简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:inch

Dimensions of Alternate Styles of Points for Thumb and Wing Screws

ASME/ANSI B 18.17 - 1968 (R1983)

Display drawing:

美标ASME/ANSI B18.17 - 1968 (R1983) ASME/A Dimensions of Alternate Styles of Points for Thumb and Wing Screws
Code
4# 6# 8# 10# 12# 1/4 5/16 3/8 7/16 1/2 5/8
d thread diameter
O Max
Min
P Max
Min
L1 Max
Min
R Max
Min
0.1120 0.1380 0.1640 0.1900 0.2160 0.2500 0.3125 0.3750 0.4375 0.5000 0.6350
0.061 0.074 0.087 0.102 0.115 0.132 0.172 0.212 0.252 0.291 0.371
0.051 0.064 0.076 0.088 0.101 0.118 0.156 0.194 0.232 0.270 0.347
0.075 0.092 0.109 0.127 0.144 0.156 0.203 0.250 0.297 0.344 0.469
0.070 0.087 0.103 0.120 0.137 0.149 0.195 0.241 0.287 0.334 0.456
0.061 0.075 0.085 0.095 0.115 0.130 0.161 0.193 0.224 0.255 0.321
0.051 0.065 0.075 0.085 0.105 0.120 0.151 0.183 0.214 0.245 0.305
0.099 0.140 0.156 0.172 0.188 0.219 0.256 0.312 0.359 0.406 0.500
0.084 0.109 0.125 0.141 0.156 0.188 0.234 0.281 0.328 0.375 0.469
Send Inquiry

