简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Small Round Nuts

GB 810 - 1988

Display drawing:

国标GB 810 - 1988 GB810 810GB Small Round Nuts
Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs
Default density g/cm3
×

Choose materials based on density.(g/cm3)

  • Carbon Steel 7.85
  • Stainless Steel 8.1
  • Stainless Steel 7.95
  • Stainless Steel 7.7
  • Titanium Alloy 4.5
  • Aluminum Alloy 2.8
  • Copper 8.89


Select here or enter material density on the calculation page.
Thread Size
d
M10
× 1 		M12
× 1.25 		M14
× 1.5 		M16
× 1.5 		M18
× 1.5 		M20
× 1.5 		M22
× 1.5 		M24
× 1.5 		M27
× 1.5 		M30
× 1.5 		M33
× 1.5 		M36
× 1.5 		M39
× 1.5 		M42
× 1.5
dk
m
h max
min
t max
min
c
c1
per 1000 units ≈ kg
20 22 25 28 30 32 35 38 42 45 48 52 55 58
6 6 6 6 6 6 8 8 8 8 8 8 8 8
4.3 4.3 4.3 4.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 6.3 6.3 6.3
4 4 4 4 5 5 5 5 5 5 5 6 6 6
2.6 2.6 2.6 2.6 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.6 3.6 3.6
2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1 1
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
9.53 11 14.27 17.91 18.83 20.6 33.2 39.42 47.6 52.01 56.43 64.51 69.22 73.92
Thread Size
d
M45
× 1.5 		M48
× 1.5 		M52
× 1.5 		M56
× 2 		M60
× 2 		M64
× 2 		M68
× 2 		M72
× 2 		M76
× 2 		M80
× 2 		M85
× 2 		M90
× 2 		M95
× 2 		M100
× 2
dk
m
h max
min
t max
min
c
c1
per 1000 units ≈ kg
62 68 72 78 80 85 90 95 100 105 110 115 120 125
8 10 10 10 10 10 10 12 12 12 12 12 12 12
6.3 6.3 8.36 8.36 8.36 8.36 8.36 8.36 10.36 10.36 10.36 10.36 10.36 12.43
6 6 8 8 8 8 8 8 10 10 10 10 10 12
3.6 3.6 4.25 4.25 4.25 4.25 4.25 4.25 4.75 4.75 4.75 4.75 4.75 5.75
3 3 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 5
1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5
0.5 0.5 0.5 1 1 1 1 1 1 1 1 1 1 1
84.65 136.5 143.2 171.9 162.8 183 204.2 271.9 295.5 325 343.4 361.8 380.2 391.1
Thread Size
d
M105
× 2 		M110
× 2 		M115
× 2 		M120
× 2 		M125
× 2 		M130
× 2 		M140
× 2 		M150
× 2 		M160
× 3 		M170
× 3 		M180
× 3 		M190
× 3 		M200
× 3
dk
m
h max
min
t max
min
c
c1
per 1000 units ≈ kg
130 135 140 145 150 160 170 180 195 205 220 230 240
15 15 15 15 15 15 18 18 18 18 22 22 22
12.43 12.43 12.43 14.43 14.43 14.43 14.43 14.43 14.43 16.43 16.43 16.43 16.43
12 12 12 14 14 14 14 14 14 16 16 16 16
5.75 5.75 5.75 6.75 6.75 6.75 6.75 6.75 6.75 7.9 7.9 7.9 7.9
5 5 5 6 6 6 6 6 6 7 7 7 7
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5
497.7 520.7 543.7 549.8 572.8 740.5 954.8 1021 1299 1353 2041 2149 2257

Alternative history

GB /T 810 - 1988
Send Inquiry

Similar Standards

1 Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
2 Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread [DIN]
DIN 1816 - 1971 		Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
3 Round nuts with set pin holes in side [DIN]
DIN 548 - 2007 		Round nuts with set pin holes in side
4 Cargo lifting gear - Accessories and fittings for lifting - Round nuts [DIN]
DIN 82013 - 2010 		Cargo lifting gear - Accessories and fittings for lifting - Round nuts
5 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
6 Rolling bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling bearings - Locknuts
7 Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
8 Locknuts With 8 Slots [ISO]
ISO 2982-2 - 2013 		Locknuts With 8 Slots
9 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
10 Round nuts with drilled holes in one face [DIN]
DIN 547 - 1986 		Round nuts with drilled holes in one face
11 Removal Nut Dimensions Inch Design Series RN and ARN [ANSI]
ANSI /ABMA 8.2 - 1999 		Removal Nut Dimensions Inch Design Series RN and ARN
12 Round nuts with set pin holes in side [DIN]
DIN 548 - 1986 		Round nuts with set pin holes in side
13 Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
14 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
15 Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
16 Locknut With 4 Slots [ISO]
ISO 2982-2 - 2013 		Locknut With 4 Slots
17 Shaft collar axle flande mounting shaft collar [DIN]
DIN 703 - 1955 		Shaft collar axle flande mounting shaft collar
18 Slotted round nuts [DIN]
DIN 546 - 1986 		Slotted round nuts
19 Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
20 Round Nuts With Drilled Holes In One Face [DIN]
DIN 547 - 2006 		Round Nuts With Drilled Holes In One Face
21 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
22 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2006 		Rolling Bearing - Locking Clips - MSL Series
23 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
24 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
25 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
26 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
27 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
28 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
29 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
30 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
31 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
32 Round Nuts With Drilled Holes In One Face [GB]
GB 815 - 1988 		Round Nuts With Drilled Holes In One Face
33 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2006 		Rolling Bearing - Locking Clips - MS Series
34 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
35 Round Nuts With Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts With Set Pin Holes In Side
36 Locknuts with 4 slots [JIS]
JIS B 1554 (AN,HN/ANL,HNL) - 2016 		Locknuts with 4 slots
37 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
38 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
39 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2017 		Rolling Bearing - Locking Clips - MS Series
40 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2017 		Rolling Bearing - Locking Clips - MSL Series
41 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
42 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
43 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2006 		Rolling Bearing Accessories - Locknuts - KML Series
44 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
45 Locknuts with 8 slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 slots
46 Slotted round nuts, product grade A [GOST]
GOST 11871 - 1988 		Slotted round nuts, product grade A
47 Round Nuts With Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts With Set Pin Holes In Side
48 Round Nuts With Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts With Drilled Holes In One Face
49 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts