Metric Square Keys

ASME/ANSI B 18.25.1M - 1996

Display drawing:

Scan QR Code

Show on Mobile terminal.
Share with friends!

Similar Standards

1	[DIN] DIN 6885-1 (A) - 2021	Parallel Keys, Deep Pattern - Type A View Suppliers
2	[DIN] DIN 6885 (A) - 1968	Parallel Keys, Deep Pattern - Type A View Suppliers
3	[DIN] DIN 6880 (A) - 2011	Square Key
4	[DIN] DIN 6885-1 (J) - 2021	Parallel Keys, with Taper and One Step Hole for Clamping Sleeve - Type J
5	[DIN] DIN 6885-1 (F) - 2021	Parallel Keys, with Two Step Bores for Fixation Screw - Type F
6	[DIN] DIN 6323 (A) - 2003	Slot Stones, Loose - Form A
7	[DIN] DIN 6885-1 (C) - 2021	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
8	[DIN] DIN 6880 (B) - 2011	Rectangular Key
9	[DIN] DIN 6885-1 (H) - 2021	Parallel Keys, with Taper and Two Step Bore for Fixation Screw - Type H
10	[DIN] DIN 6880 - 1975	Square Key
11	[DIN] DIN 6880 - 1975	Rectangular Key
12	[DIN] DIN 6885 (D) - 1968	Parallel Keys, with Step Bore Fore Fixation Screw - Type D
13	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998 (R2008)	Metric Square and Pectang-Ular Keys
14	[DIN] DIN 6880 - 1975	Flat Rectangular Key
15	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998	Metric Interference Fit Flat Key
16	[DIN] DIN 6885 (B) - 1968	Parallel Keys, Deep Pattern - Type B
17	[DIN] DIN 6885 (J) - 1968	Parallel Keys, with Taper and One Step Hole for Clamping Sleeve - Type J
18	[DIN] DIN 6323 (C) - 2003	Slot Stones, Loose - Form C
19	[DIN] DIN 6885 (F) - 1968	Parallel Keys, with Two Step Bores for Fixation Screw - Type F
20	[DIN] DIN 6885-1 (G) - 2021	Parallel Keys, with Taper and One Step Bore for Fixation Screw - Type G
21	[DIN] DIN 6323 (B) - 2003	Slot Stones, Loose - Form B
22	[DIN] DIN 6885-1 (B) - 2021	Parallel Keys, Deep Pattern - Type B
23	[DIN] DIN 6885-1 (D) - 2021	Parallel Keys, with Step Bore Fore Fixation Screw - Type D
24	[DIN] DIN 6885 (C) - 1968	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
25	[DIN] DIN 6885-1 (E) - 2021	Parallel Keys, with Two Step Bores for Fixation Screw - Type E
26	[DIN] DIN 6885 (E) - 1968	Parallel Keys, with Two Step Bores For Fixation Screw - Type E
27	[DIN] DIN 6885 (H) - 1968	Parallel Keys, with Taper and Two Step Bore for Fixation Screw - Type H
28	[DIN] DIN 6885 (G) - 1968	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
29	[DIN] DIN 6880 (C) - 2011	Flat Rectangular Key
30	[ISO] ISO 2491 - 1974	Thin Parallel Keys
31	[UNI] UNI 6605 - 1969	Parallel Keys - Type III
32	[JIS] JIS B 1301 (P/PS) - 1996	Parallel Key
33	[GB] GB /T 1567 - 2003	Sguare and Rectangular Thin Keys
34	[UNI] UNI 6604 - 1969	Flat Key
35	[UNI] UNI 6605 - 1969	Parallel Keys - Type V
36	[GB] GB /T 1096 - 1979	Square and Rectangular Keys
37	[GB] GB 1097 - 1979	Square and Rectangular Keys
38	[UNI] UNI 6605 - 1969	Parallel Keys - Type IV
39	[UNI] UNI 7510 - 1976	Thin Parallel Keys
40	[UNI] UNI 6605 - 1969	Parallel Keys - Type II
41	[UNI] UNI 6605 - 1969	Parallel Keys - Type VI
42	[UNI] UNI 6605 - 1969	Parallel Keys - Type I
43	[GB] GB 1567 - 1979	Sguare and Rectangular Thin Keys
44	[NF] NF E 22-177 - 1987	Parallel Keys
45	[GB] GB /T 1097 - 2003	Square and Rectangular Keys
46	[GB] GB /T 1096 - 2003	Square And Rectangular Keys
47	[GOST] GOST 8787 - 1968	Flat Key
48	[GOST] GOST 23360 - 1978	Keys Couplings with Prismatic Keys
49	[IS] IS 2048 (A) - 1983	Type A - Keys with Both Ends Round
50	[IS] IS 2048 (B) - 1983	Type B - Keys with Both Ends Square
51	[IS] IS 2048 (C) - 1983	Type C - Keys with Both Ends Round with Hole for One Retaining Screw
52	[IS] IS 2048 (D) - 1983	Type D - Keys with Both Ends Square with Hole for One Retaining Screw
53	[IS] IS 2048 (E) - 1983	Type E - Keys with Both Ends Round with Holes for Two Retaining Screws
54	[IS] IS 2048 (F) - 1983	Type F - Keys with Both Ends Square with Holes for Two Retaining Screws
55	[IS] IS 2048 (G) - 1983	Type G - Keys with Both Ends Square with Chamfer and Hole for One Retaining Screw
56	[IS] IS 2048 (H) - 1983	Type H - Keys with Both Ends Square with Chamfer and Holes for Two Retaining Screws
57	[IS] IS 2048 (J) - 1983	Type J - Keys with Both Ends Square with Chamfer and Hole for One Spring Dowel Sleeve