Material

DIN 548 - 1986 Round nuts with set pin holes in side

Unit: mm

德标DIN 548 - 1986 DIN548 548DIN Round nuts with set pin holes in side

Screw Thread
d

M2.5

(M3.5)

M10

P	Pitch
d₁	min=nominal size
	max
d_k	max=nominal size
	min
k	max=nominal size
	min
t	min
	max
per 1000 units ≈ kg

0.4	0.45	0.5	0.6	0.7	0.8	1	1.25	1.5
1	1.2	1.5	1.5	1.5	2	2.5	3	3.5
1.14	1.34	1.64	1.64	1.64	2.14	2.64	3.14	3.68
5.5	7	8	9	10	12	14	18	22
5.2	6.64	7.64	8.64	9.64	11.57	13.57	17.57	21.48
2	2.2	2.5	3	3.5	4.2	5	6.5	8
1.75	1.95	2.25	2.75	3.2	3.9	4.7	6.14	7.64
1	1.3	1.3	1.8	1.8	2.3	2.8	3.3	3.8
1.4	1.7	1.7	2.2	2.2	2.7	3.2	3.8	4.3
0.31	0.55	0.79	1.21	1.78	2.96	4.7	9.95	18.7

Alternative history

DIN 548 - 1986 DIN 548 - 2007

Similar Standards

1	[GB] GB 810 - 1988	Small Round Nuts
2	[GB] GB 812 - 1988	Round Nuts Suppliers(2)
3	[GB] GB /T 9160.2 (KM) - 2017	Rolling Bearing Accessories - Locknuts - KM Series
4	[GB] GB /T 9160.2 (KML) - 2017	Rolling Bearing Accessories - Locknuts - KML Series
5	[GB] GB /T 9160.2 (HM) - 2017	Rolling Bearing Accessories - Locknuts - HM Series
6	[GB] GB /T 9160.2 (HML) - 2017	Rolling Bearing Accessories - Locknuts - HML Series
7	[GB] GB /T 9160.2 (MS) - 2017	Rolling Bearing - Locking Clips - MS Series
8	[GB] GB /T 9160.2 (MSL) - 2017	Rolling Bearing - Locking Clips - MSL Series
9	[GB] GB /T 9160.2 (KM) - 2006	Rolling Bearing Accessories - Locknuts - KM Series
10	[GB] GB /T 9160.2 (KML) - 2006	Rolling Bearing Accessories - Locknuts - KML Series
11	[GB] GB /T 9160.2 (HM) - 2006	en:Rolling Bearing Accessories - Locknuts - HM Series
12	[GB] GB /T 9160.2 (HML) - 2006	Rolling Bearing Accessories - Locknuts - HML Series
13	[GB] GB /T 9160.2 (MS) - 2006	Rolling Bearing - Locking Clips - MS Series
14	[GB] GB /T 9160.2 (MSL) - 2006	Rolling Bearing - Locking Clips - MSL Series
15	[GB] GB 815 - 1988	Round Nuts With Drilled Holes In One Face
16	[GB] GB 816 - 1988	Round Nuts With Set Pin Holes In Side
17	[GB] GB 817 - 1988	Slotted Round Nuts
18	[GB] GB 9160.3 (KM) - 1988	Rolling Bearing Accessories - Locknuts - KM Series
19	[GB] GB 9160.3 (KML) - 1988	Rolling Bearing Accessories - Locknuts - KML Series
20	[GB] GB 9160.3 (HM) - 1988	Rolling Bearing Accessories - Locknuts - HM Series
21	[GB] GB 9160.3 (HML) - 1988	Rolling Bearing Accessories - Locknuts - HML Series
22	[DIN] DIN 981 (HM) - 2009	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
23	[DIN] DIN 981 (KM) - 2009	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
24	[DIN] DIN 981 (KM) - 1993	Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
25	[DIN] DIN 981 (HM) - 1993	Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
26	[DIN] DIN 981 (KM) - 1983	Rolling bearings - Locknuts
27	[DIN] DIN 546 - 2010	Slotted Round Nuts
28	[DIN] DIN 548 - 2007	Round nuts with set pin holes in side
29	[DIN] DIN 547 - 2006	Round Nuts With Drilled Holes In One Face
30	[DIN] DIN 70852 - 1989	Groove Nuts
31	[DIN] DIN 546 - 1986	Slotted round nuts
32	[DIN] DIN 547 - 1986	Round nuts with drilled holes in one face
33	[DIN] DIN 1804 - 1971	Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
34	[DIN] DIN 1816 - 1971	Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
35	[NF] NF E 22-111 - 1969	Locknuts - Heavy Series
36	[NF] NF E 27-413 - 1959	Slotted Round Nuts
37	[CNS] CNS 4433 - 1993	Round Nuts With Set Pin Holes In Side
38	[CNS] CNS 4434 - 1993	Round Nuts With Drilled Holes In One Face
39	[CNS] CNS 4465 - 1978	Round Nuts