1 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T46) - 2013
|
Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws
|
2 |
|
[ASME/ANSI]
ASME/ANSI B 18.17 - 1968 (R1983)
|
Dimensions of Alternate Styles of Points for Thumb and Wing Screws
|
3 |
|
[ASME]
ASME B 18.3 (Table 18) - 2012
|
Dimensions of Hexagon Sockets
|
4 |
|
[ISO]
ISO 4757 - 1983
|
Cross recessed-H type
|
5 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T26) - 2013
|
Dimensions of Combination Slotted Truss Head Screws
|
6 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T4) - 2013
|
Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only)
|
7 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T25) - 2013
|
Recess Dimensions for Truss Head Screws
|
8 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T33) - 2013
|
Recess Dimensions for Indented Hex Washer Head Screws
|
9 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T44) - 2013
|
Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
|
10 |
|
[DIN]
DIN 7500 (-2) - 2016
|
Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters
|
11 |
|
[ASME]
ASME B 18.3 (Table 4) - 2012
|
Body and grip lengths for socket head cap screws
|
12 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T14) - 2013
|
Recess dimensions for Flat Countersunk Trim Head Screws
|
13 |
|
[DIN]
DIN 76-1 - 2016
|
Thread run-outs and thread undercuts
|
14 |
|
[ISO]
ISO 4755 - 1983
|
Fasteners—Thread undercuts for external metric ISO
|
15 |
|
[ISO]
ISO 7378 - 1983
|
Fasteners—Bolts,screws and studs—Split pins holes and wire holes
|
16 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T28) - 2013
|
Recess Dimensions for Binding Head Screws (Machine Screws Only)
|
17 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T16) - 2013
|
Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws
|
18 |
|
[DIN]
DIN 34824 - 2007
|
12 point socket for bolts and screws
|
19 |
|
[ISO]
ISO 7994 - 1985
|
Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series
|
20 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T39) - 2013
|
Recess Dimensions for Round Washer Head Screws
|
21 |
|
[ASME]
ASME B 18.6.4 (BF/BT) - 1998
|
Type BF and BT, Thread Cutting Tapping Screws [Table 7]
|
22 |
|
[ISO]
ISO 273 - 1979
|
Fasteners─Clearance holes for bolts and screws
|
23 |
|
[ASME]
ASME B 18.6.4 (D/F/G/T) - 1998
|
Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8]
|
24 |
|
[DIN EN]
DIN EN 20273 - 1992
|
Fasteners - Clearanc holes for bolts and screws
|
25 |
|
[DIN]
DIN 7500-2 - 1984
|
Thread rolling screws for ISO metric thread guidelinge values for hole diameters
|
26 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T34) - 2013
|
Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws
|
27 |
|
[ISO]
ISO 7721-2 - 1990
|
Countersunk flat hed screws—Part 2:Penetration depth of cross recesses
|
28 |
|
[ISO]
ISO 13444 - 2012
|
Dimensioning and indication of knurling
|
29 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T45) - 2013
|
Dimensions of Type TRS Tapping Screws
|
30 |
|
[ISO]
ISO 6157-3 - 1988
|
Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements
|
31 |
|
[ISO]
ISO 7721 - 1983
|
Countersunk head screws—Head configuration and guaging
|
32 |
|
[EN]
EN 10058 - 2018
|
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
|
33 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T10) - 2013
|
Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws
|
34 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T47) - 2013
|
Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws
|
35 |
|
[ISO]
ISO 6157-1 - 1988
|
Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements
|
36 |
|
[ISO]
ISO 3508 - 1976
|
Thread run-out for fasteners with thread in accordance with ISO 261 and ISO 262
|
37 |
|
[DIN]
DIN 7975 - 2016
|
Tapping screw connections - Guideline values for core hole diameters and use
|
38 |
|
[DIN]
DIN 82 - 1973
|
Knurle
|
39 |
|
[ISO]
ISO 4753 - 2011
|
Fasteners—Ends of parts with external ISO metric thread
|
40 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T6) - 2013
|
Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
|
41 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T2) - 2013
|
Recess Dimensions for Flat 82° Countersunk Head Screws
|
42 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T48) - 2013
