engine screws Hot-dip galvanized non-standard hex head bolts Turned part, battery clamp screws, external hex bolts

Rivets

Rivet nuts Hitters Aluminium rivet nuts

Bolts

Hexagon bolts Hexagon socket-head cap screws Round head bolts

Customized Screws

Stainless steel screws Stainless steel self-tapping screws Carbon steel dry-wall screws

Non-standard Customized Parts

Positioning pins Standoffs/Broaching fasteners Plastic inserts/Panel fasteners

Leave a Message