简体 | 繁體 | FastenerExpo |

Torlerances for fasteners - Plain washers

GB /T 3103.3 - 2020

Display drawing:

国标GB /T3103.3 - 2020 GB3103.3 3103.3GB Torlerances for fasteners - Plain washers

Similar Standards

1 Hot rolled steel plate 3 mm thick or above Tolerances on dimensions, shape and mass [DIN EN]
DIN EN 10029 - 1991
Hot rolled steel plate 3 mm thick or above Tolerances on dimensions, shape and mass
2 Dimensions and tolerances of bright steel products [EN]
EN 10278 - 1999
Dimensions and tolerances of bright steel products
3 Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications [ISO]
ISO 2768-2 - 1989
Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications
4 Length tolerances for bolts [ASME/ANSI]
ASME/ANSI B 18.2.1 - 2012
Length tolerances for bolts
5 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications [ISO]
ISO 2768-1 - 1989
General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
6 Tolerances for fasteners - Part 3: Plain washers for bolts,screw and nuts - Product grades A, C and F [ISO]
ISO 4759-3 - 2016
Tolerances for fasteners - Part 3: Plain washers for bolts,screw and nuts - Product grades A, C and F
7 Tolerances for fasteners— Part1:Bolts,screws,studs and nuts—Product grades A,B and C [ISO]
ISO 4759-1 - 2000
Tolerances for fasteners— Part1:Bolts,screws,studs and nuts—Product grades A,B and C
8 Tolerances for fasteners - Part 2 : Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics [ISO]
ISO 4759-2 - 1979
Tolerances for fasteners - Part 2 : Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics
9 Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications [GB]
GB /T 1184 - 1996
Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications
10 Tolerances for fasteners Bolts 、screws and nuts for fine mechanics [GB]
GB 3103.2 - 1982
Tolerances for fasteners Bolts 、screws and nuts for fine mechanics
11 Tolerances for fasteners-Plain washers [GB]
GB /T 3103.3 - 2000
Tolerances for fasteners-Plain washers
12 Geometrical Product Specifications (GPS) - ISO code system for tolerances  on linear sizes  - Part 1: Basis of tolerances, deviations and fits [GB]
GB /T 1800.1 - 2020
Geometrical Product Specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
13 Tolerances for fasteners -  Bolts,screws,studs and nuts [GB]
GB /T 3103.1 - 2002
Tolerances for fasteners - Bolts,screws,studs and nuts
14 Tolerences for fasteners-Bolt/nut assemblies for service temperatures from -200℃~+700℃ [GB]
GB /T 3103.4 - 2014
Tolerences for fasteners-Bolt/nut assemblies for service temperatures from -200℃~+700℃
15 Steel die forgings - Tolerance and machining allowance [GB]
GB /T 12362 - 2016
Steel die forgings - Tolerance and machining allowance
16 Cone Tolerance [GB]
GB /T 11334 - 2005
Cone Tolerance
17 Geometrical product specifications ( GPS ) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts [GB]
GB /T 1800.2 - 2020
Geometrical product specifications ( GPS ) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
18 Technical Supply Conditions For Threaded Steel Fasteners - Part 2 Tolerances For Fasteners - Bolts, Screws, studs And Nuts - Product Grades A, B And C [IS]
IS 1367 (-2) - 2002
Technical Supply Conditions For Threaded Steel Fasteners - Part 2 Tolerances For Fasteners - Bolts, Screws, studs And Nuts - Product Grades A, B And C