|
Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
|
43 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T19) - 2013
|
Recess Dimensions for Pan Head Screws (Types IA, III, and VI)
|
44 |
|
[ISO]
ISO 272 - 1982
|
Fasteners—Hexagon products—Widths across flats
|
45 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T37) - 2013
|
Recess Dimensions for Combination Slotted Round Head Screws
|
46 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T31) - 2013
|
Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws
|
47 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T43) - 2013
|
Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
|
48 |
|
[ASME]
ASME B 18.6.5M - 2000 (R2010)
|
Metic threads and points for tapping screws
|
49 |
|
[EN]
EN 27721 - 1991
|
Countersunk head screws - Head configuration and gauging
|
50 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T36) - 2013
|
Recess Dimensions for Round Head Screws
|
51 |
|
[DIN]
DIN 332 (-1) - 1986
|
60° centre holes - Types R. A. B. and C
|
52 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T22) - 2013
|
Recess Dimensions for Fillister Head Screws
|
53 |
|
[ISO]
ISO 1302 - 2002
|
Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation
|
54 |
|
[DIN]
DIN 78 - 1983
|
Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13
|
55 |
|
[ISO]
ISO 1051 - 1999
|
Rivet shank diameters
|
56 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T8) - 2013
|
Recess Dimensions for Oval 82° Countersunk Head Screws
|
57 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T30) - 2013
|
Recess Dimensions for Indented Regular and Large Hex Head Screws
|
58 |
|
[ISO]
ISO 4757 - 1983
|
Cross recessed-Z type
|
59 |
|
[ISO]
ISO 6157-2 - 1995
|
Fasteners—Surface discontinuities— Part2:Nuts
|
60 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T12) - 2013
|
Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws
|
61 |
|
[ISO]
ISO 10664 - 2005
|
Hexalobular internal driving feature for bolts and screws
|
62 |
|
[GB]
GB /T 6403.3 - 2008
|
Knurl
|
63 |
|
[GB]
GB 5277 - 1985
|
Fasteners - Clearanc holes for bolts and screws
|
64 |
|
[GB]
GB /T 152.2 - 2014
|
Countersinks for countersunk head screws
|
65 |
|
[GB]
GB /T 145 - 2001
|
Center holes
|
66 |
|
[GB]
GB 944.1 - 1985
|
Cross recesses for screws
|
67 |
|
[GB]
GB /T 1563 - 2017
|
Taper keys of keyways
|
68 |
|
[GB]
GB /T 13807.1 - 2008
|
Connections with waisted stud - Tape classification
|
69 |
|
[GB]
GB /T 1095 - 2003
|
Square and rectangular keyways
|
70 |
|
[JIS]
JIS B 1603 - 1995
|
Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection
|
71 |
|
[GB]
GB 3104 - 1982
|
Fastners - Widths across flats of hexagon products
|
72 |
|
[GB]
GB /T 6188 - 2017
|
Hexalobular internal driving feature for bolts and screws
|
73 |
|
[JIS]
JIS B 1215 (T6) - 1976
|
length of semi-tubular rivets
|
74 |
|
[GB]
GB /T 6188 - 2008
|
Hexalobular internal driving feature for bolts and screws
|
75 |
|
[GB]
GB 18194 - 2000
|
Rivet shank diameters (except blind rivets)【ISO 1051:1999】
|
76 |
|
[GB]
GB /T 2 - 2016
|
Fasteners-Ends of parts with external thread(ISO 4753:2011, MOD)
|
77 |
|
[GB]
GB 152.1 - 1988
|
Clearance holes for rivets
|
78 |
|
[GB]
GB 5278 - 1985
|
Fasteners - Split pin holes and wire holes (ISO 7378:1983)
|
79 |
|
[GB]
GB /T 5279 - 1985
|
Countersunk head screws - Head configuration and gauging
|
80 |
|
[GB]
GB /T 5652 - 2008
|
Flared couplings - Flared end
|
81 |
|
[GB]
GB /T 20330 - 2006
|
Drill diameter for use prior to tapping screw threads
|
82 |
|
[GB]
GB 707 - 1988
|
Hot-rolled channel steel
|
83 |
|
[GB]
GB 6189 - 1986
|
Hexagon lobuar for fasteners - Type E
|
84 |
|
[GB]
GB /T 12520 - 1990
|
Offset cruciform recess fro rotary fastening devices
|
85 |
|
[GB]
GB /T 3106 - 2016
|
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)
|
86 |
|
[GB]
GB /T 16823.1 - 1997
|
Stress area and bearing area for threaded fasteners
|
87 |
|
[GB]
GB /T 5279.2 - 1997
|
Countersunk flat head screws - Part2: Penetration depth of cross recesses
|
88 |
|
[JIS]
JIS B 1015 - 2018
|
Hexalobular internal driving feature for bolts and screws
|
89 |
|
[GB]
GB /T 3105 - 2002
|
General purpose bolts and screws - Radius under the head
|
90 |
|
[GB]
GB /T 1098 - 2003
|
Woodruff keyways
|