Similar Standards

1 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2014 		Hexalobular internal driving feature for bolts and screws
2 Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements [ISO]
ISO 6157-3 - 1988 		Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements
3 Metic threads and points for tapping screws [ASME]
ASME B 18.6.5M - 2000 (R2010) 		Metic threads and points for tapping screws
4 Recess Dimensions for Indented Regular and Large Hex Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T30) - 2013 		Recess Dimensions for Indented Regular and Large Hex Head Screws
5 Dimensions of Type TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T45) - 2013 		Dimensions of Type TRS Tapping Screws
6 Fasteners—Hexagon products—Widths across flats [ISO]
ISO 272 - 1982 		Fasteners—Hexagon products—Widths across flats
7 Rivet shank diameters [ISO]
ISO 1051 - 1999 		Rivet shank diameters
8 Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T6) - 2013 		Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
9 Dimensions of Hexagon Sockets [ASME]
ASME B 18.3 (Table 18) - 2012 		Dimensions of Hexagon Sockets
10 Recess Dimensions for Oval 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T8) - 2013 		Recess Dimensions for Oval 82° Countersunk Head Screws
11 Type BF and BT, Thread Cutting Tapping Screws [Table 7] [ASME]
ASME B 18.6.4 (BF/BT) - 1998 		Type BF and BT, Thread Cutting Tapping Screws [Table 7]
12 Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13 [DIN]
DIN 78 - 1983 		Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13
13 Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T4) - 2013 		Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only)
14 Thread run-outs and thread undercuts [DIN]
DIN 76-1 - 2016 		Thread run-outs and thread undercuts
15 60° centre holes - Types R. A. B. and C [DIN]
DIN 332 (-1) - 1986 		60° centre holes - Types R. A. B. and C
16 Cross recessed-H type [ISO]
ISO 4757 - 1983 		Cross recessed-H type
17 Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T43) - 2013 		Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
18 Cross recessed-Z type [ISO]
ISO 4757 - 1983 		Cross recessed-Z type
19 Knurle [DIN]
DIN 82 - 1973 		Knurle
20 Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T10) - 2013 		Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws
21 Fasteners - Clearanc holes for bolts and screws [DIN EN]
DIN EN 20273 - 1992 		Fasteners - Clearanc holes for bolts and screws
22 Recess Dimensions for Round Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T39) - 2013 		Recess Dimensions for Round Washer Head Screws
23 Recess Dimensions for Indented Hex Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T33) - 2013 		Recess Dimensions for Indented Hex Washer Head Screws
24 Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters [DIN]
DIN 7500 (-2) - 2016 		Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters
25 Recess Dimensions for Round Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T36) - 2013 		Recess Dimensions for Round Head Screws
26 Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8] [ASME]
ASME B 18.6.4 (D/F/G/T) - 1998 		Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8]
27 Recess Dimensions for Pan Head Screws (Types IA, III, and VI) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T19) - 2013 		Recess Dimensions for Pan Head Screws (Types IA, III, and VI)
28 Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T34) - 2013 		Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws
29 Fasteners—Bolts,screws and studs—Split pins holes and wire holes [ISO]
ISO 7378 - 1983 		Fasteners—Bolts,screws and studs—Split pins holes and wire holes
30 Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T44) - 2013 		Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
31 Recess Dimensions for Binding Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T28) - 2013 		Recess Dimensions for Binding Head Screws (Machine Screws Only)
32 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2005 		Hexalobular internal driving feature for bolts and screws
33 Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series [ISO]
ISO 7994 - 1985 		Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series
34 Tapping screw connections - Guideline values for core hole diameters and use [DIN]
DIN 7975 - 2016 		Tapping screw connections - Guideline values for core hole diameters and use
35 Recess Dimensions for Truss Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T25) - 2013 		Recess Dimensions for Truss Head Screws
36 Body and grip lengths for socket head cap screws [ASME]
ASME B 18.3 (Table 4) - 2012 		Body and grip lengths for socket head cap screws
37 Fasteners—Surface discontinuities— Part2:Nuts [ISO]
ISO 6157-2 - 1995 		Fasteners—Surface discontinuities— Part2:Nuts
38 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T31) - 2013 		Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws
39 Recess Dimensions for Combination Slotted Round Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T37) - 2013 		Recess Dimensions for Combination Slotted Round Head Screws
40 Thread rolling screws for ISO metric thread guidelinge values for hole diameters [DIN]
DIN 7500-2 - 1984 		Thread rolling screws for ISO metric thread guidelinge values for hole diameters
41 Fasteners─Clearance holes for bolts and screws [ISO]
ISO 273 - 1979 		Fasteners─Clearance holes for bolts and screws
42 Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements [ISO]
ISO 6157-1 - 1988 		Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements
43 12 point socket for bolts and screws [DIN]
DIN 34824 - 2007 		12 point socket for bolts and screws
44 Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T48) - 2013 		Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
45 Recess Dimensions for Fillister Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T22) - 2013 		Recess Dimensions for Fillister Head Screws
46 Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T46) - 2013 		Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws
47 Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T47) - 2013 		Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws
48 Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T16) - 2013 		Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws
49 Recess Dimensions for Flat 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T2) - 2013 		Recess Dimensions for Flat 82° Countersunk Head Screws
50 Countersunk head screws - Head configuration and gauging [EN]
EN 27721 - 1991 		Countersunk head screws - Head configuration and gauging
51 Dimensions of Combination Slotted Truss Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T26) - 2013 		Dimensions of Combination Slotted Truss Head Screws
52 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions [EN]
EN 10058 - 2018 		Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
53 Countersunk head screws—Head configuration and guaging [ISO]
ISO 7721 - 1983 		Countersunk head screws—Head configuration and guaging
54 Recess dimensions for Flat Countersunk Trim Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T14) - 2013 		Recess dimensions for Flat Countersunk Trim Head Screws
55 Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T12) - 2013 		Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws
56 Dimensioning and indication of knurling [ISO]
ISO 13444 - 2012 		Dimensioning and indication of knurling
57 Rivet shank diameters (except blind rivets)【ISO 1051:1999】 [GB]
GB 18194 - 2000 		Rivet shank diameters (except blind rivets)【ISO 1051:1999】
58 Hexagon lobuar for fasteners - Type E [GB]
GB 6189 - 1986 		Hexagon lobuar for fasteners - Type E
59 Connections with waisted stud - Tape classification [GB]
GB /T 13807.1 - 2008 		Connections with waisted stud - Tape classification
60 Offset cruciform recess fro rotary fastening devices [GB]
GB /T 12520 - 1990 		Offset cruciform recess fro rotary fastening devices
61 Taper keys of keyways [GB]
GB /T 1563 - 2017 		Taper keys of keyways
62 Fastners - Widths across flats of hexagon products [GB]
GB 3104 - 1982 		Fastners - Widths across flats of hexagon products
63 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2008 		Hexalobular internal driving feature for bolts and screws
64 General purpose bolts and screws - Radius under the head [GB]
GB /T 3105 - 2002 		General purpose bolts and screws - Radius under the head
65 Fasteners - Clearanc holes for bolts and screws [GB]
GB 5277 - 1985 		Fasteners - Clearanc holes for bolts and screws
66 Clearance holes for rivets [GB]
GB 152.1 - 1988 		Clearance holes for rivets
67 Knurl [GB]
GB /T 6403.3 - 2008 		Knurl
68 Woodruff keyways [GB]
GB /T 1098 - 2003 		Woodruff keyways
69 Center holes [GB]
GB /T 145 - 2001 		Center holes
70 Square and rectangular keyways [GB]
GB /T 1095 - 2003 		Square and rectangular keyways
71 Countersunk head screws - Head configuration and gauging [GB]
GB /T 5279 - 1985 		Countersunk head screws - Head configuration and gauging
72 Stress area and bearing area for threaded fasteners [GB]
GB /T 16823.1 - 1997 		Stress area and bearing area for threaded fasteners
73 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD) [GB]
GB /T 3106 - 2016 		Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)
74 Fasteners-Ends of parts with external thread（ISO 4753:2011, MOD） [GB]
GB /T 2 - 2016 		Fasteners-Ends of parts with external thread（ISO 4753:2011, MOD）
75 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2017 		Hexalobular internal driving feature for bolts and screws
76 Fasteners - Split pin holes and wire holes （ISO 7378:1983） [GB]
GB 5278 - 1985 		Fasteners - Split pin holes and wire holes （ISO 7378:1983）
77 Flared couplings - Flared end [GB]
GB /T 5652 - 2008 		Flared couplings - Flared end
78 Countersunk flat head screws - Part2: Penetration depth of cross recesses [GB]
GB /T 5279.2 - 1997 		Countersunk flat head screws - Part2: Penetration depth of cross recesses
79 length of semi-tubular rivets [JIS]
JIS B 1215 (T6) - 1976 		length of semi-tubular rivets
80 Hot-rolled channel steel [GB]
GB 707 - 1988 		Hot-rolled channel steel
81 Countersinks for countersunk head screws [GB]
GB /T 152.2 - 2014 		Countersinks for countersunk head screws
82 Drill diameter for use prior to tapping screw threads [GB]
GB /T 20330 - 2006 		Drill diameter for use prior to tapping screw threads
83 Cross recesses for screws [GB]
GB 944.1 - 1985 		Cross recesses for screws
84 Hexalobular internal driving feature for bolts and screws [JIS]
JIS B 1015 - 2018 		Hexalobular internal driving feature for bolts and screws