Metric square keys

ASME/ANSI B 18.25.1M - 1996

Display drawing:

Scan QR Code

Show on Mobile terminal.
Share with friends!

Similar Standards

1	[DIN] DIN 6885-1 (A) - 2021	Parallel Keys, Deep Pattern - Type A View Suppliers
2	[DIN] DIN 6885 (A) - 1968	Parallel Keys, Deep Pattern - Type A View Suppliers
3	[DIN] DIN 6885 (B) - 1968	Parallel Keys, Deep Pattern - Type B
4	[DIN] DIN 6880 (B) - 2011	Rectangular Key
5	[DIN] DIN 6885-1 (G) - 2021	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
6	[DIN] DIN 6880 - 1975	Rectangular Key
7	[DIN] DIN 6885 (G) - 1968	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
8	[DIN] DIN 6880 (C) - 2011	Flat Rectangular Key
9	[DIN] DIN 6323 (C) - 2003	Slot stones, loose - Form C
10	[DIN] DIN 6885 (C) - 1968	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
11	[DIN] DIN 6880 - 1975	Square Key
12	[DIN] DIN 6885 (F) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
13	[DIN] DIN 6885-1 (F) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
14	[DIN] DIN 6885-1 (H) - 2021	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
15	[DIN] DIN 6885 (D) - 1968	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
16	[DIN] DIN 6885-1 (E) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
17	[DIN] DIN 6323 (A) - 2003	Slot stones, loose - Form A
18	[DIN] DIN 6885 (E) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
19	[DIN] DIN 6880 - 1975	Flat Rectangular Key
20	[DIN] DIN 6885-1 (B) - 2021	Parallel Keys, Deep Pattern - Type B
21	[DIN] DIN 6885 (H) - 1968	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
22	[DIN] DIN 6885 (J) - 1968	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
23	[DIN] DIN 6885-1 (D) - 2021	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
24	[DIN] DIN 6885-1 (C) - 2021	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
25	[DIN] DIN 6880 (A) - 2011	Square Key
26	[DIN] DIN 6885-1 (J) - 2021	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
27	[DIN] DIN 6323 (B) - 2003	Slot stones, loose - Form B
28	[ISO] ISO 2491 - 1974	Thin Parallel Keys
29	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998	Metric Interference Fit Flat Key
30	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998 (R2008)	Metric Square And Pectang-Ular Keys
31	[UNI] UNI 6605 - 1969	Parallel keys - Type VI
32	[GB] GB /T 1096 - 2003	Square And Rectangular Keys
33	[UNI] UNI 6605 - 1969	Parallel keys - Type IV
34	[GB] GB /T 1096 - 1979	Square and Rectangular keys
35	[GB] GB /T 1567 - 2003	Sguare And Rectangular Thin Keys
36	[UNI] UNI 6605 - 1969	Parallel keys - Type III
37	[UNI] UNI 7510 - 1976	Thin parallel keys
38	[UNI] UNI 6605 - 1969	Parallel keys - Type I
39	[UNI] UNI 6605 - 1969	Parallel keys - Type V
40	[UNI] UNI 6605 - 1969	Parallel keys - Type II
41	[GB] GB 1097 - 1979	Square And Rectangular Keys
42	[UNI] UNI 6604 - 1969	Flat key
43	[GB] GB /T 1097 - 2003	Square And Rectangular Keys
44	[GB] GB 1567 - 1979	Sguare And Rectangular Thin Keys
45	[GOST] GOST 23360 - 1978	Keys couplings with prismatic Keys
46	[IS] IS 2048 (A) - 1983	Type A - Keys with both ends round
47	[IS] IS 2048 (B) - 1983	Type B - Keys with both ends square
48	[IS] IS 2048 (C) - 1983	Type C - keys with both ends round with hole for one retaining screw
49	[IS] IS 2048 (D) - 1983	Type D - keys with both ends square with hole for one retaining screw
50	[IS] IS 2048 (E) - 1983	Type E - Keys with both ends round with holes for two retaining screws
51	[IS] IS 2048 (F) - 1983	Type F - Keys with both ends square with holes for two retaining screws
52	[IS] IS 2048 (G) - 1983	Type G - keys with both ends square with chamfer and hole for one retaining screw
53	[IS] IS 2048 (H) - 1983	Type H - Keys with both ends square with chamfer and holes for two retaining screws
54	[IS] IS 2048 (J) - 1983	Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve