About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
DIN 82 - 1973 Knurle DIN 82 - 1973 Knurle DIN 82 - 1973 Knurle

Knurle

DIN 82 - 1973

Display drawing:

德标DIN 82 - 1973 DIN82 82DIN Knurle

Scan QR Code

Show on Mobile terminal.
Share with friends!
Send Inquiry

Similar Standards

1 60° centre holes - Types R. A. B. and C [DIN]
DIN 332 (-1) - 1986 		60° centre holes - Types R. A. B. and C
2 Body and grip lengths for socket head cap screws [Table 4] [ASME]
ASME B 18.3 (Table 4) - 2012 		Body and grip lengths for socket head cap screws [Table 4]
3 Dimensions of Hexagon Sockets [Table 18] [ASME]
ASME B 18.3 (Table 18) - 2012 		Dimensions of Hexagon Sockets [Table 18]
4 Tapping screw connections - Guideline values for core hole diameters and use [DIN]
DIN 7975 - 2016 		Tapping screw connections - Guideline values for core hole diameters and use
5 Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.2.2-1) - 2024 		Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
6 Metic threads and points for tapping screws [ASME]
ASME B 18.6.5M - 2000 (R2010) 		Metic threads and points for tapping screws
7 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2005 		Hexalobular internal driving feature for bolts and screws
8 Copper tubes of circular section - Dimensions [ISO]
ISO 274 - 1975 		Copper tubes of circular section - Dimensions
9 Type TRS Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.3-1) - 2024 		Type TRS Tapping Screws
10 Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T44) - 2013 		Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
11 Dimensions of Alternate Styles of Points for Thumb and Wing Screws [ASME/ANSI]
ASME/ANSI B 18.17 - 1968 (R1983) 		Dimensions of Alternate Styles of Points for Thumb and Wing Screws
12 Fasteners—Thread undercuts for external metric ISO [ISO]
ISO 4755 - 1983 		Fasteners—Thread undercuts for external metric ISO
13 Fasteners—Hexagon products—Widths across flats [ISO]
ISO 272 - 1982 		Fasteners—Hexagon products—Widths across flats
14 Thread rolling screws for ISO metric thread guidelinge values for hole diameters [DIN]
DIN 7500-2 - 1984 		Thread rolling screws for ISO metric thread guidelinge values for hole diameters
15 Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends [ISO]
ISO 11926-3 - 1995 		Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends
16 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring [ISO]
ISO 6149-1 - 2022 		Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring
17 Thread run-outs and thread undercuts [DIN]
DIN 76-1 - 2016 		Thread run-outs and thread undercuts
18 Aerospace series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard [EN]
EN 3044 - 1998 		Aerospace series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard
19 Fasteners─Clearance holes for bolts and screws [ISO]
ISO 273 - 1979 		Fasteners─Clearance holes for bolts and screws
20 Thread run-out for fasteners with thread in accordance with ISO 261 and ISO 262 [ISO]
ISO 3508 - 1976 		Thread run-out for fasteners with thread in accordance with ISO 261 and ISO 262
21 Rivet shank diameters [ISO]
ISO 1051 - 1999 		Rivet shank diameters
22 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports [ISO]
ISO 9974-1 - 1996 		Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
23 Fasteners - Clearanc holes for bolts and screws [DIN EN]
DIN EN 20273 - 1992 		Fasteners - Clearanc holes for bolts and screws
24 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) [ISO]
ISO 9974-3 - 1996 		Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)
25 General purpose bolts and screws─Metric series─Radii under the head [ISO]
ISO 885 - 2000 		General purpose bolts and screws─Metric series─Radii under the head
26 Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.2.1-1) - 2024 		Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
27 Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T43) - 2013 		Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
28 Type BF and BT, Thread Cutting Tapping Screws [Table 7] [ASME]
ASME B 18.6.4 (BF/BT) - 1998 (R2005) 		Type BF and BT, Thread Cutting Tapping Screws [Table 7]
29 12 point socket for bolts and screws [DIN]
DIN 34824 - 2007 		12 point socket for bolts and screws
30 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) [ISO]
ISO 9974-2 - 1996 		Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)
31 Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters [DIN]
DIN 7500 (-2) - 2016 		Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters
32 Cross recessed-H type [ISO]
ISO 4757 - 1983 		Cross recessed-H type
33 Countersunk head screws—Head configuration and guaging [ISO]
ISO 7721 - 1983 		Countersunk head screws—Head configuration and guaging
34 Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8] [ASME]
ASME B 18.6.4 (D/F/G/T) - 1998 (R2005) 		Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8]
35 Dimensions of Type TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T45) - 2013 		Dimensions of Type TRS Tapping Screws
36 Dimensioning and indication of knurling [ISO]
ISO 13444 - 2012 		Dimensioning and indication of knurling
37 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape [EN]
EN 10131 - 2006 		Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
38 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions [EN]
EN 10058 - 2018 		Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
39 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports [ISO]
ISO 1179-1 - 2013 		Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
40 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2014 		Hexalobular internal driving feature for bolts and screws
41 Fasteners—Surface discontinuities— Part2:Nuts [ISO]
ISO 6157-2 - 1995 		Fasteners—Surface discontinuities— Part2:Nuts
42 Recess Dimensions for Flat 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T2) - 2013 		Recess Dimensions for Flat 82° Countersunk Head Screws
43 Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements [ISO]
ISO 6157-1 - 1988 		Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements
44 Aerospace - Spline drives - Wrenching configuration - Metric series [ISO]
ISO 7403 - 1998 		Aerospace - Spline drives - Wrenching configuration - Metric series
45 Countersunk flat hed screws—Part 2:Penetration depth of cross recesses [ISO]
ISO 7721-2 - 1990 		Countersunk flat hed screws—Part 2:Penetration depth of cross recesses
46 Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements [ISO]
ISO 6157-3 - 1988 		Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements
47 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) [ISO]
ISO 1179-4 - 2007 		Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
48 Cross recessed-Z type [ISO]
ISO 4757 - 1983 		Cross recessed-Z type
49 Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T48) - 2013 		Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
50 Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation [ISO]
ISO 1302 - 2002 		Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation
51 Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series [ISO]
ISO 7994 - 1985 		Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series
52 Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws [ASME]
ASME B 18.6.3 (T4.11.1-1) - 2024 		Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
53 Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13 [DIN]
DIN 78 - 1983 		Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13
54 Fasteners—Ends of parts with external ISO metric thread [ISO]
ISO 4753 - 2011 		Fasteners—Ends of parts with external ISO metric thread
55 Countersunk head screws - Head configuration and gauging [EN]
EN 27721 - 1991 		Countersunk head screws - Head configuration and gauging
56 Fasteners-Ends of parts with external thread（ISO 4753:2011, MOD） [GB]
GB /T 2 - 2016 		Fasteners-Ends of parts with external thread（ISO 4753:2011, MOD）
57 Countersinks for countersunk head screws [GB]
GB /T 152.2 - 2014 		Countersinks for countersunk head screws
58 Hexalobular internal driving feature for bolts and screws [JIS]
JIS B 1015 - 2018 		Hexalobular internal driving feature for bolts and screws
59 Countersunk head screws - Head configuration and gauging [GB]
GB /T 5279 - 1985 		Countersunk head screws - Head configuration and gauging
60 Clearance holes for rivets [GB]
GB 152.1 - 1988 		Clearance holes for rivets
61 Stress area and bearing area for threaded fasteners [GB]
GB /T 16823.1 - 1997 		Stress area and bearing area for threaded fasteners
62 Square and rectangular keyways [GB]
GB /T 1095 - 2003 		Square and rectangular keyways
63 Flared couplings - Flared end [GB]
GB /T 5652 - 2008 		Flared couplings - Flared end
64 Rivet Shank Diameters (Except Blind Rivets) [ISO 1051:1999] [GB]
GB 18194 - 2000 		Rivet Shank Diameters (Except Blind Rivets) [ISO 1051:1999]
65 Taper keys of keyways [GB]
GB /T 1563 - 2017 		Taper keys of keyways
66 Connections with waisted stud - Tape classification [GB]
GB /T 13807.1 - 2008 		Connections with waisted stud - Tape classification
67 Woodruff keyways [GB]
GB /T 1098 - 2003 		Woodruff keyways
68 Offset cruciform recess fro rotary fastening devices [GB]
GB /T 12520 - 1990 		Offset cruciform recess fro rotary fastening devices
69 Fasteners - Clearanc holes for bolts and screws [GB]
GB 5277 - 1985 		Fasteners - Clearanc holes for bolts and screws
70 Knurl [GB]
GB /T 6403.3 - 2008 		Knurl
71 General purpose bolts and screws - Metric series -- Radii under the head [JIS]
JIS B 1005 - 2003 		General purpose bolts and screws - Metric series -- Radii under the head
72 Tapping rivats - Thread and end [UNI]
UNI 7345 - 1974 		Tapping rivats - Thread and end
73 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2008 		Hexalobular internal driving feature for bolts and screws
74 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2017 		Hexalobular internal driving feature for bolts and screws
75 Center holes [GB]
GB /T 145 - 2001 		Center holes
76 Knurling [JIS]
JIS B 0951 - 1962 		Knurling
77 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD) [GB]
GB /T 3106 - 2016 		Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)
78 Countersunk flat head screws - Part2: Penetration depth of cross recesses [GB]
GB /T 5279.2 - 1997 		Countersunk flat head screws - Part2: Penetration depth of cross recesses
79 Hexagon lobuar for fasteners - Type E [GB]
GB 6189 - 1986 		Hexagon lobuar for fasteners - Type E
80 Hot-rolled channel steel [GB]
GB 707 - 1988 		Hot-rolled channel steel
81 General purpose bolts and screws - Radius under the head [GB]
GB /T 3105 - 2002 		General purpose bolts and screws - Radius under the head
82 Cross recesses for screws [GB]
GB 944.1 - 1985 		Cross recesses for screws
83 Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection [JIS]
JIS B 1603 - 1995 		Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection
84 Fasteners - Split pin holes and wire holes （ISO 7378:1983） [GB]
GB 5278 - 1985 		Fasteners - Split pin holes and wire holes （ISO 7378:1983）
85 Fastners - Widths across flats of hexagon products [GB]
GB 3104 - 1982 		Fastners - Widths across flats of hexagon products
86 Drill diameter for use prior to tapping screw threads [GB]
GB /T 20330 - 2006 		Drill diameter for use prior to tapping screw threads
87 Cross Recesses For Screws [IS]
IS 7478 - 2011 		Cross Recesses For Screws